Skip to content
OceanSphereENGINES
Library› Engine Room› Main Engines (4-Stroke)› Main Engine 4-Stroke
Main Engines (4-Stroke)

Main Engine 4-Stroke

A four-stroke main engine completes intake, compression, power and exhaust in four piston strokes per cycle, turns far faster than a slow-speed two-stroke of comparable power, and needs a reduction gearbox to bring propeller shaft speed down to something a propeller can use.

Cummins
Knowledge

What to check on a Main Engine 4-Stroke.

81 models from Cummins in Main Engine 4-Stroke. Below: the full model list.

What sets four-stroke main engines apart

A four-stroke main engine fires once every two crankshaft revolutions, cycling through intake, compression, power and exhaust, compared with the once-per-revolution cycle of a slow-speed two-stroke. That extra mechanical step is what a camshaft and valve train are for, and it is the defining difference from the crosshead two-stroke engines used as direct-drive propulsion on large tankers and container ships. Running at medium speed, typically from a few hundred up to just over a thousand RPM depending on bore size, a four-stroke main engine turns far faster than a propeller wants to go, so it drives the shaft through a reduction gearbox rather than directly. This is also what lets several engines share one gearbox and one propeller shaft, a configuration common on ferries and offshore vessels that two-stroke propulsion cannot offer.

Four-stroke marine diesel engine section
Section through one cylinder of a four-stroke marine diesel engine showing the cylinder head with intake and exhaust valves driven from the camshaft, the piston with its rings running in the cylinder liner, the connecting rod to the crankshaft, and the exhaust gas path to the turbocharger.

Legend

  1. Camshaft
  2. Cylinder head
  3. Intake valve
  4. Exhaust valve
  5. Piston and rings
  6. Exhaust gas to turbine
  7. Turbocharger
  8. Cylinder liner
  9. Connecting rod
  10. Crankshaft

Main components

Cylinder block and trunk piston

Unlike a two-stroke's crosshead design, a four-stroke uses a trunk piston that takes side thrust directly from the connecting rod, which keeps the engine shorter and lighter for its power but puts more load on the piston skirt and cylinder liner.

Camshaft and valve train

Gear- or chain-driven camshafts operate intake and exhaust valves in the cylinder head, timed to the four-stroke cycle. This valve train is a maintenance item in its own right, since clearance checks, valve seat wear and camshaft bearing condition all need periodic attention that a two-stroke's simpler port arrangement does not.

Read the full guide

Turbocharger and charge air system

Exhaust-driven turbochargers, usually one or two per engine depending on cylinder count, force air into the cylinders to make up for the shorter, faster cycle producing less natural aspiration than a large slow-speed engine.

Fuel injection

Modern medium-speed engines increasingly use common-rail injection, which allows injection timing and pressure to be controlled independently of engine speed; older and simpler designs still use jerk-pump systems driven mechanically off the camshaft.

Reduction gearbox

Brings engine output speed down to propeller shaft speed, and on multi-engine installations combines the output of two or more engines onto a single shaft, often with clutches so individual engines can be taken offline.

Selection and sizing

Power output, cylinder count and configuration, inline or V, are set by the required propulsion power and the space available in the engine room, since a V-configuration packs more cylinders into a shorter engine room at the cost of width. Speed rating interacts directly with gearbox ratio selection, and fuel flexibility, whether marine diesel oil only or dual-fuel gas capability, is decided at the ordering stage because it changes the whole fuel system, not just the engine.

  • Rated power and speed at the propeller design point, not just the engine's maximum continuous rating
  • Number of engines per gearbox and the redundancy that gives against a single engine failure
  • Fuel flexibility, whether single fuel, dual fuel, or ready for a future retrofit
  • Space and weight against the engine room layout, particularly for multi-engine diesel-electric arrangements

Regulations and class

Main engines are surveyed under the class society's periodic survey scheme, with continuous machinery survey as an option on many vessels. Emissions are governed by MARPOL Annex VI, which sets NOx limits by engine build date and operating area, with tighter Tier III limits inside Emission Control Areas that most modern medium-speed engines meet through selective catalytic reduction or exhaust gas recirculation rather than engine design alone. Fuel sulphur limits under the same annex apply regardless of engine type.

Typical faults

CauseConsequence
Valve clearance drift or valve seat wearLoss of compression, rough running, burnt valves if left unchecked
Turbocharger fouling or bearing wearFalling charge air pressure, black smoke, reduced power
Injector wear or common-rail leakagePoor combustion, cylinder-to-cylinder imbalance, increased fuel consumption
Trunk piston skirt or liner wearIncreased blow-by, rising lube oil consumption, eventual liner replacement

What to look for in a supplier

  • Global service network, since medium-speed engines are worked hard on tight schedules and need parts and technicians available where the ship trades
  • Confirmed emission compliance for the intended trading area, not just the engine's country of build
  • Spare parts commonality across a fleet if the operator runs several sister ships
  • Documented condition monitoring support, since vibration and performance trending catch turbocharger and bearing problems before they become failures

Track charge air pressure and exhaust temperature spread across cylinders on every watch - a single cylinder drifting away from its sisters is usually the first sign of an injector or valve problem, long before it shows up as lost power.

