Skip to content
OceanSphereENGINES
Library› Deck› Cargo Lashing & Container Equipment› General Lashing Equipment
Cargo Lashing & Container Equipment

General Lashing Equipment

General lashing equipment covers the turnbuckles, chain lashings, wire lashings and D-rings used outside the standard twistlock-and-rod container system, items chosen for tonnage rating and corrosion resistance, not for how they look on deck.

Alfa Laval
Knowledge

What to check on a General Lashing Equipment.

1 models from Alfa Laval in General Lashing Equipment. Below: the full model list.

What this category covers

General lashing equipment is the group of securing items used to lash cargo that is not a standardised container stack: breakbulk, project cargo, vehicles, and non-standard container arrangements that fall outside the twistlock-and-lashing-rod system built into a cellular container ship's fittings. It includes turnbuckles, chain lashings, wire rope lashings, D-rings and pad eyes welded or bolted to deck, and general securing hardware such as shackles and chain binders. The common thread is that each item has a rated safe working load that must be matched to the actual securing calculation for the cargo, not selected by eye or by what happens to be in the lashing locker.

General lashing equipment arrangement
Side view of a container corner secured to the deck by a lashing rod and turnbuckle to a D-ring on one side, and by a chain lashing to a D-ring on the other side.

Legend

  1. container
  2. corner casting
  3. lashing rod
  4. chain lashing
  5. turnbuckle
  6. D-ring (deck fitting)
  7. deck

Main components of the group

  • Turnbuckles (rigging screws) — tensioning devices between a lashing point and the cargo, rated by safe working load and thread size, used to take up slack and apply pre-tension to a lashing
  • Chain lashings and binders — used for heavy or irregular cargo where a wire or rod lashing cannot follow the shape of the load; load binders tension the chain
  • Wire rope lashings — flexible lashing for cargo shapes that chain or rod cannot easily secure, with their own discard criteria as they age
  • D-rings and pad eyes — fixed deck or structure attachment points that the lashing gear connects to; their rating and the weld or bolting into structure both matter
  • Shackles and connecting hardware — joins lashing components together, always the weakest link if undersized relative to the rest of the lashing chain

Selection criteria

Selection is driven by the cargo securing manual for the specific voyage or cargo, not by a general rule of thumb. Relevant points are:

  • Safe working load of every component in the lashing chain, since the whole arrangement is only as strong as its weakest single item
  • Corrosion resistance appropriate to exposure — deck cargo lashings live outdoors in salt spray for the length of the voyage
  • Compatibility with the fixed deck fittings actually installed on the ship, since pad eye spacing and rating vary by vessel
  • Ease of tensioning and release, particularly for cargo requiring frequent lashing changes at multiple ports

Regulations and class

The IMO Cargo Securing Manual, required on board under SOLAS Chapter VI/VII, sets out the approved lashing arrangements, equipment and safe working loads for the ship's actual cargo and lashing points, and lashing equipment used must match what the manual specifies rather than be substituted informally. Class and flag surveys check the condition of fixed lashing points and confirm that portable lashing gear on board is what the approved manual calls for, in adequate quantity and condition.

Read the full guide

Typical faults

FaultCauseConsequence
Turnbuckle thread seizureCorrosion from prolonged salt water exposure without lubricationCannot be tensioned or released, forcing damage or cutting to free the cargo
Mismatched safe working loads within one lashing chainSubstituting available gear rather than the manual-specified componentsThe lashing arrangement is only as strong as its weakest component, defeating the securing calculation
Pad eye or D-ring fatigue crackingRepeated dynamic loading at sea over years without inspectionSudden failure of the attachment point under load, cargo shift
Wire rope lashing degradationCorrosion or fatigue from repeated tensioning cyclesReduced breaking strength below the rating relied on in the securing calculation

What to look for in a supplier

  • Safe working load certification traceable to a recognised testing standard for each item
  • Material and coating suited to the trading area and exposure, particularly for long-term deck cargo lashings
  • Stock consistency so that a full lashing set can be replaced with matching-rated components, not a mix of load ratings
  • Familiarity with the vessel type's cargo securing manual requirements, for correct fitting recommendations

A lashing arrangement is only as strong as its weakest single component — a high-rated chain finished off with an undersized shackle because it was the one within reach in the locker gives a false sense of security, not a stronger lashing.

By manufacturer

Manufacturers.

All 58 manufacturers with models of General Lashing Equipment. Names with a manufacturer page open it; the others open a search across the full library.

All manufacturers in the library
Show all 58 manufacturers
Related types

Also in Cargo Lashing & Container Equipment.

The other equipment types in this category.

Cargo Hooks & ShacklesContainer Lashing SystemsISO Tank Container (Portable Tank)Offshore ContainersPortable Offshore UnitROV & Subsea Equipment
More than the data sheet shows

Write to us about your machine — the answer comes by e-mail.

Name the make and the model and what the job is: a spare, a service call, a second opinion on a data sheet. We answer by e-mail.

No details at hand? A photo of the rating plate or the part is enough — simply attach it to the request.

Frequently asked

Questions that come up with this equipment.

Is General Lashing Equipment data free?

Yes. Every model page, every guide and every datasheet for this type is readable without an account. An account adds saved searches and requests, nothing is taken away.

My model is missing — what now?

Send us the nameplate. We identify it by hand, add it to the library, and if you need a part or a service, the request is already on our desk.

Can you source a General Lashing Equipment part?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.