Commercial Oven / Combi Steamer
medium
145 / 145 models (Inspector)
A combi steamer switches between dry convection heat, saturated steam and a combined mode within one cabinet, letting the galley bake, steam and roast on one unit instead of running separate ovens and steamers, at the cost of the water and drain connection a plain convection oven doesn't need.
Read more — Commercial Oven / Combi Steamer explained ▾
What defines this type
A commercial oven or combi steamer heats an enclosed cooking cabinet by forced convection, injected steam, or both together, distinguishing it from a simple domestic-style oven by having a controlled steam generator and a programmable multi-stage cook cycle. The combi mode, alternating or blending hot air with steam, is what lets one unit replace a separate steamer, a proving cabinet and a convection oven in galleys where space does not allow all three. A plain convection oven has none of the steam generation or drain plumbing and is a simpler, cheaper choice where steaming is not needed.
Main components
Heating system
Electric resistance elements or, on larger vessels, thermal-oil or steam-heated coils circulate hot air via a fan behind a baffle plate. Marine units are almost always electric given the galley's isolated services and the difficulty of running a gas line safely through accommodation spaces.
Steam generator
A separate boiler chamber or, on boiler-less designs, direct water injection onto a heated surface produces steam on demand. Boiler-type units hold better steam quality at low temperatures but need periodic descaling; boiler-less units are lighter and faster to respond but more sensitive to feed water quality.
Fan and reversing drive
Multi-speed fan with a reversing drive to even out heat distribution across multiple racks, critical on a rolling ship where natural convection alone would bake unevenly.
Controls and probe
Programmable controller with a core temperature probe for meat, letting the cycle end on product temperature rather than time alone, plus a self-clean cycle using the same steam and heat elements.
Selection and sizing
- Number of GN (gastronorm) pan positions against crew or passenger headcount and meal service pattern
- Water quality and whether a softener or reverse-osmosis pretreatment is needed to protect the steam generator from scale, particularly on vessels making their own fresh water
- Electrical supply available, since larger combi units draw significant three-phase load and compete with other galley equipment on the same feeder
- Drain connection and grease trap routing, since steam condensate and cleaning water both need a proper drain, not just a floor gully
- Gimbal or fixed mounting and rack retention suitable for the vessel's expected motion
Regulations and class
Galley equipment falls under the same fire safety requirements as the rest of the galley under SOLAS Chapter II-2, including clearance from combustibles and, where fitted, connection to the galley's fixed fire-extinguishing arrangements. The Maritime Labour Convention 2006 sets general requirements for galley equipment being suitable, safe and properly maintained for crew catering. Electrical installation of the unit is covered under the same class rules for electrical machinery as any other high-current galley appliance, including isolation and earthing requirements.
Typical faults
| Fault | Cause | Consequence |
|---|---|---|
| Uneven cooking across racks | Fan bearing wear or baffle plate damage disrupting airflow pattern | Complaints of undercooked product on one side, overcooked on the other |
| Steam generator scaling | Feed water not softened or RO-treated as specified | Reduced steam output, eventual element or boiler chamber failure |
| Door seal leakage | Gasket age or door misalignment from heavy daily use | Steam loss, longer cook times, moisture damage to nearby cabinetry |
| Core probe reading error | Probe tip fouled or connector corroded | Cycle ends on wrong product temperature, a food safety risk |
What to look for in a supplier
- Boiler versus boiler-less steam generation matched to the vessel's water treatment capability
- Gimbal mount or rack-retention hardware rated for the vessel's actual sea state exposure
- Self-clean cycle chemistry compatible with the galley's greywater and drain arrangements
- Service network reachable on the vessel's actual trading routes, not just the home port
Scale damage to the steam generator is almost always a feed-water problem, not a unit defect, so check the water treatment log before accepting a warranty claim on a repeat boiler failure.
9 manufacturers · 145 models
RATIONAL Marine
28
iCombi Pro 6-1/1 electric
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element, burner, thermostat, or temperature-control failure causes slow heating, overheating, or inability to reach the selected condition
- Pump, fan, motor, or drive faults cause poor circulation, washing, extraction, or cooling depending on the appliance
- Scale, grease, food debris, or blocked filters and drains reduce performance and can cause leakage, odors, or trips
- Door seal, hose, valve, or connection deterioration causes water, steam, gas, or condensate leakage
- Electrical supply, switch, sensor, or control-board faults cause intermittent operation, failed cycles, or protective trips
Service: Inspect cleanliness, guards, doors and seals, electrical supply and earthing, hoses, drains, filters, thermostats, safety cut-outs, ventilation, and leakage. Clean and descale as appropriate and follow the manufacturer documentation for exact electrical, gas, and temperature settings.
Spare Parts: Typical spares include door and connection seals, filters, heating or ignition components, switches, thermostats, fuses, pump or fan service items, and critical control parts recommended for the appliance.
Use Cases: Used on merchant, passenger, offshore, ferry, naval, and accommodation vessels to support crew and passenger hotel services.
iCombi Pro 6-1/1 gas
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Scale, grease or food residue restricts water, air or heat transfer and causes poor performance
- Door seals, valves or hose connections can leak, noticed as water, air or temperature loss
- Heating, refrigeration or motor components can fail, noticed as inability to reach operating condition
- Temperature, level or door sensors can drift or fail and cause alarms or interrupted cycles
- Corroded electrical connections or moisture ingress can cause intermittent operation or protective trips
Service: Keep food-contact and ventilation surfaces clean, inspect seals, filters, drains and electrical condition and verify safe operation of doors and guards. Function-test heating, cooling, wash or extraction modes applicable to the appliance. Exact temperatures, cleaning chemicals and electrical test values must follow the appliance manufacturer documentation and onboard hygiene procedures.
Spare Parts: Typical spares include door gaskets, filters, spray or drain parts, lamps or indicators, thermostats or sensors, heating elements or contactors and service seals appropriate to the appliance.
Use Cases: Used in merchant, passenger, offshore and service vessels for onboard catering, food storage and galley operations.
iCombi Pro 10-1/1 electric
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element, burner, thermostat, or temperature-control failure causes slow heating, overheating, or inability to reach the selected condition
- Pump, fan, motor, or drive faults cause poor circulation, washing, extraction, or cooling depending on the appliance
- Scale, grease, food debris, or blocked filters and drains reduce performance and can cause leakage, odors, or trips
- Door seal, hose, valve, or connection deterioration causes water, steam, gas, or condensate leakage
- Electrical supply, switch, sensor, or control-board faults cause intermittent operation, failed cycles, or protective trips
Service: Inspect cleanliness, guards, doors and seals, electrical supply and earthing, hoses, drains, filters, thermostats, safety cut-outs, ventilation, and leakage. Clean and descale as appropriate and follow the manufacturer documentation for exact electrical, gas, and temperature settings.
Spare Parts: Typical spares include door and connection seals, filters, heating or ignition components, switches, thermostats, fuses, pump or fan service items, and critical control parts recommended for the appliance.
Use Cases: Used on merchant, passenger, offshore, ferry, naval, and accommodation vessels to support crew and passenger hotel services.
iCombi Pro 10-1/1 gas
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating, cooling or drive-component failure causes poor performance, slow cycles or inability to operate
- Temperature sensor, thermostat or control faults cause unstable operation or protective shutdown
- Door seal, hose, drain or valve deterioration causes leakage, heat loss or water accumulation
- Fan, pump, motor or bearing wear causes abnormal noise, reduced circulation or vibration
- Electrical, ignition or safety-interlock faults cause failed starts, nuisance trips or error indications
Service: Inspect seals, controls, heaters or refrigeration components, pumps or fans, water and drain connections, ventilation and secure mounting according to the appliance type. Clean grease, lint, scale or food residues from approved areas. Verify safety interlocks and look for heat-damaged wiring. Refer to the manufacturer documentation for the exact figure for temperature, loading and service criteria.
Spare Parts: Carry seals, sensors, fuses, control relays, pump or fan parts, heating or ignition components and appliance-specific consumables.
Use Cases: Galley, pantry, accommodation and laundry service on merchant, passenger and offshore vessels.
iCombi Pro 10-2/1 electric
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element, burner, thermostat, or temperature-control failure causes slow heating, overheating, or inability to reach the selected condition
- Pump, fan, motor, or drive faults cause poor circulation, washing, extraction, or cooling depending on the appliance
- Scale, grease, food debris, or blocked filters and drains reduce performance and can cause leakage, odors, or trips
- Door seal, hose, valve, or connection deterioration causes water, steam, gas, or condensate leakage
- Electrical supply, switch, sensor, or control-board faults cause intermittent operation, failed cycles, or protective trips
Service: Inspect cleanliness, guards, doors and seals, electrical supply and earthing, hoses, drains, filters, thermostats, safety cut-outs, ventilation, and leakage. Clean and descale as appropriate and follow the manufacturer documentation for exact electrical, gas, and temperature settings.
Spare Parts: Typical spares include door and connection seals, filters, heating or ignition components, switches, thermostats, fuses, pump or fan service items, and critical control parts recommended for the appliance.
Use Cases: Used on merchant, passenger, offshore, ferry, naval, and accommodation vessels to support crew and passenger hotel services.
iCombi Pro 10-2/1 gas
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating, cooling or drive-component failure causes poor performance, slow cycles or inability to operate
- Temperature sensor, thermostat or control faults cause unstable operation or protective shutdown
- Door seal, hose, drain or valve deterioration causes leakage, heat loss or water accumulation
- Fan, pump, motor or bearing wear causes abnormal noise, reduced circulation or vibration
- Electrical, ignition or safety-interlock faults cause failed starts, nuisance trips or error indications
Service: Inspect seals, controls, heaters or refrigeration components, pumps or fans, water and drain connections, ventilation and secure mounting according to the appliance type. Clean grease, lint, scale or food residues from approved areas. Verify safety interlocks and look for heat-damaged wiring. Refer to the manufacturer documentation for the exact figure for temperature, loading and service criteria.
Spare Parts: Carry seals, sensors, fuses, control relays, pump or fan parts, heating or ignition components and appliance-specific consumables.
Use Cases: Galley, pantry, accommodation and laundry service on merchant, passenger and offshore vessels.
iCombi Pro 20-1/1 electric
unverified
· 15.0 kW
Power (kW)
15
Voltage (V)
400
Capacity
20 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element, burner, thermostat, or temperature-control failure causes slow heating, overheating, or inability to reach the selected condition
- Pump, fan, motor, or drive faults cause poor circulation, washing, extraction, or cooling depending on the appliance
- Scale, grease, food debris, or blocked filters and drains reduce performance and can cause leakage, odors, or trips
- Door seal, hose, valve, or connection deterioration causes water, steam, gas, or condensate leakage
- Electrical supply, switch, sensor, or control-board faults cause intermittent operation, failed cycles, or protective trips
Service: Inspect cleanliness, guards, doors and seals, electrical supply and earthing, hoses, drains, filters, thermostats, safety cut-outs, ventilation, and leakage. Clean and descale as appropriate and follow the manufacturer documentation for exact electrical, gas, and temperature settings.
Spare Parts: Typical spares include door and connection seals, filters, heating or ignition components, switches, thermostats, fuses, pump or fan service items, and critical control parts recommended for the appliance.
Use Cases: Used on merchant, passenger, offshore, ferry, naval, and accommodation vessels to support crew and passenger hotel services.
iCombi Pro 20-1/1 gas
unverified
· 15.0 kW
Power (kW)
15
Voltage (V)
400
Capacity
20 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating, cooling or drive-component failure causes poor performance, slow cycles or inability to operate
- Temperature sensor, thermostat or control faults cause unstable operation or protective shutdown
- Door seal, hose, drain or valve deterioration causes leakage, heat loss or water accumulation
- Fan, pump, motor or bearing wear causes abnormal noise, reduced circulation or vibration
- Electrical, ignition or safety-interlock faults cause failed starts, nuisance trips or error indications
Service: Inspect seals, controls, heaters or refrigeration components, pumps or fans, water and drain connections, ventilation and secure mounting according to the appliance type. Clean grease, lint, scale or food residues from approved areas. Verify safety interlocks and look for heat-damaged wiring. Refer to the manufacturer documentation for the exact figure for temperature, loading and service criteria.
Spare Parts: Carry seals, sensors, fuses, control relays, pump or fan parts, heating or ignition components and appliance-specific consumables.
Use Cases: Galley, pantry, accommodation and laundry service on merchant, passenger and offshore vessels.
iCombi Pro 20-2/1 electric
unverified
· 15.0 kW
Power (kW)
15
Voltage (V)
400
Capacity
20 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element, burner, thermostat, or temperature-control failure causes slow heating, overheating, or inability to reach the selected condition
- Pump, fan, motor, or drive faults cause poor circulation, washing, extraction, or cooling depending on the appliance
- Scale, grease, food debris, or blocked filters and drains reduce performance and can cause leakage, odors, or trips
- Door seal, hose, valve, or connection deterioration causes water, steam, gas, or condensate leakage
- Electrical supply, switch, sensor, or control-board faults cause intermittent operation, failed cycles, or protective trips
Service: Inspect cleanliness, guards, doors and seals, electrical supply and earthing, hoses, drains, filters, thermostats, safety cut-outs, ventilation, and leakage. Clean and descale as appropriate and follow the manufacturer documentation for exact electrical, gas, and temperature settings.
Spare Parts: Typical spares include door and connection seals, filters, heating or ignition components, switches, thermostats, fuses, pump or fan service items, and critical control parts recommended for the appliance.
Use Cases: Used on merchant, passenger, offshore, ferry, naval, and accommodation vessels to support crew and passenger hotel services.
iCombi Pro 20-2/1 gas
unverified
· 15.0 kW
Power (kW)
15
Voltage (V)
400
Capacity
20 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating, cooling or drive-component failure causes poor performance, slow cycles or inability to operate
- Temperature sensor, thermostat or control faults cause unstable operation or protective shutdown
- Door seal, hose, drain or valve deterioration causes leakage, heat loss or water accumulation
- Fan, pump, motor or bearing wear causes abnormal noise, reduced circulation or vibration
- Electrical, ignition or safety-interlock faults cause failed starts, nuisance trips or error indications
Service: Inspect seals, controls, heaters or refrigeration components, pumps or fans, water and drain connections, ventilation and secure mounting according to the appliance type. Clean grease, lint, scale or food residues from approved areas. Verify safety interlocks and look for heat-damaged wiring. Refer to the manufacturer documentation for the exact figure for temperature, loading and service criteria.
Spare Parts: Carry seals, sensors, fuses, control relays, pump or fan parts, heating or ignition components and appliance-specific consumables.
Use Cases: Galley, pantry, accommodation and laundry service on merchant, passenger and offshore vessels.
iVario 2-S electric
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Scale, grease or food residue restricts water, air or heat transfer and causes poor performance
- Door seals, valves or hose connections can leak, noticed as water, air or temperature loss
- Heating, refrigeration or motor components can fail, noticed as inability to reach operating condition
- Temperature, level or door sensors can drift or fail and cause alarms or interrupted cycles
- Corroded electrical connections or moisture ingress can cause intermittent operation or protective trips
Service: Keep food-contact and ventilation surfaces clean, inspect seals, filters, drains and electrical condition and verify safe operation of doors and guards. Function-test heating, cooling, wash or extraction modes applicable to the appliance. Exact temperatures, cleaning chemicals and electrical test values must follow the appliance manufacturer documentation and onboard hygiene procedures.
Spare Parts: Typical spares include door gaskets, filters, spray or drain parts, lamps or indicators, thermostats or sensors, heating elements or contactors and service seals appropriate to the appliance.
Use Cases: Used in merchant, passenger, offshore and service vessels for onboard catering, food storage and galley operations.
iVario 2-S gas
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating-element, burner, thermostat, or temperature-control failure causes slow heating, overheating, or inability to reach the selected condition
- Pump, fan, motor, or drive faults cause poor circulation, washing, extraction, or cooling depending on the appliance
- Scale, grease, food debris, or blocked filters and drains reduce performance and can cause leakage, odors, or trips
- Door seal, hose, valve, or connection deterioration causes water, steam, gas, or condensate leakage
- Electrical supply, switch, sensor, or control-board faults cause intermittent operation, failed cycles, or protective trips
Service: Inspect cleanliness, guards, doors and seals, electrical supply and earthing, hoses, drains, filters, thermostats, safety cut-outs, ventilation, and leakage. Clean and descale as appropriate and follow the manufacturer documentation for exact electrical, gas, and temperature settings.
Spare Parts: Typical spares include door and connection seals, filters, heating or ignition components, switches, thermostats, fuses, pump or fan service items, and critical control parts recommended for the appliance.
Use Cases: Used on merchant, passenger, offshore, ferry, naval, and accommodation vessels to support crew and passenger hotel services.
iVario 2-L electric
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Scale, grease or food residue restricts water, air or heat transfer and causes poor performance
- Door seals, valves or hose connections can leak, noticed as water, air or temperature loss
- Heating, refrigeration or motor components can fail, noticed as inability to reach operating condition
- Temperature, level or door sensors can drift or fail and cause alarms or interrupted cycles
- Corroded electrical connections or moisture ingress can cause intermittent operation or protective trips
Service: Keep food-contact and ventilation surfaces clean, inspect seals, filters, drains and electrical condition and verify safe operation of doors and guards. Function-test heating, cooling, wash or extraction modes applicable to the appliance. Exact temperatures, cleaning chemicals and electrical test values must follow the appliance manufacturer documentation and onboard hygiene procedures.
Spare Parts: Typical spares include door gaskets, filters, spray or drain parts, lamps or indicators, thermostats or sensors, heating elements or contactors and service seals appropriate to the appliance.
Use Cases: Used in merchant, passenger, offshore and service vessels for onboard catering, food storage and galley operations.
iVario 2-L gas
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating-element, burner, thermostat, or temperature-control failure causes slow heating, overheating, or inability to reach the selected condition
- Pump, fan, motor, or drive faults cause poor circulation, washing, extraction, or cooling depending on the appliance
- Scale, grease, food debris, or blocked filters and drains reduce performance and can cause leakage, odors, or trips
- Door seal, hose, valve, or connection deterioration causes water, steam, gas, or condensate leakage
- Electrical supply, switch, sensor, or control-board faults cause intermittent operation, failed cycles, or protective trips
Service: Inspect cleanliness, guards, doors and seals, electrical supply and earthing, hoses, drains, filters, thermostats, safety cut-outs, ventilation, and leakage. Clean and descale as appropriate and follow the manufacturer documentation for exact electrical, gas, and temperature settings.
Spare Parts: Typical spares include door and connection seals, filters, heating or ignition components, switches, thermostats, fuses, pump or fan service items, and critical control parts recommended for the appliance.
Use Cases: Used on merchant, passenger, offshore, ferry, naval, and accommodation vessels to support crew and passenger hotel services.
iVario Pro 2-XL electric
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element, burner, thermostat, or temperature-control failure causes slow heating, overheating, or inability to reach the selected condition
- Pump, fan, motor, or drive faults cause poor circulation, washing, extraction, or cooling depending on the appliance
- Scale, grease, food debris, or blocked filters and drains reduce performance and can cause leakage, odors, or trips
- Door seal, hose, valve, or connection deterioration causes water, steam, gas, or condensate leakage
- Electrical supply, switch, sensor, or control-board faults cause intermittent operation, failed cycles, or protective trips
Service: Inspect cleanliness, guards, doors and seals, electrical supply and earthing, hoses, drains, filters, thermostats, safety cut-outs, ventilation, and leakage. Clean and descale as appropriate and follow the manufacturer documentation for exact electrical, gas, and temperature settings.
Spare Parts: Typical spares include door and connection seals, filters, heating or ignition components, switches, thermostats, fuses, pump or fan service items, and critical control parts recommended for the appliance.
Use Cases: Used on merchant, passenger, offshore, ferry, naval, and accommodation vessels to support crew and passenger hotel services.
iVario Pro 2-XL gas
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Scale, grease or food residue restricts water, air or heat transfer and causes poor performance
- Door seals, valves or hose connections can leak, noticed as water, air or temperature loss
- Heating, refrigeration or motor components can fail, noticed as inability to reach operating condition
- Temperature, level or door sensors can drift or fail and cause alarms or interrupted cycles
- Corroded electrical connections or moisture ingress can cause intermittent operation or protective trips
Service: Keep food-contact and ventilation surfaces clean, inspect seals, filters, drains and electrical condition and verify safe operation of doors and guards. Function-test heating, cooling, wash or extraction modes applicable to the appliance. Exact temperatures, cleaning chemicals and electrical test values must follow the appliance manufacturer documentation and onboard hygiene procedures.