Models

Models in this type.

The best-documented model of each manufacturer first, then the next — 81 of 81 models in Main Engine 4-Stroke. Every row links to full specifications, documents and service notes.

Showing only Cummins. Show all manufacturers
Cummins12VK38-M 1,380 kW Cummins12VKTA38-M2 1,464 kW Cummins12VQSK38 1,560 kW Cummins12VQSK38 M 1,596 kW Cummins Marine12VQSK38-M 1,320 kW Cummins12VQSK45 1,740 kW Cummins12VQST30 1,020 kW Cummins16VK50-M 1,888 kW Cummins16VKTA50-M2 1,952 kW Cummins16VQSK50 2,080 kW Cummins16VQSK50 M 2,128 kW Cummins Marine16VQSK50-M 1,840 kW Cummins16VQSK60 2,368 kW Cummins16VQSK60 M2 2,432 kW Cummins16VQSK95 2,640 kW Cummins18VQSK78 2,790 kW Cummins18VQSK78 M2 2,916 kW Cummins18VQSK78-M 2,880 kW Cummins6LKTA19-M3 750 kW Cummins Marine6LNTA855-M 300 kW Cummins6LQSK19 780 kW Cummins6LQSK19 M 798 kW Cummins Marine6LQSK19-M 660 kW Cummins6LQSM11 432 kW CumminsKTA38-M CumminsKTA50-M2 1,628 kW CumminsQSK50 Marine CumminsQSK60 Marine CumminsKTA50-DM 1,700 kW CumminsKTA50-G 1,491 kW CumminsM10T-R 157 kW CumminsM10TA-R 265 kW CumminsM14QTA 441 kW CumminsM18QTA 526 kW CumminsM18QTA-R 492 kW CumminsM23TA-R 358 kW CumminsM32QTA 492 kW CumminsM32QTA01 597 kW CumminsM32QTA04 1,148 kW CumminsM32TA 746 kW CumminsM32TA-R 447 kW CumminsM38QTA04 2,300 kW CumminsMR18QTA 526 kW CumminsQSK60-DM 2,013 kW CumminsQSK60-G 1,800 kW CumminsQSK78-G 2,500 kW Cummins12VKTA38-M Cummins Marine12VKTA38-M Cummins16VKTA50-M Cummins Marine16VKTA50-M Cummins16VQSK60-M Cummins Marine16VQSK60-M Cummins4 cycle, Turbocharged Cummins6LK19-M Cummins Marine6LK19-M Cummins6LKTA19-M Cummins Marine6LKTA19-M CumminsB4.5-DM CumminsDM1 CumminsK19 series CumminsM10QTA CumminsMCRS CumminsNTA855 CumminsQSB6.7 CumminsQSB7-DM CumminsQSK19 CumminsQSK19-G4 CumminsQSK19-G5 CumminsQSK19G5 CumminsQSK38, QSK50 CumminsQSK38-M1 CumminsQSK50-M1 CumminsQSK60-M, QSK60-DM CumminsQSK95-M, QSK95-DM CumminsQSM11 CumminsX15 Cummins9CEXW019.AAB 485 kW CumminsKTA38-M, KTA50-M, KTA38-DM, KTA50-DM CumminsNT855-M, NTA855-M, NT855-D(M), NTA855-D(M) CumminsKCEXN08.9AAB 336 kW CumminsLCEXN08.9AAB 336 kW
By manufacturer

Manufacturers.

All 120 manufacturers with models of Main Engine 4-Stroke. Names with a manufacturer page open it; the others open a search across the full library.

All manufacturers in the library
Show all 120 manufacturers
Related types

Also in Main Engines (4-Stroke).

The other equipment types in this category.

Dual-Fuel Engine (Marine)Main Engine (4-Stroke Trunk Piston)Medium-Speed Diesel Engine

Inspection findings for this equipment

From public port state control and US Coast Guard records; OceanSphere assigns them to this equipment type from the descriptions.

Deficiency codes – USCG port state control – foreign-flag vessels

USCG components

Investigation reports

All inspection & safety data ›

More than the data sheet shows

Write to us about your machine — the answer comes by e-mail.

Name the make and the model and what the job is: a spare, a service call, a second opinion on a data sheet. We answer by e-mail.

No details at hand? A photo of the rating plate or the part is enough — simply attach it to the request.

Frequently asked

Questions that come up with this equipment.

Is Main Engine 4-Stroke data free?

Yes. Every model page, every guide and every datasheet for this type is readable without an account. An account adds saved searches and requests, nothing is taken away.

My model is missing — what now?

Send us the nameplate. We identify it by hand, add it to the library, and if you need a part or a service, the request is already on our desk.

Can you source a Main Engine 4-Stroke part?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.