Skip to content
OceanSphereENGINES
Library› Engine Room› Main Engines (4-Stroke)› Main Engine 4-Stroke
Main Engines (4-Stroke)

Main Engine 4-Stroke

A four-stroke main engine completes intake, compression, power and exhaust in four piston strokes per cycle, turns far faster than a slow-speed two-stroke of comparable power, and needs a reduction gearbox to bring propeller shaft speed down to something a propeller can use.

Yanmar
Knowledge

What to check on a Main Engine 4-Stroke.

262 models from Yanmar in Main Engine 4-Stroke. Below: the full model list.

What sets four-stroke main engines apart

A four-stroke main engine fires once every two crankshaft revolutions, cycling through intake, compression, power and exhaust, compared with the once-per-revolution cycle of a slow-speed two-stroke. That extra mechanical step is what a camshaft and valve train are for, and it is the defining difference from the crosshead two-stroke engines used as direct-drive propulsion on large tankers and container ships. Running at medium speed, typically from a few hundred up to just over a thousand RPM depending on bore size, a four-stroke main engine turns far faster than a propeller wants to go, so it drives the shaft through a reduction gearbox rather than directly. This is also what lets several engines share one gearbox and one propeller shaft, a configuration common on ferries and offshore vessels that two-stroke propulsion cannot offer.

Four-stroke marine diesel engine section
Section through one cylinder of a four-stroke marine diesel engine showing the cylinder head with intake and exhaust valves driven from the camshaft, the piston with its rings running in the cylinder liner, the connecting rod to the crankshaft, and the exhaust gas path to the turbocharger.

Legend

  1. Camshaft
  2. Cylinder head
  3. Intake valve
  4. Exhaust valve
  5. Piston and rings
  6. Exhaust gas to turbine
  7. Turbocharger
  8. Cylinder liner
  9. Connecting rod
  10. Crankshaft

Main components

Cylinder block and trunk piston

Unlike a two-stroke's crosshead design, a four-stroke uses a trunk piston that takes side thrust directly from the connecting rod, which keeps the engine shorter and lighter for its power but puts more load on the piston skirt and cylinder liner.

Camshaft and valve train

Gear- or chain-driven camshafts operate intake and exhaust valves in the cylinder head, timed to the four-stroke cycle. This valve train is a maintenance item in its own right, since clearance checks, valve seat wear and camshaft bearing condition all need periodic attention that a two-stroke's simpler port arrangement does not.

Read the full guide

Turbocharger and charge air system

Exhaust-driven turbochargers, usually one or two per engine depending on cylinder count, force air into the cylinders to make up for the shorter, faster cycle producing less natural aspiration than a large slow-speed engine.

Fuel injection

Modern medium-speed engines increasingly use common-rail injection, which allows injection timing and pressure to be controlled independently of engine speed; older and simpler designs still use jerk-pump systems driven mechanically off the camshaft.

Reduction gearbox

Brings engine output speed down to propeller shaft speed, and on multi-engine installations combines the output of two or more engines onto a single shaft, often with clutches so individual engines can be taken offline.

Selection and sizing

Power output, cylinder count and configuration, inline or V, are set by the required propulsion power and the space available in the engine room, since a V-configuration packs more cylinders into a shorter engine room at the cost of width. Speed rating interacts directly with gearbox ratio selection, and fuel flexibility, whether marine diesel oil only or dual-fuel gas capability, is decided at the ordering stage because it changes the whole fuel system, not just the engine.

  • Rated power and speed at the propeller design point, not just the engine's maximum continuous rating
  • Number of engines per gearbox and the redundancy that gives against a single engine failure
  • Fuel flexibility, whether single fuel, dual fuel, or ready for a future retrofit
  • Space and weight against the engine room layout, particularly for multi-engine diesel-electric arrangements

Regulations and class

Main engines are surveyed under the class society's periodic survey scheme, with continuous machinery survey as an option on many vessels. Emissions are governed by MARPOL Annex VI, which sets NOx limits by engine build date and operating area, with tighter Tier III limits inside Emission Control Areas that most modern medium-speed engines meet through selective catalytic reduction or exhaust gas recirculation rather than engine design alone. Fuel sulphur limits under the same annex apply regardless of engine type.

