What to check on a Chlorination System.
11 models from RWO/Veolia in Chlorination System. Below: the full model list.
What Sets Chlorination Apart
Chlorination protects water after it leaves the point of treatment, which is what separates it from UV sterilizers or reverse osmosis membranes that only act at a single point in the system. A residual dose of chlorine keeps working as water sits in tanks and travels through long, sometimes stagnant pipe runs where regrowth of Legionella and coliform bacteria is the real risk. Systems either generate sodium hypochlorite on board by electrolysis of a brine solution, or dose a stored hypochlorite solution from a day tank. Electrolytic generation avoids storing and handling concentrated chemical but depends on a working brine and power supply; dosing from stored solution is simpler but ties the ship to a chemical resupply chain.
Read the full guide
Main Components
Electrolytic Cell or Chemical Dosing Pump
The dosing pump is a positive-displacement or diaphragm pump metering hypochlorite solution in proportion to flow; the electrolytic cell produces hypochlorite in situ from a saturated brine feed and a DC power supply.
Brine Tank and Salt Saturator
Where fitted, a saturator dissolves solid salt to feed the electrolytic cell at a consistent concentration.
Residual Chlorine Analyzer
An in-line sensor that measures free or total residual chlorine and feeds back to the dosing controller to hold the setpoint automatically.
Contact Tank
A holding volume sized to give the dosed water enough contact time before it reaches the first outlet, so disinfection is complete rather than partial.
Day Tank and Injection Point
The storage vessel for ready-to-dose hypochlorite solution and the injection fitting into the potable water main, positioned upstream of the pressure set and storage tanks.
Selection and Sizing
- Daily potable water production or bunkered volume, which sets the required dosing pump capacity.
- Target residual, generally kept in a narrow band that is enough to suppress regrowth without giving the water a strong taste.
- Contact time available before the first draw-off point, which limits how low the dose can be set.
- Whether the ship already carries a brine or salt supply chain, which favors electrolytic generation over stored chemical.
Regulations and Class
Potable water quality on board is addressed through flag state and port state health regulations rather than a single IMO instrument, and many operators apply WHO drinking water guideline values as the practical benchmark for residual chlorine and microbiological limits. Class societies typically require the potable water system, including the dosing arrangement, to be part of the vessel's health and hygiene documentation reviewed at survey, and passenger vessels usually carry stricter internal monitoring frequencies driven by public health inspection regimes.
Typical Faults
| Fault | Cause | Consequence |
|---|---|---|
| Residual drops to zero | Empty day tank, failed dosing pump, or fouled electrolytic cell | Loss of protection, risk of bacterial regrowth in storage tanks |
| Chlorine taste complaints | Dosing controller set too high or analyzer drifted out of calibration | Crew reduces or bypasses dosing informally, defeating the system |
| Scale buildup on electrolytic cell plates | Hard brine feed or infrequent acid cleaning cycle | Falling hypochlorite output despite normal power draw |
| Analyzer fouling | Biofilm or scale on the sensor electrode | False high or low readings, dosing controller chases the wrong setpoint |
What to Look for in a Supplier
- A dosing controller with logged residual chlorine trend data, since spot checks alone will not catch an intermittent failure.
- Clear guidance on cell cleaning intervals if electrolytic generation is chosen, matched to the ship's actual brine quality.
- Materials in contact with hypochlorite rated for the chemical, not a generic plastic that degrades under chlorine exposure.
- Compatibility of the injection point and contact tank with the existing potable water layout, avoiding a redesign of the whole system.
Never judge a chlorination system by the dosing pump running; judge it by the residual reading at the farthest tap on the ship, that is where a failing system shows up first.