DZC 5000
Data Hidrolik DZC 5000 — Vertical anchor windlass for boats up to 70 meters.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Inspect brake band friction linings for wear thickness; verify brake holding capacity under load; check brake band adjustment and tightness of fixing plates
Visually inspect gypsy teeth for wear or damage; verify chain fits snugly in gypsy without slipping; check for proper load holding before deployment
Test clutch engagement and disengagement operation; verify smooth transition between gypsy and warping drum; check for bearing play or worn clutch teeth
Inspect stainless steel drive shaft for corrosion, bending, or surface defects; verify bearing condition and lubrication levels; check for unusual vibration or grinding noises during operation
Sample hydraulic oil for contamination and degradation; verify system pressure against specifications; inspect hose connections for leaks; bleed air from system
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →