Portable Tank Cleaning Gun
A portable tank cleaning gun reaches the corners a fixed rotary tank cleaning machine misses, connected by hose to the ship's washing water or chemical supply and worked by hand inside the tank rather than lowered through a deck hatch.
What to check on a Portable Tank Cleaning Gun.
20 models from Alfa Laval/Butterworth in Portable Tank Cleaning Gun. Below: the full model list.
What sets a portable gun apart
A portable tank cleaning gun is a hand-carried, hose-fed nozzle used inside a cargo or ballast tank for spot cleaning, in contrast to a fixed rotary tank cleaning machine that is lowered through a deck hatch and left to run unattended on a programmed cycle. It earns its place where a fixed machine cannot reach — stiffeners, corners, pump wells — or where the ship has no fixed system fitted at all, typically smaller tankers, chemical carriers and tank barges.
Main components
- Gun body with a hand trigger or lever valve controlling flow to the nozzle.
- Rotating nozzle head, single or multi-jet, driven by the reaction force of the water itself so it needs no separate motor.
- Hose connection, usually a camlock or similar quick-connect fitting to the ship's washing hose.
- Lance or extension pipe to reach into corners and along stiffeners without the operator having to climb into every recess.
- On some models, a small in-line chemical injection point for detergent dosing.
Selection and sizing
Flow rate and working pressure have to match what the ship's tank cleaning pump and heater can actually deliver — a gun rated well above the supply pressure will simply underperform. Material matters more than on most deck equipment: stainless steel construction avoids introducing contamination into a cargo tank, particularly on chemical carriers where cargo compatibility is checked closely. Lance length is chosen against the tank's internal structure, and jet pattern, fan versus concentrated jet, against whether the job is bulk residue removal or spot cleaning of a stubborn deposit.
Typical faults
| Fault | Cause | Consequence |
|---|---|---|
| Nozzle wear | Abrasive residue passing through the jets over repeated use | Reduced jet pressure and uneven wash coverage, longer cleaning times |
| Trigger or valve seal failure | Ageing seals or exposure to aggressive cleaning chemicals | Leakage past the trigger, operator exposure to wash medium |
| Hose connection corrosion | Wrong material for the cargo or cleaning chemical in use | Pressure loss, and in a worst case a blowout under pressure inside the tank |
| Rotating head seizure | Bearing wear or debris ingress | Gun stops rotating, leaving a visible unwashed streak in the pattern |
What to look for in a supplier
- Material and seal compatibility with the range of cargoes the ship actually carries, not a generic freshwater rating.
- A pressure rating that matches, rather than exceeds, the ship's cleaning pump discharge.
- Spare nozzles and seals sized for the specific model, since these are consumable parts.
A gun with a seized head still sprays water, so the fault is easy to miss from outside the tank until the wash pattern shows an unwashed streak — check rotation before sending anyone in to finish the job by hand.
Models in this type.
The best-documented model of each manufacturer first, then the next — 20 of 20 models in Portable Tank Cleaning Gun. Every row links to full specifications, documents and service notes.
Manufacturers.
All 3 manufacturers with models of Portable Tank Cleaning Gun. Names with a manufacturer page open it; the others open a search across the full library.
All manufacturersAlso in Tank Cleaning Equipment.
The other equipment types in this category.
One request. A person reads it and replies by e-mail.
Tell us the manufacturer, the model and what you need — a part, a service call, a second opinion. A person reads every request and replies by e-mail.
No details at hand? A photo of the rating plate or the part is enough — simply attach it to the request.
Three things people ask first.
Is Portable Tank Cleaning Gun data free?
Yes. Every model page, every guide and every datasheet for this type is readable without an account. An account adds saved searches and requests, nothing is taken away.
My model is missing — what now?
Send us the nameplate. We identify it by hand, add it to the library, and if you need a part or a service, the request is already on our desk.
Can you source a Portable Tank Cleaning Gun part?
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.