Skip to content
OceanSphereENGINES
Library› Deck› Anchor & Mooring Equipment› Anchor Windlass
Anchor & Mooring Equipment

Anchor Windlass

An anchor windlass has to do two different jobs with the same machine: hold a stationary ship against wind and current on the brake alone, and haul in chain under power, and it is usually the brake, not the motor, that fails first.

Data Hidrolik
Knowledge

What to check on an Anchor Windlass.

103 models from Data Hidrolik in Anchor Windlass. Below: the full model list.

What an anchor windlass has to do

The windlass is the machine that pays out and heaves in the anchor chain, and separately from that, holds the ship at anchor once the required scope of chain is out. Those are two different duties on the same machine: heaving power comes from an electric or hydraulic motor through a gearbox to the chain wheel, also called the gypsy or cable lifter, while holding at anchor is done by the chain stopper and the windlass brake, not by the motor, which is normally declutched once the anchor is down. A windlass sized only for heaving-in speed and torque, without enough brake holding capacity, will haul chain in perfectly well and still let the ship drag if the brake is not up to the job.

Anchor windlass arrangement
Anchor windlass on deck: the motor and gearbox drive the cable lifter that takes the anchor chain, with the band brake on the lifter and a warping drum on the same shaft; the chain passes the chain stopper and runs down the spurling pipe into the chain locker.

Legend

  1. Cable lifter (wildcat)
  2. Warping drum
  3. Band brake
  4. Motor and gearbox
  5. Chain stopper
  6. Deck
  7. Spurling pipe
  8. Anchor chain
  9. Chain locker

Main components

  • Chain wheel (gypsy) — the sprocket-like wheel shaped to the chain's link size that engages the chain for heaving; wear here is measured against the chain's own wear limits
  • Motor and gearbox — electric or hydraulic drive delivering heaving speed and torque, sized against the anchor and chain weight to be lifted from the deepest anchoring depth the ship is designed for
  • Band brake — a friction brake around the chain wheel drum that holds the chain when the wheel is declutched from the motor; this is what actually holds the ship at anchor
  • Chain stopper (bow stopper) — a separate mechanical device on deck that takes the anchor's holding load off the windlass entirely once the ship is anchored, so the brake is not left carrying the full load indefinitely
  • Warping drum — often fitted alongside the chain wheel for mooring line handling, sharing the same motor

Selection and sizing

Windlass sizing follows the equipment number calculated for the ship under class rules, which sets anchor weight, chain diameter and grade, and therefore the pull and brake holding capacity the windlass must deliver. The relevant figures are:

  • Chain diameter and grade, grade 3 being common on larger tonnage, which fixes chain wheel profile and required brake torque
  • Heaving speed at rated pull, since class rules set a minimum continuous heaving speed with two anchors and chain hanging free
  • Brake holding capacity, expressed as a multiple of the chain's breaking load, not just of the anchor weight
  • Electric or hydraulic power availability on deck, which sometimes decides the drive type independent of the windlass duty itself

Regulations and class

Class societies size anchoring equipment through the equipment number formula in their rules, based on the ship's displacement, breadth and superstructure area, and this determines anchor mass, chain diameter and length, which the windlass must be able to handle. There is no SOLAS requirement to test windlass brake holding capacity by an actual anchor drop, but class surveys check chain wheel and brake condition, chain stopper operation, and confirm chain markings at each link joint are visible for scope monitoring. Windlass motors and their electrical protection are covered under the ship's general electrical equipment survey.

Read the full guide

Typical faults

FaultCauseConsequence
Brake slipping under loadWorn brake lining, oil contamination, or incorrect brake band adjustmentShip drags anchor in wind or current despite chain paid out correctly
Chain wheel and chain wear mismatchChain wheel not renewed when chain itself was renewed, or vice versaChain slips or jumps on the wheel under load, uneven wear accelerating
Gearbox oil contaminationSeal wear allowing seawater ingressReduced gearbox life, increased heaving motor load
Chain stopper failure to engageCorrosion or mechanical damage to the stopper bar or pinFull anchor holding load left on the windlass brake long-term, accelerating brake wear

What to look for in a supplier

  • Windlass rated pull and brake capacity matched to the equipment number actually calculated for the ship, not a generic size-for-size replacement
  • Chain wheel profile matched to the exact chain diameter and grade fitted
  • Spares availability for brake linings and gearbox components, which are the parts most often needing renewal
  • Documented type test or class approval for the windlass and its brake holding capacity

A windlass that heaves chain smoothly tells you nothing about whether it will hold the ship — that is the brake's job, and the brake is the part most often neglected until the ship drags.

Anchor windlass
Anchor windlass. Photo: The original uploader was Leonard G. at English Wikipedia., CC SA 1.0, via Wikimedia Commons
Models

Models in this type.

The best-documented model of each manufacturer first, then the next — 100 of 103 models in Anchor Windlass. Every row links to full specifications, documents and service notes.