Spare Parts: Typical spares include door gaskets, filters, spray or drain parts, lamps or indicators, thermostats or sensors, heating elements or contactors and service seals appropriate to the appliance.
Use Cases: Used in merchant, passenger, offshore and service vessels for onboard catering, food storage and galley operations.
Commercial Oven / Combi Steamer Small 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Small 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Small 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Metos Marine
24
Viking 6GN electric
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element or burner failure caused by component wear or control faults, resulting in slow heating or inability to reach the selected condition
- Temperature-sensor or thermostat malfunction caused by drift or electrical failure, resulting in unstable or incorrect temperature
- Door, lid or seal deterioration caused by repeated use, resulting in heat loss, steam leakage or poor cooking performance
- Electrical-control faults caused by moisture, loose terminals or failed relays, resulting in intermittent operation or breaker trips
- Drain, steam or ventilation restriction where applicable caused by grease or food deposits, resulting in poor operation, leakage or overheating
Service: Keep heating surfaces, drains, ventilation paths and accessible seals clean. Inspect electrical terminals, controls, door mechanisms and safety interlocks for heat damage or looseness. Verify temperature control with the vessel's approved maintenance method and investigate repeated overheating or breaker trips. Check secure fastening to the galley structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and heating components. Refer to the manufacturer documentation for exact electrical ratings, calibration procedures and service limits.
Spare Parts: Keep door or lid seals, thermostats or temperature sensors, selected heating elements, fuses, lamps, switches and manufacturer-recommended control parts appropriate to the model. High-use passenger vessels may justify additional wear components. Verify all electrical parts against the appliance nameplate.
Use Cases: Food preparation and catering service in merchant-ship, ferry, cruise-ship and offshore galley installations.
Viking 6GN gas
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating or wash-process failure caused by heater, burner, pump or control faults, noticed as poor temperature rise or incomplete cycles
- Water/steam/drain fault caused by scale, blocked filters, valves or pumps, noticed as alarms, leakage or standing water
- Door seal or interlock failure caused by wear, noticed as leakage or inability to start safely
- Fan/spray/dosing failure caused by motor, nozzle or chemical-feed faults, noticed as uneven cooking or poor cleaning results
- Temperature sensor or controller failure caused by probe/electronics faults, noticed as unstable operation or error codes
Service: Inspect heating source, water system, drains, filters, pumps/fans, door seals and interlocks, dosing or steam systems where fitted, and secure marine mounting. Verify ventilation and safe electrical/gas isolation. Descale and clean only using manufacturer-approved methods.
Spare Parts: Carry door seals, fuses, temperature sensors, water filters, pump/fan service parts, spray/dosing components and manufacturer-approved burner/ignition parts for gas versions. Maintain specified cleaning and treatment consumables.
Use Cases: Used in merchant and passenger-ship galleys for high-volume cooking, steaming or washing of crockery and utensils.
Viking 10GN electric
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element, burner or temperature-control failure causes slow warm-up, uneven cooking or inability to reach the selected temperature
- Steam-generation or water-supply faults cause poor humidification, scaling or steam-related alarms
- Door-seal wear causes heat or steam leakage and reduced cooking efficiency
- Fan or circulation-motor failure causes uneven temperature distribution and abnormal noise
- Control-board, sensor or safety-interlock faults cause error messages, failed starts or unexpected shutdown
Service: Inspect door seals, hinges, heating system, fans, sensors, water and drain connections and ventilation clearances. Remove scale and grease from approved areas and verify safety interlocks. Check electrical terminals for heat damage and confirm secure marine fastening. Refer to manufacturer documentation for exact cleaning chemicals, temperatures and electrical data.
Spare Parts: Carry door seals, temperature sensors, heating or ignition components as applicable, fan or motor service parts, water-valve parts, fuses and control relays.
Use Cases: Merchant, passenger, offshore and naval galleys requiring commercial food preparation.
Viking 10GN gas
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating-element, burner, thermostat, or temperature-control failure causes slow heating, overheating, or inability to reach the selected condition
- Pump, fan, motor, or drive faults cause poor circulation, washing, extraction, or cooling depending on the appliance
- Scale, grease, food debris, or blocked filters and drains reduce performance and can cause leakage, odors, or trips
- Door seal, hose, valve, or connection deterioration causes water, steam, gas, or condensate leakage
- Electrical supply, switch, sensor, or control-board faults cause intermittent operation, failed cycles, or protective trips
Service: Inspect cleanliness, guards, doors and seals, electrical supply and earthing, hoses, drains, filters, thermostats, safety cut-outs, ventilation, and leakage. Clean and descale as appropriate and follow the manufacturer documentation for exact electrical, gas, and temperature settings.
Spare Parts: Typical spares include door and connection seals, filters, heating or ignition components, switches, thermostats, fuses, pump or fan service items, and critical control parts recommended for the appliance.
Use Cases: Used on merchant, passenger, offshore, ferry, naval, and accommodation vessels to support crew and passenger hotel services.
Viking 20GN electric
unverified
· 15.0 kW
Power (kW)
15
Voltage (V)
400
Capacity
20 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element, burner or temperature-control failure causes slow warm-up, uneven cooking or inability to reach the selected temperature
- Steam-generation or water-supply faults cause poor humidification, scaling or steam-related alarms
- Door-seal wear causes heat or steam leakage and reduced cooking efficiency
- Fan or circulation-motor failure causes uneven temperature distribution and abnormal noise
- Control-board, sensor or safety-interlock faults cause error messages, failed starts or unexpected shutdown
Service: Inspect door seals, hinges, heating system, fans, sensors, water and drain connections and ventilation clearances. Remove scale and grease from approved areas and verify safety interlocks. Check electrical terminals for heat damage and confirm secure marine fastening. Refer to manufacturer documentation for exact cleaning chemicals, temperatures and electrical data.
Spare Parts: Carry door seals, temperature sensors, heating or ignition components as applicable, fan or motor service parts, water-valve parts, fuses and control relays.
Use Cases: Merchant, passenger, offshore and naval galleys requiring commercial food preparation.
Viking 20GN gas
unverified
· 15.0 kW
Power (kW)
15
Voltage (V)
400
Capacity
20 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating-element, burner, thermostat, or temperature-control failure causes slow heating, overheating, or inability to reach the selected condition
- Pump, fan, motor, or drive faults cause poor circulation, washing, extraction, or cooling depending on the appliance
- Scale, grease, food debris, or blocked filters and drains reduce performance and can cause leakage, odors, or trips
- Door seal, hose, valve, or connection deterioration causes water, steam, gas, or condensate leakage
- Electrical supply, switch, sensor, or control-board faults cause intermittent operation, failed cycles, or protective trips
Service: Inspect cleanliness, guards, doors and seals, electrical supply and earthing, hoses, drains, filters, thermostats, safety cut-outs, ventilation, and leakage. Clean and descale as appropriate and follow the manufacturer documentation for exact electrical, gas, and temperature settings.
