Skip to content
OceanSphereENGINES
Library› Navigation› Navigation & Bridge Equipment› Marine Display / Monitor
Navigation & Bridge Equipment

Marine Display / Monitor

Marine displays and monitors are the screens on the bridge and in the control room that show charts, radar, alarms and machinery data. They have to survive vibration, wide temperature changes and bright sun, stay readable at night, and meet the environmental and electromagnetic tests set for navigation equipment.

21manufacturers
14 Nov 2026last updated
Knowledge

What to check on a Marine Display / Monitor.

45 models from 21 manufacturers. Below: the manufacturers at a glance and the full model list.

What sets a marine display apart

A consumer or office monitor is built for a stable desk in a controlled room. A marine display sits in a bridge console, an engine control room or a wheelhouse where temperature, humidity and vibration change constantly, and where electromagnetic interference from radars, radios and power equipment can disturb a poorly protected screen. It must also be readable in direct sunlight and dimmable to almost nothing at night, so that the watchkeeper's night vision is not spoiled. Because the screen is often the main interface for an ECDIS, a radar or an integrated bridge system, its failure can take a safety-relevant function with it.

Main designs

  • Bridge monitors for ECDIS, radar and conning displays, often in sizes from the low twenties of inches upward
  • Glass-bridge or multi-function displays that combine navigation, engine and alarm information on large panels
  • Touch displays, with a surface that tolerates damp fingers or gloves and a protective front glass
  • Control-room monitors for machinery automation and alarm systems
  • Panel-mount and console-flush versions, as well as monitors with a standard mounting interface on arms or brackets

Main components

  • LCD panel with a backlight that can be dimmed over a wide range
  • Anti-glare or optically bonded front glass, which also reduces condensation between panel and cover
  • Power supply, designed for the ship's supply variations and often accepting a wide DC or AC range
  • Video inputs such as DVI, HDMI, DisplayPort or VGA, and sometimes network or serial inputs for control
  • Housing with a defined enclosure rating on the front, vibration-damped mounting and, if needed, a touch controller

Selection and sizing

  • Screen size and resolution for the application: an ECDIS has presentation requirements, a conning display has others
  • Brightness range, sunlight readability and the colour palettes for day, dusk and night that the application software expects
  • Environmental category: protected indoor or exposed, which sets temperature, humidity and spray requirements
  • Interfaces to the connected computer or system, and whether the signal can be routed through the existing cable
  • Touch type and behaviour, tested with gloves or damp hands if the bridge conditions need it
  • Mounting cut-out, bezel and cabling, so a replacement fits into the existing console

Regulations and class

Navigation displays are tested to IEC 60945 for environmental and electromagnetic conditions, and the presentation of navigational information is set by the relevant IEC and IMO performance standards. Classification societies issue type approval for monitors used in bridge and automation systems, and the approval is tied to the exact model and size. Compass safe distance is stated for equipment near the magnetic compass, because the magnets and metal parts of a monitor can disturb it.

Typical faults

  • Backlight ageing or failure, giving a dim or uneven screen, often noticed first at night
  • Power supply faults from ageing capacitors, causing flicker or random switch-off
  • Touch drift or dead zones after contamination, scratches or loose connections in the touch controller
  • Pixel defects, image sticking and discolouration with age and heat
  • Cooling fan failure or blocked ventilation in monitors that are not passively cooled
  • Condensation behind the front glass after fast temperature changes

What to look for in a supplier

  • A type-approval certificate that names the exact model and screen size
  • Declared compliance with IEC 60945 and the interface standards the system needs
  • A statement on long-term availability, since panel generations change quickly
  • Replacement backlights, power supplies and touch controllers for older generations
  • Compatibility with the existing ECDIS or radar software, including colour and dimming behaviour

Check the screen at its lowest brightness setting on a dark bridge as part of every bridge inspection. A display that cannot dim far enough is a real fault, not a comfort issue.

Models

Models in this type.

The best-documented model of each manufacturer first, then the next — 45 of 45 models in Marine Display / Monitor. Every row links to full specifications, documents and service notes.

EIZODuraVision FDS and FDU series Exor InternationaleSMART04 FPT IndustrialGO12 XSE FurunoMU-190 TetradyneMarine Monitor TIMX-W215/W238/W240/W260/W270/W190/W230/W320 KEI SystemLCD19GA, KEI-LCD19GA2, KEI-LCD19GD Nirolo Professional DisplaysNIR19AL-10 AFRISODA 10 DEIFiE 7 ISIC24 S-Line Mariner Systems (UK)HP E22 / E24 / E27 G5 FHD Monitors Orion Technology19RTLT, 24RTLT Autic SystemMonitor series AMON KemppiMinarcMig Evo 200 Kongsberg26” Multi-functional Display North Invent NorwayWave II, SMART, and PERFORMANCE monitor series OBEY CO., LIMITED.AT238CBK4-PMAN 23.8 Inch WinMateMarine Bridge System Displays EIZODuraVision MDF2701W Exor InternationaleSMART04M FPT IndustrialGO7 XSR FurunoMU-190V TetradyneTIM-W2XXNH series KEI SystemW21LCD, KEI-W24LCD, KEI-W27LCD Nirolo Professional DisplaysNIR19AL-11 AFRISODA 12 Mariner Systems (UK)HP Series 5 Pro 524pf FHD 23.8-inch Monitor EIZODuraVision MDU5501WT Exor InternationaleSMART07 FPT IndustrialGO9 XSE FurunoMU-192HD TetradyneTIMX-UW series Nirolo Professional DisplaysNIR19V-11 EIZOMDU5501WT Exor InternationaleSMART07M FPT IndustrialNSO16 FurunoMU-270W Fortec BeneluxNottrot Marine Monitors N150KG\ N150KGE, N156KG\ N156KGE, N185KG\ N185KGE, N190KG\ N190KGE, N215KG\ N215KGE, N240KG\ N240KGE, N241KG\ N241KGE, N270KG\ N270KGE Hatteland TechnologyHD 08T30 SCM, HD 13T30 SCM, HD 16T30 SCM, HD 21T30 SCM, HD 24T30 SCM, HD 27T30 SCM SeatronxVSRT- .., SRT-..,PHT-.., Marine Glass Bridge Displays DEIFAGI 407, AGI 410, AGI 415, AGI 421 ISICMarine Monitors 05515-XXX - DuraMON15, 05519-XXX - DuraMON19, 05222-XXX - DuraMON22, 05224-XXX - DuraMON24, 05227-XXX - DuraMON27 Orion Technology19RTLE, 23RTLE, 24RTLE, 27RTLE, 19MDM, 23MDM, 24MDM, 27MDM KEI System15LCD, KEI-17LCD, KEI-19LCD, KEI-21LCD TetradyneMarine monitor Dell P1917S with Anti-vibration kit TVK-DM-001, Marine monitor Dell P2425H with Anti-vibration kit TVK-DM-003, Marine monitor Dell P2725H with Anti-vibration kit TVK-DM-004
45 models
More than the data sheet shows

Write to us about this model — the answer comes by e-mail.

Name the make and the model and what the job is: a spare, a service call, a second opinion on a data sheet. We answer by e-mail.

No details at hand? A photo of the rating plate or the part is enough — simply attach it to the request.

Frequently asked

Questions that come up with this equipment.

Is Marine Display / Monitor data free?

Yes. Every model page, every guide and every datasheet for this type is readable without an account. An account adds saved searches and requests, nothing is taken away.

My model is missing — what now?

Send us the nameplate. We identify it by hand, add it to the library, and if you need a part or a service, the request is already on our desk.

Can you source a Marine Display / Monitor part?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.