Skip to content
OceanSphereENGINES
Library› Deck› Deck Cranes› Pedestal Crane
Deck Cranes

Pedestal Crane

A pedestal crane is bolted to a fixed foundation welded into the ship's structure and slews around that single point, the design used for the sustained, repeated lifts of cargo and stores handling rather than the occasional lift a davit is built for.

Palfinger Marine Safety
Knowledge

What to check on a Pedestal Crane.

19 models from Palfinger Marine Safety in Pedestal Crane. Below: the full model list.

What makes this type distinct

A pedestal crane's defining feature is the fixed vertical column, or pedestal, through which the slewing ring, hydraulic or electric drive, and all loads pass down into a reinforced foundation in the ship's deck structure. This differs from a knuckle boom crane's articulated arm geometry and from a gantry crane's travelling rail-mounted base: a pedestal crane slews on a single fixed point and its boom, whether telescopic, articulated or fixed-length, does the reach and luffing. On offshore supply and support vessels, pedestal cranes are frequently rated for both cargo transfer and personnel or basket handling, which brings a stricter certification regime than a straight cargo-only unit.

Pedestal crane arrangement
Side elevation of a pedestal crane showing the fixed pedestal foundation, slewing ring, machinery house, boom with luffing cylinder, and the hoist wire running over the boom tip to the hook block.

Legend

  1. Boom (jib)
  2. Luffing cylinder
  3. Machinery house (winches)
  4. Hoist wire
  5. Slewing ring bearing
  6. Pedestal (fixed foundation)
  7. Hook block (load)
  8. Deck

Main components

Pedestal and foundation

Welded steel column transmitting all crane loads into deck girders and structure specifically reinforced to take the overturning moment of a working crane, not just its static weight.

Slewing ring and drive

Large-diameter bearing allowing full or limited slew rotation, driven hydraulically or electrically, with a slew brake holding position against wind and vessel motion.

Read the full guide

Boom

Telescopic, articulated (knuckle) or fixed lattice boom carrying the load block; telescopic booms give continuous reach adjustment, articulated booms fold compactly for stowage.

Winch and wire rope system

Main and auxiliary hoist winches, wire rope, and the load block or hook; offshore units add a heave compensation function to reduce load swing in a seaway.

Power pack and control station

Hydraulic power unit or electric drive package, with a cab or remote pendant control offering the operator sightlines over the working area.

Selection and sizing

The safe working load (SWL) at maximum outreach, not the nominal maximum SWL near the pedestal, is the figure that governs whether the crane can do the job, since capacity falls off sharply as the boom extends. Selection also depends on:

  • Required outreach over the side and the deck layout it must clear.
  • Duty cycle: continuous cargo handling stresses the drive and structure differently to occasional stores lifts.
  • Personnel transfer rating, if the crane will move crew in a basket or transfer to another vessel, which requires a dedicated certification beyond standard cargo SWL.
  • Motion compensation needs on vessels working alongside offshore structures in a seaway.

Regulations and class

Class societies certify lifting appliances under their own rules for cranes and lifting gear, with proof load testing before entry into service and periodic thorough examination thereafter, typically annual visual and functional checks with a full load test at longer intervals. Personnel lifting adds requirements drawn from offshore industry codes beyond baseline class rules, including redundant brakes and specific factors of safety on the wire rope and structure. Load charts, certificates and the examination record must be kept aboard and available for inspection.

Typical faults

FaultConsequence
Slewing ring bearing wear from continuous cargo cyclesIncreased play, uneven slewing, eventual replacement requiring the crane out of service for an extended period
Wire rope fatigue and broken wires, especially at the boom head sheaveReduced breaking strength, mandatory rope discard well before visible failure
Hydraulic cylinder seal leakage on luffing or telescoping ramsLoss of boom position holding, drift under load
Load moment indicator sensor driftOperator working without an accurate overload warning, the root cause behind a large share of crane incidents

What to look for in a supplier

  • Full load charts for every configuration the crane will actually be used in, not just the maximum-capacity case.
  • Class type approval and, if personnel lifting is required, the relevant offshore certification.
  • Spares and service support for the specific hydraulic or electric drive package fitted, since crane downtime stops cargo or stores operations directly.
  • Track record of the slewing ring and winch components under continuous duty, not just occasional-lift service.

Read the load chart at the actual outreach the lift needs, not the crane's headline SWL; more cranes are overloaded by working too far out than by lifting too heavy a single item.

By manufacturer

Manufacturers.

All 10 manufacturers with models of Pedestal Crane. Names with a manufacturer page open it; the others open a search across the full library.

All manufacturers in the library
More than the data sheet shows

Write to us about your machine — the answer comes by e-mail.

Name the make and the model and what the job is: a spare, a service call, a second opinion on a data sheet. We answer by e-mail.

No details at hand? A photo of the rating plate or the part is enough — simply attach it to the request.

Frequently asked

Questions that come up with this equipment.

Is Pedestal Crane data free?

Yes. Every model page, every guide and every datasheet for this type is readable without an account. An account adds saved searches and requests, nothing is taken away.

My model is missing — what now?

Send us the nameplate. We identify it by hand, add it to the library, and if you need a part or a service, the request is already on our desk.

Can you source a Pedestal Crane part?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.