Spare Parts: Typical spares include door and connection seals, filters, heating or ignition components, switches, thermostats, fuses, pump or fan service items, and critical control parts recommended for the appliance.
Use Cases: Used on merchant, passenger, offshore, ferry, naval, and accommodation vessels to support crew and passenger hotel services.
Bear 6GN electric
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element, burner, thermostat, or temperature-control failure causes slow heating, overheating, or inability to reach the selected condition
- Pump, fan, motor, or drive faults cause poor circulation, washing, extraction, or cooling depending on the appliance
- Scale, grease, food debris, or blocked filters and drains reduce performance and can cause leakage, odors, or trips
- Door seal, hose, valve, or connection deterioration causes water, steam, gas, or condensate leakage
- Electrical supply, switch, sensor, or control-board faults cause intermittent operation, failed cycles, or protective trips
Service: Inspect cleanliness, guards, doors and seals, electrical supply and earthing, hoses, drains, filters, thermostats, safety cut-outs, ventilation, and leakage. Clean and descale as appropriate and follow the manufacturer documentation for exact electrical, gas, and temperature settings.
Spare Parts: Typical spares include door and connection seals, filters, heating or ignition components, switches, thermostats, fuses, pump or fan service items, and critical control parts recommended for the appliance.
Use Cases: Used on merchant, passenger, offshore, ferry, naval, and accommodation vessels to support crew and passenger hotel services.
Bear 6GN gas
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating or wash-process failure caused by heater, burner, pump or control faults, noticed as poor temperature rise or incomplete cycles
- Water/steam/drain fault caused by scale, blocked filters, valves or pumps, noticed as alarms, leakage or standing water
- Door seal or interlock failure caused by wear, noticed as leakage or inability to start safely
- Fan/spray/dosing failure caused by motor, nozzle or chemical-feed faults, noticed as uneven cooking or poor cleaning results
- Temperature sensor or controller failure caused by probe/electronics faults, noticed as unstable operation or error codes
Service: Inspect heating source, water system, drains, filters, pumps/fans, door seals and interlocks, dosing or steam systems where fitted, and secure marine mounting. Verify ventilation and safe electrical/gas isolation. Descale and clean only using manufacturer-approved methods.
Spare Parts: Carry door seals, fuses, temperature sensors, water filters, pump/fan service parts, spray/dosing components and manufacturer-approved burner/ignition parts for gas versions. Maintain specified cleaning and treatment consumables.
Use Cases: Used in merchant and passenger-ship galleys for high-volume cooking, steaming or washing of crockery and utensils.
Bear 10GN electric
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element or burner failure caused by component wear or control faults, resulting in slow heating or inability to reach the selected condition
- Temperature-sensor or thermostat malfunction caused by drift or electrical failure, resulting in unstable or incorrect temperature
- Door, lid or seal deterioration caused by repeated use, resulting in heat loss, steam leakage or poor cooking performance
- Electrical-control faults caused by moisture, loose terminals or failed relays, resulting in intermittent operation or breaker trips
- Drain, steam or ventilation restriction where applicable caused by grease or food deposits, resulting in poor operation, leakage or overheating
Service: Keep heating surfaces, drains, ventilation paths and accessible seals clean. Inspect electrical terminals, controls, door mechanisms and safety interlocks for heat damage or looseness. Verify temperature control with the vessel's approved maintenance method and investigate repeated overheating or breaker trips. Check secure fastening to the galley structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and heating components. Refer to the manufacturer documentation for exact electrical ratings, calibration procedures and service limits.
Spare Parts: Keep door or lid seals, thermostats or temperature sensors, selected heating elements, fuses, lamps, switches and manufacturer-recommended control parts appropriate to the model. High-use passenger vessels may justify additional wear components. Verify all electrical parts against the appliance nameplate.
Use Cases: Food preparation and catering service in merchant-ship, ferry, cruise-ship and offshore galley installations.
Bear 10GN gas
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating or wash-process failure caused by heater, burner, pump or control faults, noticed as poor temperature rise or incomplete cycles
- Water/steam/drain fault caused by scale, blocked filters, valves or pumps, noticed as alarms, leakage or standing water
- Door seal or interlock failure caused by wear, noticed as leakage or inability to start safely
- Fan/spray/dosing failure caused by motor, nozzle or chemical-feed faults, noticed as uneven cooking or poor cleaning results
- Temperature sensor or controller failure caused by probe/electronics faults, noticed as unstable operation or error codes
Service: Inspect heating source, water system, drains, filters, pumps/fans, door seals and interlocks, dosing or steam systems where fitted, and secure marine mounting. Verify ventilation and safe electrical/gas isolation. Descale and clean only using manufacturer-approved methods.
Spare Parts: Carry door seals, fuses, temperature sensors, water filters, pump/fan service parts, spray/dosing components and manufacturer-approved burner/ignition parts for gas versions. Maintain specified cleaning and treatment consumables.
Use Cases: Used in merchant and passenger-ship galleys for high-volume cooking, steaming or washing of crockery and utensils.
Bear 20GN electric
unverified
· 15.0 kW
Power (kW)
15
Voltage (V)
400
Capacity
20 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element or burner failure caused by component wear or control faults, resulting in slow heating or inability to reach the selected condition
- Temperature-sensor or thermostat malfunction caused by drift or electrical failure, resulting in unstable or incorrect temperature
- Door, lid or seal deterioration caused by repeated use, resulting in heat loss, steam leakage or poor cooking performance
- Electrical-control faults caused by moisture, loose terminals or failed relays, resulting in intermittent operation or breaker trips
- Drain, steam or ventilation restriction where applicable caused by grease or food deposits, resulting in poor operation, leakage or overheating
Service: Keep heating surfaces, drains, ventilation paths and accessible seals clean. Inspect electrical terminals, controls, door mechanisms and safety interlocks for heat damage or looseness. Verify temperature control with the vessel's approved maintenance method and investigate repeated overheating or breaker trips. Check secure fastening to the galley structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and heating components. Refer to the manufacturer documentation for exact electrical ratings, calibration procedures and service limits.
Spare Parts: Keep door or lid seals, thermostats or temperature sensors, selected heating elements, fuses, lamps, switches and manufacturer-recommended control parts appropriate to the model. High-use passenger vessels may justify additional wear components. Verify all electrical parts against the appliance nameplate.
Use Cases: Food preparation and catering service in merchant-ship, ferry, cruise-ship and offshore galley installations.