Typical faults

CauseConsequence
Valve clearance drift or valve seat wearLoss of compression, rough running, burnt valves if left unchecked
Turbocharger fouling or bearing wearFalling charge air pressure, black smoke, reduced power
Injector wear or common-rail leakagePoor combustion, cylinder-to-cylinder imbalance, increased fuel consumption
Trunk piston skirt or liner wearIncreased blow-by, rising lube oil consumption, eventual liner replacement

What to look for in a supplier

  • Global service network, since medium-speed engines are worked hard on tight schedules and need parts and technicians available where the ship trades
  • Confirmed emission compliance for the intended trading area, not just the engine's country of build
  • Spare parts commonality across a fleet if the operator runs several sister ships
  • Documented condition monitoring support, since vibration and performance trending catch turbocharger and bearing problems before they become failures

Track charge air pressure and exhaust temperature spread across cylinders on every watch - a single cylinder drifting away from its sisters is usually the first sign of an injector or valve problem, long before it shows up as lost power.

Models

Models in this type.

The best-documented model of each manufacturer first, then the next — 100 of 262 models in Main Engine 4-Stroke. Every row links to full specifications, documents and service notes.

Page 1 of 3 · Next →
Showing only Yanmar. Show all manufacturers
Yanmar Power Technology Co., Ltd. Tsukaguchi Factory6HYM-WET Yanmar12AYM-WET 1,220 kW Yanmar Power Solutions Co., Ltd. Tsukaguchi Factory12AYM-WGT/WET/WST, 12AYL-WET/WSET Yanmar Power Technology6N165L Yanmar12AYM-WGT 1,340 kW Yanmar Power SolutionsNY16 Yanmar Power Technology Co., Ltd. Tsukaguchi FactoryAYEM Yanmar3YM27A 19.4 kW Yanmar Power Solutions Co., Ltd. Tsukaguchi Factory6GY135 Yanmar Power TechnologyEY18 Yanmar3YM27AK 19.4 kW Yanmar Power TechnologyEY21ALW(S) Yanmar4CHE3 57.4 kW Yanmar Power TechnologyEY33(L)W Yanmar4JH3-HTZY1 66.2 kW Yanmar Power Technology Co., Ltd. Tsukaguchi FactoryHAL2, HA2M Yanmar5N18L 900 kW Yanmar Power Technology Co., Ltd. Tsukaguchi FactoryRCD2-2YM15X1 Yanmar5N21L 1,250 kW Yanmar Power Technology Co., Ltd. Tsukaguchi FactoryRCD2-3JH40X1 Yanmar6AYAM-ET 555 kW Yanmar Power Technology Co., Ltd. Tsukaguchi FactoryRCD2-3YM30X1 Yanmar6AYEM-ET 599 kW Yanmar Power Technology Co., Ltd. Tsukaguchi FactoryRCD2-4JH11X1 Yanmar6AYEM-ST 485 kW Yanmar Power Technology Co., Ltd. Tsukaguchi FactoryRCD2-4JH57X1 Yanmar6AYL-ET 600 kW Yanmar Power Technology Co., Ltd. Tsukaguchi FactoryRCD2-4LVX1 Yanmar6AYM-WET 610 kW Yanmar Power Technology Co., Ltd. Tsukaguchi FactoryRCD2-6LY44X1 Yanmar6AYM-WGT 670 kW Yanmar Power Technology Co., Ltd. Tsukaguchi FactoryRCD2-8LVX1 Yanmar6AYM-WST 485 kW Yanmar Power Technology Co., Ltd. Tsukaguchi FactoryRCD2-3JH5X1 Yanmar6CH-HTE3 125 kW Yanmar Power TechnologyMYDXN.570P2N 10 kW Yanmar6CH-WUTE 188 kW Yanmar Power TechnologyMYDXN.854P3N 15 kW Yanmar6CHE3 84.6 kW Yanmar Power TechnologyNYDXN.570P2N 10 kW Yanmar6EY17W 374 kW Yanmar Power TechnologyNYDXN.854P3N 15 kW Yanmar6EY22AW 885 kW Yanmar Power TechnologyPYDXN.570P2N 10 kW Yanmar6EY22LW 2,220 kW Yanmar Power TechnologyPYDXN.854P3N 15 kW Yanmar6EY22W 2,040 kW Yanmar Power TechnologyRYDXN.570P2N 10 kW Yanmar6EY26W 3,300 kW Yanmar Power TechnologyRYDXN.854P3N 15 kW Yanmar6EY33W 2,500 kW Yanmar6HA2M-WDT 298 kW Yanmar6HA2M-WHT 257 kW Yanmar6L6AY 480 kW Yanmar6L6AY26 2,490 kW Yanmar6L6AYM-ET 492 kW Yanmar6L6AYM-GTE 510 kW Yanmar6L6EY18 960 kW Yanmar6L6EY18AL 1,020 kW Yanmar6L6EY18W 990 kW Yanmar6L6EY22 1,500 kW Yanmar6L6EY22AL 1,410 kW Yanmar6L6EY22W 1,560 kW Yanmar6L6EY26 2,220 kW Yanmar6L6EY26LW 2,280 kW Yanmar6L6EY26W 2,430 kW Yanmar6L6EY33 3,120 kW Yanmar6L6EY33W 3,180 kW Yanmar6L6HYM-WET 468 kW Yanmar6L6LAAM 450 kW Yanmar6L6MALM 432 kW Yanmar6L6N18AL 960 kW Yanmar6L6N18AL-DV 1,050 kW Yanmar6L6N18L 1,020 kW Yanmar6L6N21AL-EV 1,170 kW Yanmar6L6N21L 1,260 kW Yanmar6L6N26L 2,250 kW Yanmar6L6N330-EN 3,120 kW Yanmar6L6N330-EW 3,180 kW Yanmar6L6NY16 498 kW Yanmar6L6NY16L 528 kW Yanmar6N18L 1,080 kW Yanmar6N21A-DW 662 kW Yanmar6N21A-EW 956 kW Yanmar6N21A-SW 883 kW Yanmar6N21A-UW 736 kW Yanmar6N21L 1,500 kW Yanmar8AYL-ET 800 kW Yanmar8EY26W 2,060 kW Yanmar8EY33W 3,600 kW Yanmar8L6EY33W 4,240 kW Yanmar8L6N18L 1,360 kW Yanmar8L6N21L 1,680 kW Yanmar8L6N26L 3,000 kW Yanmar8L8MALM 576 kW Yanmar8L8N330-EN 4,160 kW Yanmar6AY 360 kW Yanmar6AYS 480 kW Yanmar6EY22 1,560 kW Yanmar6EY26 2,340 kW
By manufacturer

