Skip to content
OceanSphereENGINES
Library› Electrical› Battery & UPS Systems› Lead-Acid Battery Bank
Battery & UPS Systems

Lead-Acid Battery Bank

A lead-acid battery bank is a series-parallel string of flooded or valve-regulated (VRLA) cells that fixes a DC bus at 24V, 110V or 220V; it remains standard for engine starting and emergency duty because it tolerates continuous float charge for fifteen years or more without the balancing circuitry lithium banks require.

22manufacturers
10 Oct 2026last updated
Knowledge

What to check on a Lead-Acid Battery Bank.

126 models from 22 manufacturers. Below: the manufacturers at a glance and the full model list.

What sets a lead-acid bank apart from other chemistries

A lead-acid bank works on the same reversible reaction as a car battery, scaled up into individual 2V cells that are strung in series to reach the ship's DC bus voltage, typically 24V for starting and control circuits or up to 220V for larger emergency banks. Compared with nickel-cadmium or lithium iron phosphate alternatives, lead-acid tolerates being held on permanent float charge without active cell balancing, self-discharges slowly enough for infrequent standby duty, and its failure mode is gradual capacity loss rather than sudden thermal runaway. The trade-off is weight, a shorter cycle life under deep discharge, and the need for periodic electrolyte maintenance on flooded types.

Lead-acid battery bank arrangement
Physical arrangement of a lead-acid battery bank: individual 2V cells linked by series straps into a string, its positive and negative terminals feeding the battery charger and the DC distribution or engine-start circuit.

Legend

  1. battery charger
  2. to DC distribution / engine start
  3. cell (2V)
  4. series string (12V)
  5. - terminal
  6. + terminal

Main components

Cells and plates

Each cell holds positive and negative lead plates separated by microporous separators, immersed in dilute sulphuric acid. Flooded cells expose the electrolyte for topping up with distilled water; VRLA (gel or AGM) cells hold the electrolyte immobilised and are sealed except for a pressure relief valve, trading maintenance access for a lower risk of acid spill and no requirement for a dedicated acid-resistant space.

Battery box and ventilation

Charging releases hydrogen, so the box and the compartment it sits in need forced or natural ventilation sized to keep hydrogen concentration well under the lower explosive limit. Class rules typically require the battery locker to be gas-tight from other spaces, with ventilation trunking leading directly outside and no ignition sources such as switches or fittings inside the locker itself.

Read the full guide

Charger and distribution

A three-stage charger (bulk, absorption, float) keeps the bank topped up without boiling off electrolyte. Emergency banks feed their loads through a dedicated distribution board with fusing sized to the cell manufacturer's short-circuit current, since a shorted lead-acid string can deliver several thousand amps for a brief period.

Selection and sizing

Sizing starts from the connected load in amp-hours over the required autonomy period, then derates for the minimum expected temperature (capacity drops noticeably below 0°C) and for the ageing margin the operator wants at replacement time.

  • Autonomy required by class for navigation lights, alarms and radio: commonly 6 to 36 hours depending on ship type and equipment.
  • Ampere-hour capacity at the C10 or C20 discharge rate quoted by the manufacturer, not the higher-rate figure.
  • Float voltage and temperature compensation range of the charger, matched to the cell chemistry.
  • Physical footprint and weight, since a fully sized bank for a large emergency load can run to several hundred kilograms.

Regulations and class requirements

SOLAS Ch. II-1 sets the autonomy required for the emergency source of electrical power on the ship types it covers, and class societies specify the ventilation, containment and fusing arrangements for the battery locker in their rules for electrical installations. Periodic survey typically includes a capacity or load test, inspection of terminal corrosion, and verification that ventilation trunking is clear and that no unapproved equipment has been added to the locker.

Typical faults

FaultCauseConsequence
Sulphation of platesProlonged storage at low state of charge, or underchargingPermanent capacity loss, bank fails autonomy test
Electrolyte lossOvercharging boils off water on flooded cells, missed topping-upPlate exposure, accelerated corrosion, reduced life
Terminal corrosionAcid mist reacting with connectors, poor ventilationHigh resistance connections, voltage drop under load, fire risk
Thermal runaway on VRLACharger fault holding voltage too highCase swelling, venting, in extreme cases fire

What to look for in a supplier

  • Cell data sheets giving capacity at C10, C20 and C100 rates so autonomy calculations are not based on optimistic figures.
  • Certification matching the flag and class requirements for the vessel, not just a generic industrial rating.
  • Availability of matched replacement cells years after the initial supply, since mixing old and new cells in one string shortens the life of the new ones.
  • Clear guidance on charger compatibility, especially temperature compensation settings.

Never mix cells of different age or capacity in the same string; the weakest cell sets the usable capacity of the whole bank and ages the others prematurely through repeated deep discharge.

Models

Models in this type.

The best-documented model of each manufacturer first, then the next — 100 of 126 models in Lead-Acid Battery Bank. Every row links to full specifications, documents and service notes.