Page 1 of 2 · Next →
Showing only Data Hidrolik. Show all manufacturers
Data HidrolikDZC 5000 5750 Data Hidrolik1702E Data Hidrolik1702H Data Hidrolik2002E Data Hidrolik2002H Data Hidrolik3302E Data Hidrolik3302H Data Hidrolik5002E Data Hidrolik5002H Data Hidrolik902E Data Hidrolik902E-AC Data Hidrolik902E-DC Data Hidrolik902H Data HidrolikB - 12.5 L Data HidrolikB - 18 K Data HidrolikDZC 1000 Data HidrolikDZC 1001/1002 Data HidrolikDZC 11000 Data HidrolikDZC 11000 - 2 EPL Data HidrolikDZC 11000E Data HidrolikDZC 11000E-AC Data HidrolikDZC 11000H Data HidrolikDZC 12001 Data HidrolikDZC 12001/12002 Data HidrolikDZC 12001E/DZC 12001H Data HidrolikDZC 12002 E Data HidrolikDZC 1201 Data HidrolikDZC 1201/1202 Data HidrolikDZC 1400 Data HidrolikDZC 1400 - 1 EW Data HidrolikDZC 1400E Data HidrolikDZC 1400E-AC Data HidrolikDZC 1400E-DC Data HidrolikDZC 1400H Data HidrolikDZC 1701 Data HidrolikDZC 1701 H / BS - 14 K E, H Data HidrolikDZC 1701/1702 Data HidrolikDZC 1701E Data HidrolikDZC 1701H Data HidrolikDZC 2001 Data HidrolikDZC 2001E Data HidrolikDZC 2001H Data HidrolikDZC 2002 H / PM - 17.5L Data HidrolikDZC 2200 Data HidrolikDZC 2200 - 2 HPI/Kr - 16 L Data HidrolikDZC 2200-2 HPI/Kr-18K Data HidrolikDZC 2200E Data HidrolikDZC 2200E-AC Data HidrolikDZC 2200H Data HidrolikDZC 3300 Data HidrolikDZC 3300 - 1 EPL Data HidrolikDZC 3300E Data HidrolikDZC 3300E-AC Data HidrolikDZC 3300H Data HidrolikDZC 3301 Data HidrolikDZC 3301 EL Data HidrolikDZC 3301/3302 Data HidrolikDZC 3301E Data HidrolikDZC 3301H Data HidrolikDZC 3501 Data HidrolikDZC 3501/3502 Data HidrolikDZC 401 Data HidrolikDZC 401 E / 1224 - 10K Data HidrolikDZC 401E Data HidrolikDZC 440 Data HidrolikDZC 440 EKr Data HidrolikDZC 440E / 450E Data HidrolikDZC 450 Data HidrolikDZC 450 E E Data HidrolikDZC 450 EB Data HidrolikDZC 5000 - 2 EPI Data HidrolikDZC 5000E Data HidrolikDZC 5000E-AC Data HidrolikDZC 5000H Data HidrolikDZC 5001 Data HidrolikDZC 5001E Data HidrolikDZC 5001H Data HidrolikDZC 7000 Data HidrolikDZC 7000 - 2 HPI/ Kr - 28 L Data HidrolikDZC 7000E Data HidrolikDZC 7000E-AC Data HidrolikDZC 7000H Data HidrolikDZC 7001 Data HidrolikDZC 7001E/DZC 7001H Data HidrolikDZC 901 Data HidrolikDZC 901/902 Data HidrolikDZC 901E Data HidrolikDZC 901H Data HidrolikDZC1201H Data HidrolikDZC1202H Data HidrolikEV 040/EV 030 Data HidrolikKr - 24L Data HidrolikP - 19L Data HidrolikP - 32L Data HidrolikP-22 Data HidrolikP-36L Data Hidrolik1212 - 8 Data Hidrolik1224 - 10 Data Hidrolik5001-1 Data Hidrolik7001 1 gypsy 1 warping drum
By manufacturer

Manufacturers.

All 69 manufacturers with models of Anchor Windlass. Names with a manufacturer page open it; the others open a search across the full library.

All manufacturers in the library
Show all 69 manufacturers
More than the data sheet shows

Write to us about this model — the answer comes by e-mail.

Name the make and the model and what the job is: a spare, a service call, a second opinion on a data sheet. We answer by e-mail.

No details at hand? A photo of the rating plate or the part is enough — simply attach it to the request.

Frequently asked

Questions that come up with this equipment.

Is Anchor Windlass data free?

Yes. Every model page, every guide and every datasheet for this type is readable without an account. An account adds saved searches and requests, nothing is taken away.

My model is missing — what now?

Send us the nameplate. We identify it by hand, add it to the library, and if you need a part or a service, the request is already on our desk.

Can you source a Anchor Windlass part?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.