Bear 20GN gas
unverified
· 15.0 kW
Power (kW)
15
Voltage (V)
400
Capacity
20 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating or wash-process failure caused by heater, burner, pump or control faults, noticed as poor temperature rise or incomplete cycles
- Water/steam/drain fault caused by scale, blocked filters, valves or pumps, noticed as alarms, leakage or standing water
- Door seal or interlock failure caused by wear, noticed as leakage or inability to start safely
- Fan/spray/dosing failure caused by motor, nozzle or chemical-feed faults, noticed as uneven cooking or poor cleaning results
- Temperature sensor or controller failure caused by probe/electronics faults, noticed as unstable operation or error codes
Service: Inspect heating source, water system, drains, filters, pumps/fans, door seals and interlocks, dosing or steam systems where fitted, and secure marine mounting. Verify ventilation and safe electrical/gas isolation. Descale and clean only using manufacturer-approved methods.
Spare Parts: Carry door seals, fuses, temperature sensors, water filters, pump/fan service parts, spray/dosing components and manufacturer-approved burner/ignition parts for gas versions. Maintain specified cleaning and treatment consumables.
Use Cases: Used in merchant and passenger-ship galleys for high-volume cooking, steaming or washing of crockery and utensils.
Commercial Oven / Combi Steamer Small 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Small 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Small 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Electrolux Professional Marine
22
air-o-steam 6GN electric
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or extraction-component failure causes poor performance, slow operation or inability to reach the required condition
- Temperature sensor, thermostat or control faults cause unstable operation or protective shutdown
- Door seal, hose, drain or valve deterioration causes leakage, heat loss, icing or water accumulation
- Fan, pump, motor or bearing wear causes abnormal noise, reduced circulation or vibration
- Electrical, ignition or safety-interlock faults cause failed starts, nuisance trips or error indications
Service: Inspect seals, controls, heaters or refrigeration components, pumps or fans, water and drain connections, extraction and secure mounting according to the appliance type. Clean grease, scale, ice or food residues from approved areas. Verify safety interlocks and look for heat-damaged wiring, leaks or poor ventilation. Refer to the manufacturer documentation for the exact figure for temperature, loading and service criteria.
Spare Parts: Carry seals, sensors, fuses, control relays, pump or fan parts, heating or ignition components and appliance-specific consumables.
Use Cases: Galley, pantry, food storage and domestic service on merchant, passenger and offshore vessels.
air-o-steam 6GN gas
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating, refrigeration or motor element failure, typically indicated by loss of temperature control, inability to operate or protective trip
- Thermostat/sensor/control fault, typically indicated by incorrect temperature, nuisance alarms or unstable cycling
- Water, drain or door-seal leakage where applicable, typically indicated by leaks, poor cleaning performance or condensation
- Fan, pump or compressor wear where fitted, typically indicated by noise, reduced performance or trip alarms
- Grease/dirt accumulation or blocked filters, typically indicated by reduced airflow, overheating, odor or hygiene issues
Service: Inspect electrical safety, controls, thermostats, seals, drains, filters, fans/pumps/compressors as applicable, ventilation and cleanliness; exact operating temperatures and service limits come from manufacturer documentation.
Spare Parts: Keep door seals, heating elements or thermostats, filters, relays/contactors, pumps/fans and appliance-specific wear parts for critical galley equipment.
Use Cases: Used in ship galleys and domestic spaces on merchant, passenger, offshore and naval vessels. This entry applies specifically to the Commercial Oven / Combi Steamer variant identified as Electrolux Professional Marine air-o-steam 6GN gas.
air-o-steam 10GN electric
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, fan, pump or drive component failure caused by wear, blockage or electrical faults, resulting in poor appliance performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal or guard deterioration caused by repeated use, resulting in leakage, heat loss, cold loss or unsafe access
- Drain, filter or ventilation restriction caused by food residue or grease, resulting in poor performance, odor, water leakage or overheating
Service: Keep cooking, cooling or wash surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the galley structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, selected heating elements, pumps, fans or refrigeration components where applicable, fuses, switches and manufacturer-recommended control parts. High-use passenger vessels may justify additional wear components. Verify all electrical and mechanical parts against the appliance nameplate.
Use Cases: Food preparation, cleaning, extraction, holding and cold storage in merchant-ship, ferry, cruise-ship and offshore galley installations.
air-o-steam 10GN gas
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating, refrigeration or motor element failure, typically indicated by loss of temperature control, inability to operate or protective trip
- Thermostat/sensor/control fault, typically indicated by incorrect temperature, nuisance alarms or unstable cycling
- Water, drain or door-seal leakage where applicable, typically indicated by leaks, poor cleaning performance or condensation
- Fan, pump or compressor wear where fitted, typically indicated by noise, reduced performance or trip alarms
- Grease/dirt accumulation or blocked filters, typically indicated by reduced airflow, overheating, odor or hygiene issues
Service: Inspect electrical safety, controls, thermostats, seals, drains, filters, fans/pumps/compressors as applicable, ventilation and cleanliness; exact operating temperatures and service limits come from manufacturer documentation.
Spare Parts: Keep door seals, heating elements or thermostats, filters, relays/contactors, pumps/fans and appliance-specific wear parts for critical galley equipment.
Use Cases: Used in ship galleys and domestic spaces on merchant, passenger, offshore and naval vessels. This entry applies specifically to the Commercial Oven / Combi Steamer variant identified as Electrolux Professional Marine air-o-steam 10GN gas.
air-o-steam 20GN electric
unverified
· 15.0 kW
Power (kW)
15
Voltage (V)
400
Capacity
20 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, fan, pump or drive component failure caused by wear, blockage or electrical faults, resulting in poor appliance performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal or guard deterioration caused by repeated use, resulting in leakage, heat loss, cold loss or unsafe access
- Drain, filter or ventilation restriction caused by food residue or grease, resulting in poor performance, odor, water leakage or overheating
Service: Keep cooking, cooling or wash surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the galley structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, selected heating elements, pumps, fans or refrigeration components where applicable, fuses, switches and manufacturer-recommended control parts. High-use passenger vessels may justify additional wear components. Verify all electrical and mechanical parts against the appliance nameplate.
Use Cases: Food preparation, cleaning, extraction, holding and cold storage in merchant-ship, ferry, cruise-ship and offshore galley installations.
air-o-steam 20GN gas
unverified
· 15.0 kW
Power (kW)
15
Voltage (V)
400
Capacity
20 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating, refrigeration or motor element failure, typically indicated by loss of temperature control, inability to operate or protective trip
- Thermostat/sensor/control fault, typically indicated by incorrect temperature, nuisance alarms or unstable cycling
- Water, drain or door-seal leakage where applicable, typically indicated by leaks, poor cleaning performance or condensation
- Fan, pump or compressor wear where fitted, typically indicated by noise, reduced performance or trip alarms
- Grease/dirt accumulation or blocked filters, typically indicated by reduced airflow, overheating, odor or hygiene issues
Service: Inspect electrical safety, controls, thermostats, seals, drains, filters, fans/pumps/compressors as applicable, ventilation and cleanliness; exact operating temperatures and service limits come from manufacturer documentation.
Spare Parts: Keep door seals, heating elements or thermostats, filters, relays/contactors, pumps/fans and appliance-specific wear parts for critical galley equipment.
