Navtex Receiver
A Navtex receiver automatically prints or displays maritime safety information broadcast on 518 kHz in English and 490 kHz in the national language, filtering messages by station and subject so the bridge only sees relevant warnings without anyone standing a radio watch.
What to check on a Navtex Receiver.
9 models from JRC in Navtex Receiver. Below: the full model list.
What Makes a Navtex Receiver Different
A Navtex receiver is a dedicated, narrow-purpose radio receiver that automatically demodulates and prints or displays text broadcasts of maritime safety information, navigational warnings, weather forecasts and warnings, search and rescue information, and ice reports, without requiring a radio operator to tune in or transcribe anything. It listens continuously on 518 kHz for the international English-language broadcast and, where fitted, on 490 kHz for the national-language service, and it filters incoming messages by originating station and by subject code so the bridge team only sees information relevant to the ship's area and interests. That automatic, unattended reception is what distinguishes Navtex from a general MF/HF radio, VHF set, or satellite communication terminal, none of which are built to filter and log safety broadcasts on their own.
Main Components
Receiver and demodulator
Tuned to 518 kHz and 490 kHz, demodulating the narrow-band direct-printing (NBDP) signal used for Navtex broadcasts.
Antenna
A dedicated whip or wire antenna for the MF band, separate from the ship's main MF/HF communication antenna, since Navtex must keep receiving even while other MF equipment transmits.
Read the full guide
Message processor and filter
Decodes the four-character message header, station identifier, subject category such as A for navigational warning or B for weather warning, and message number, and suppresses messages the operator has selected as not relevant or already received.
Display or printer
Older units use a thermal printer producing a paper log; most modern installations use an integrated display with message storage and export, though many ships still keep the printer for a hard-copy record.
Selection and Sizing
- Coverage of both 518 kHz and 490 kHz where the ship trades in waters broadcasting a national-language service
- Message storage capacity and the ability to export or interface with the ship's electronic chart system
- Reliable subject-category filtering, since a receiver that cannot filter buries navigational warnings in low-priority traffic
- Integration with the bridge alarm system so an urgent message triggers an audible alert rather than sitting unread on a display
Regulations and Class
SOLAS Chapter IV requires Navtex reception as part of the Global Maritime Distress and Safety System (GMDSS) for ships trading in sea areas A1 through A3 where Navtex coverage exists, as an alternative or supplement to satellite-based safety information reception. The receiver must carry type approval to the relevant GMDSS performance standard, and its function is checked at survey along with the rest of the GMDSS installation. Certain subject categories, navigational and weather warnings, categories A and B, cannot be deselected by the operator, since SOLAS treats them as always required.
Typical Faults
| Fault | Cause | Consequence |
|---|---|---|
| Missed messages | Wrong station selection for the trading area, or mandatory categories accidentally deselected | Bridge team unaware of navigational or weather warnings in effect |
| Weak or noisy reception | Corroded antenna connection, poor antenna grounding, nearby electrical interference | Garbled or dropped messages, gaps in the safety information log |
| Printer paper or ribbon exhausted unnoticed | No spare consumables kept, low-supply alarm not checked | Loss of hard-copy record even though reception continues |
| Duplicate or repeated messages flooding the log | Message deduplication or station filtering misconfigured | Important new warnings harder to spot among repeats |
What to Look for in a Supplier
- Current GMDSS type approval valid for the flag state and trading areas the ship operates in
- Dual-frequency, 518/490 kHz, capability where the trading pattern requires the national-language service
- A filtering interface the bridge team can actually configure correctly, not one requiring factory support for routine changes
- Spares availability for the antenna, printer consumables and processor unit
Check the station and category selection after every change of trading area; a Navtex set faithfully filtering out the wrong region's warnings gives a false sense of being covered.
Models in this type.
The best-documented model of each manufacturer first, then the next — 9 of 9 models in Navtex Receiver. Every row links to full specifications, documents and service notes.
Manufacturers.
All 21 manufacturers with models of Navtex Receiver. Names with a manufacturer page open it; the others open a search across the full library.
All manufacturersAlso in Navigation & Bridge Equipment.
The other equipment types in this category.
One request. A person reads it and replies by e-mail.
Tell us the manufacturer, the model and what you need — a part, a service call, a second opinion. A person reads every request and replies by e-mail.
No details at hand? A photo of the rating plate or the part is enough — simply attach it to the request.
Three things people ask first.
Is Navtex Receiver data free?
Yes. Every model page, every guide and every datasheet for this type is readable without an account. An account adds saved searches and requests, nothing is taken away.
My model is missing — what now?
Send us the nameplate. We identify it by hand, add it to the library, and if you need a part or a service, the request is already on our desk.
Can you source a Navtex Receiver part?
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.