Page 1 of 2 · Next →
AlcadLB...P, LBE...P, MB...P and HB...P SEIMIAGM12225C7 EXIDE TECHNOLOGIES SASEP 900 Hoppecke MarineOGi 2-100 Marine GS Yuasa MarineREC 2-200 Marine SaftNALE Victron EnergyA200/AGM Spiralzellen AutronicaUEA-1 GAZ Geräte- und Akkumulatorenwerk ZwickauNi-Cd Batteries GAZ LOMAIN KGL...P, KGM...P HANSHIN ELECTRONICSHST-12S, HST-20S and HST-5D Hoppecke BatterienFNC: L - M - H - X GICOMSPTSYS Jiaxing Kexun ElectronKS series MRCLC-800S NEWMARIPS Integrated Power System SCM SISTEMAS, S.LAU-MAG AlcadLC..P, MC..P, HC..P and LCE..P SEIMIAGM12300C7 EXIDE TECHNOLOGIES SASEP1200 Hoppecke MarineOGi 2-200 Marine GS Yuasa MarineREC 2-500 Marine SaftNBLE Victron EnergyBAT412015081 AutronicaUEA-2 HANSHIN ELECTRONICSHSW-5xx, HSF-5xx, HSD-5xx AlcadPV 105 SEIMIAGM6V250A EXIDE TECHNOLOGIES SASEP1500 Hoppecke MarineOGi 2-500 Marine GS Yuasa MarineSLR 12-100 Marine SaftNICAMAX Victron EnergyBAT412025081 AutronicaUEA-313 AlcadPV 140 SEIMIBAT12105C7 EXIDE TECHNOLOGIES SASEP2100 Hoppecke MarineOPzS 2-100 Marine GS Yuasa MarineSLR 12-200 Marine SaftSBL, SBLE, SBM and SBH Victron EnergyBAT412038081 AutronicaUEA-1 AlcadPV 185 SEIMIBAT12105C7BV EXIDE TECHNOLOGIES SASEP450 Hoppecke MarineOPzS 2-1000 Marine GS Yuasa MarineSLR 2-1000 Marine SaftSNL, SNM, SNH and SNLE Victron EnergyBAT412060082 AutronicaUEA-2 AlcadPV 230 SEIMIBAT12140C7 EXIDE TECHNOLOGIES SASEP500 Hoppecke MarineOPzS 2-200 Marine GS Yuasa MarineSLR 2-2000 Marine SaftSNLE Victron EnergyBAT412110081 AutronicaUEA-313 AlcadPV 275 SEIMIBAT12180C7 EXIDE TECHNOLOGIES SASEP600 Hoppecke MarineOPzS 2-2000 Marine GS Yuasa MarineSLR 2-500 Marine SaftSPL + Victron EnergyBAT412112081 AlcadPV 320 SEIMIBAT12225C7 EXIDE TECHNOLOGIES SASEP800 Hoppecke MarineOPzS 2-500 Marine GS Yuasa MarineSNL 12-100 Marine SaftSUN + Victron EnergyBAT412117081 AlcadPV 370 SEIMIBAT1260C7 EXIDE TECHNOLOGIES SASER350 Hoppecke MarineOPzV 2-100 Marine GS Yuasa MarineSNL 12-200 Marine SaftUP1 L & UP1 M Victron EnergyBAT412123081 AlcadPV 45 SEIMIBAT1272C7 EXIDE TECHNOLOGIES SASER550 Hoppecke MarineOPzV 2-1000 Marine GS Yuasa MarineSNL 2-500 Marine AlcadPV 90 SEIMIBAT1292C7 EXIDE TECHNOLOGIES SASER650 Hoppecke MarineOPzV 2-200 Marine AlcadVTX1 L & VTX1 M SEIMIGEL1290C7 EXIDE TECHNOLOGIES SASER660 Hoppecke MarineOPzV 2-500 Marine AlcadVTX1 M 16 SEIMIS6370AGM EXIDE TECHNOLOGIES SASEZ850 AlcadVTX1 M 24 SEIMIS6460AGM EXIDE TECHNOLOGIESMARINE & LEISURE, EFB Batteries EZ600 and EZ850 AlcadVTX1 M 32 SEIMIAGM12110C7 EXIDE TECHNOLOGIES SASMARINE & LEISURE, Equipment GEL (ES) series
Related types

Also in Battery & UPS Systems.

The other equipment types in this category.

Battery Management System (BMS)Battery/UPSLithium-Ion Battery System (ESS)Marine Energy Storage SystemMarine UPSMarine UPS System

Inspection findings for this equipment

From public port state control and US Coast Guard records; OceanSphere assigns them to this equipment type from the descriptions.

USCG components

All inspection & safety data ›

More than the data sheet shows

Write to us about your machine — the answer comes by e-mail.

Name the make and the model and what the job is: a spare, a service call, a second opinion on a data sheet. We answer by e-mail.

No details at hand? A photo of the rating plate or the part is enough — simply attach it to the request.

Frequently asked

Questions that come up with this equipment.

Is Lead-Acid Battery Bank data free?

Yes. Every model page, every guide and every datasheet for this type is readable without an account. An account adds saved searches and requests, nothing is taken away.

My model is missing — what now?

Send us the nameplate. We identify it by hand, add it to the library, and if you need a part or a service, the request is already on our desk.

Can you source a Lead-Acid Battery Bank part?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.