Manufacturers.

All 120 manufacturers with models of Main Engine 4-Stroke. Names with a manufacturer page open it; the others open a search across the full library.

All manufacturers in the library
Show all 120 manufacturers
Related types

Also in Main Engines (4-Stroke).

The other equipment types in this category.

Dual-Fuel Engine (Marine)Main Engine (4-Stroke Trunk Piston)Medium-Speed Diesel Engine

Inspection findings for this equipment

From public port state control and US Coast Guard records; OceanSphere assigns them to this equipment type from the descriptions.

Deficiency codes – USCG port state control – foreign-flag vessels

USCG components

Investigation reports

All inspection & safety data ›

More than the data sheet shows

Write to us about your machine — the answer comes by e-mail.

Name the make and the model and what the job is: a spare, a service call, a second opinion on a data sheet. We answer by e-mail.

No details at hand? A photo of the rating plate or the part is enough — simply attach it to the request.

Frequently asked

Questions that come up with this equipment.

Is Main Engine 4-Stroke data free?

Yes. Every model page, every guide and every datasheet for this type is readable without an account. An account adds saved searches and requests, nothing is taken away.

My model is missing — what now?

Send us the nameplate. We identify it by hand, add it to the library, and if you need a part or a service, the request is already on our desk.

Can you source a Main Engine 4-Stroke part?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.