Use Cases: Used in ship galleys and domestic spaces on merchant, passenger, offshore and naval vessels. This entry applies specifically to the Commercial Oven / Combi Steamer variant identified as Electrolux Professional Marine air-o-steam 20GN gas.
SpeeDelight 2W electric
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or extraction-component failure causes poor performance, slow operation or inability to reach the required condition
- Temperature sensor, thermostat or control faults cause unstable operation or protective shutdown
- Door seal, hose, drain or valve deterioration causes leakage, heat loss, icing or water accumulation
- Fan, pump, motor or bearing wear causes abnormal noise, reduced circulation or vibration
- Electrical, ignition or safety-interlock faults cause failed starts, nuisance trips or error indications
Service: Inspect seals, controls, heaters or refrigeration components, pumps or fans, water and drain connections, extraction and secure mounting according to the appliance type. Clean grease, scale, ice or food residues from approved areas. Verify safety interlocks and look for heat-damaged wiring, leaks or poor ventilation. Refer to the manufacturer documentation for the exact figure for temperature, loading and service criteria.
Spare Parts: Carry seals, sensors, fuses, control relays, pump or fan parts, heating or ignition components and appliance-specific consumables.
Use Cases: Galley, pantry, food storage and domestic service on merchant, passenger and offshore vessels.
SpeeDelight 2W gas
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Loss of electrical, hydraulic, pneumatic, fluid, or other service supply from a protection trip, leakage, blockage, or upstream fault results in failed starting or loss of function
- Mechanical wear, corrosion, fouling, or contamination of moving and wetted parts causes increased noise, leakage, sticking, vibration, or reduced performance
- Seal, gasket, hose, cable, or connection deterioration from age, heat, vibration, or environmental exposure produces visible leakage, intermittent signals, or loss of pressure
- Sensor, switch, actuator, relay, or control-system faults cause incorrect indication, nuisance alarms, failed automatic sequences, or loss of remote control
- Incorrect adjustment, assembly, or maintenance leads to unstable operation, recurrent alarms, or performance that differs from the vessel's normal baseline
Service: Inspect the unit for leakage, corrosion, contamination, loose connections, abnormal noise or vibration, condition of guards and mountings, service supplies, controls, alarms, and functional performance. Use maintenance history to identify deterioration trends and refer to manufacturer documentation for exact settings, tolerances, test values, and overhaul criteria.
Spare Parts: Keep the manufacturer-recommended seals and gaskets, filters where fitted, fuses or protection items, common sensors and switches, and critical actuator, control, or wear components appropriate to the installed configuration. Exact part numbers and quantities must come from the manufacturer spare-parts documentation.
Use Cases: Used on vessel types fitted with galley & domestic equipment, including merchant, offshore, passenger, fishing, or workboat installations where this specific commercial oven / combi steamer duty is required.
SpeeDelight 4W electric
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or extraction-component failure causes poor performance, slow operation or inability to reach the required condition
- Temperature sensor, thermostat or control faults cause unstable operation or protective shutdown
- Door seal, hose, drain or valve deterioration causes leakage, heat loss, icing or water accumulation
- Fan, pump, motor or bearing wear causes abnormal noise, reduced circulation or vibration
- Electrical, ignition or safety-interlock faults cause failed starts, nuisance trips or error indications
Service: Inspect seals, controls, heaters or refrigeration components, pumps or fans, water and drain connections, extraction and secure mounting according to the appliance type. Clean grease, scale, ice or food residues from approved areas. Verify safety interlocks and look for heat-damaged wiring, leaks or poor ventilation. Refer to the manufacturer documentation for the exact figure for temperature, loading and service criteria.
Spare Parts: Carry seals, sensors, fuses, control relays, pump or fan parts, heating or ignition components and appliance-specific consumables.
Use Cases: Galley, pantry, food storage and domestic service on merchant, passenger and offshore vessels.
SpeeDelight 4W gas
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Loss of electrical, hydraulic, pneumatic, fluid, or other service supply from a protection trip, leakage, blockage, or upstream fault results in failed starting or loss of function
- Mechanical wear, corrosion, fouling, or contamination of moving and wetted parts causes increased noise, leakage, sticking, vibration, or reduced performance
- Seal, gasket, hose, cable, or connection deterioration from age, heat, vibration, or environmental exposure produces visible leakage, intermittent signals, or loss of pressure
- Sensor, switch, actuator, relay, or control-system faults cause incorrect indication, nuisance alarms, failed automatic sequences, or loss of remote control
- Incorrect adjustment, assembly, or maintenance leads to unstable operation, recurrent alarms, or performance that differs from the vessel's normal baseline
Service: Inspect the unit for leakage, corrosion, contamination, loose connections, abnormal noise or vibration, condition of guards and mountings, service supplies, controls, alarms, and functional performance. Use maintenance history to identify deterioration trends and refer to manufacturer documentation for exact settings, tolerances, test values, and overhaul criteria.
Spare Parts: Keep the manufacturer-recommended seals and gaskets, filters where fitted, fuses or protection items, common sensors and switches, and critical actuator, control, or wear components appropriate to the installed configuration. Exact part numbers and quantities must come from the manufacturer spare-parts documentation.
Use Cases: Used on vessel types fitted with galley & domestic equipment, including merchant, offshore, passenger, fishing, or workboat installations where this specific commercial oven / combi steamer duty is required.
Commercial Oven / Combi Steamer Small 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Small 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Small 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Commercial Oven / Combi Steamer Medium 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Medium 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Medium 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Large 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Large 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Large 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer XL 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer XL 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer XL 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
MKN Marine
22
FlexiChef 6GN electric
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element, burner or temperature-control failure causes slow warm-up, uneven cooking or inability to reach the selected temperature
- Steam-generation or water-supply faults cause poor humidification, scaling or steam-related alarms
- Door-seal wear causes heat or steam leakage and reduced cooking efficiency
- Fan or circulation-motor failure causes uneven temperature distribution and abnormal noise
- Control-board, sensor or safety-interlock faults cause error messages, failed starts or unexpected shutdown
Service: Inspect door seals, hinges, heating system, fans, sensors, water and drain connections and ventilation clearances. Remove scale and grease from approved areas and verify safety interlocks. Check electrical terminals for heat damage and confirm secure marine fastening. Refer to manufacturer documentation for exact cleaning chemicals, temperatures and electrical data.
Spare Parts: Carry door seals, temperature sensors, heating or ignition components as applicable, fan or motor service parts, water-valve parts, fuses and control relays.
Use Cases: Merchant, passenger, offshore and naval galleys requiring commercial food preparation.
FlexiChef 6GN gas
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating or wash-process failure caused by heater, burner, pump or control faults, noticed as poor temperature rise or incomplete cycles
- Water/steam/drain fault caused by scale, blocked filters, valves or pumps, noticed as alarms, leakage or standing water
- Door seal or interlock failure caused by wear, noticed as leakage or inability to start safely
- Fan/spray/dosing failure caused by motor, nozzle or chemical-feed faults, noticed as uneven cooking or poor cleaning results
- Temperature sensor or controller failure caused by probe/electronics faults, noticed as unstable operation or error codes
Service: Inspect heating source, water system, drains, filters, pumps/fans, door seals and interlocks, dosing or steam systems where fitted, and secure marine mounting. Verify ventilation and safe electrical/gas isolation. Descale and clean only using manufacturer-approved methods.
Spare Parts: Carry door seals, fuses, temperature sensors, water filters, pump/fan service parts, spray/dosing components and manufacturer-approved burner/ignition parts for gas versions. Maintain specified cleaning and treatment consumables.
Use Cases: Used in merchant and passenger-ship galleys for high-volume cooking, steaming or washing of crockery and utensils.
FlexiChef 10GN electric
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Scale, grease or food residue restricts water, air or heat transfer and causes poor performance
- Door seals, valves or hose connections can leak, noticed as water, air or temperature loss
- Heating, refrigeration or motor components can fail, noticed as inability to reach operating condition
- Temperature, level or door sensors can drift or fail and cause alarms or interrupted cycles
- Corroded electrical connections or moisture ingress can cause intermittent operation or protective trips
Service: Keep food-contact and ventilation surfaces clean, inspect seals, filters, drains and electrical condition and verify safe operation of doors and guards. Function-test heating, cooling, wash or extraction modes applicable to the appliance. Exact temperatures, cleaning chemicals and electrical test values must follow the appliance manufacturer documentation and onboard hygiene procedures.
Spare Parts: Typical spares include door gaskets, filters, spray or drain parts, lamps or indicators, thermostats or sensors, heating elements or contactors and service seals appropriate to the appliance.
Use Cases: Used in merchant, passenger, offshore and service vessels for onboard catering, food storage and galley operations.
FlexiChef 10GN gas
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating-element, burner, thermostat, or temperature-control failure causes slow heating, overheating, or inability to reach the selected condition
- Pump, fan, motor, or drive faults cause poor circulation, washing, extraction, or cooling depending on the appliance
- Scale, grease, food debris, or blocked filters and drains reduce performance and can cause leakage, odors, or trips
- Door seal, hose, valve, or connection deterioration causes water, steam, gas, or condensate leakage
- Electrical supply, switch, sensor, or control-board faults cause intermittent operation, failed cycles, or protective trips
Service: Inspect cleanliness, guards, doors and seals, electrical supply and earthing, hoses, drains, filters, thermostats, safety cut-outs, ventilation, and leakage. Clean and descale as appropriate and follow the manufacturer documentation for exact electrical, gas, and temperature settings.
Spare Parts: Typical spares include door and connection seals, filters, heating or ignition components, switches, thermostats, fuses, pump or fan service items, and critical control parts recommended for the appliance.
Use Cases: Used on merchant, passenger, offshore, ferry, naval, and accommodation vessels to support crew and passenger hotel services.
SpaceCombi 6GN electric
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Heating-element, burner or temperature-control failure causes slow warm-up, uneven cooking or inability to reach the selected temperature
- Steam-generation or water-supply faults cause poor humidification, scaling or steam-related alarms
- Door-seal wear causes heat or steam leakage and reduced cooking efficiency
- Fan or circulation-motor failure causes uneven temperature distribution and abnormal noise
- Control-board, sensor or safety-interlock faults cause error messages, failed starts or unexpected shutdown
Service: Inspect door seals, hinges, heating system, fans, sensors, water and drain connections and ventilation clearances. Remove scale and grease from approved areas and verify safety interlocks. Check electrical terminals for heat damage and confirm secure marine fastening. Refer to manufacturer documentation for exact cleaning chemicals, temperatures and electrical data.
Spare Parts: Carry door seals, temperature sensors, heating or ignition components as applicable, fan or motor service parts, water-valve parts, fuses and control relays.
Use Cases: Merchant, passenger, offshore and naval galleys requiring commercial food preparation.
SpaceCombi 6GN gas
unverified
· 6.0 kW
Power (kW)
6
Voltage (V)
400
Capacity
6 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating-element, burner, thermostat, or temperature-control failure causes slow heating, overheating, or inability to reach the selected condition
- Pump, fan, motor, or drive faults cause poor circulation, washing, extraction, or cooling depending on the appliance
- Scale, grease, food debris, or blocked filters and drains reduce performance and can cause leakage, odors, or trips
- Door seal, hose, valve, or connection deterioration causes water, steam, gas, or condensate leakage
- Electrical supply, switch, sensor, or control-board faults cause intermittent operation, failed cycles, or protective trips
Service: Inspect cleanliness, guards, doors and seals, electrical supply and earthing, hoses, drains, filters, thermostats, safety cut-outs, ventilation, and leakage. Clean and descale as appropriate and follow the manufacturer documentation for exact electrical, gas, and temperature settings.
Spare Parts: Typical spares include door and connection seals, filters, heating or ignition components, switches, thermostats, fuses, pump or fan service items, and critical control parts recommended for the appliance.
Use Cases: Used on merchant, passenger, offshore, ferry, naval, and accommodation vessels to support crew and passenger hotel services.
SpaceCombi 10GN electric
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Scale, grease or food residue restricts water, air or heat transfer and causes poor performance
- Door seals, valves or hose connections can leak, noticed as water, air or temperature loss
- Heating, refrigeration or motor components can fail, noticed as inability to reach operating condition
- Temperature, level or door sensors can drift or fail and cause alarms or interrupted cycles
- Corroded electrical connections or moisture ingress can cause intermittent operation or protective trips
Service: Keep food-contact and ventilation surfaces clean, inspect seals, filters, drains and electrical condition and verify safe operation of doors and guards. Function-test heating, cooling, wash or extraction modes applicable to the appliance. Exact temperatures, cleaning chemicals and electrical test values must follow the appliance manufacturer documentation and onboard hygiene procedures.
Spare Parts: Typical spares include door gaskets, filters, spray or drain parts, lamps or indicators, thermostats or sensors, heating elements or contactors and service seals appropriate to the appliance.
Use Cases: Used in merchant, passenger, offshore and service vessels for onboard catering, food storage and galley operations.
SpaceCombi 10GN gas
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
10 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating-element or burner failure caused by component wear or control faults, resulting in slow heating or inability to reach the selected condition
- Temperature-sensor or thermostat malfunction caused by drift or electrical failure, resulting in unstable or incorrect temperature
- Door, lid or seal deterioration caused by repeated use, resulting in heat loss, steam leakage or poor cooking performance
- Electrical-control faults caused by moisture, loose terminals or failed relays, resulting in intermittent operation or breaker trips
- Drain, steam or ventilation restriction where applicable caused by grease or food deposits, resulting in poor operation, leakage or overheating
Service: Keep heating surfaces, drains, ventilation paths and accessible seals clean. Inspect electrical terminals, controls, door mechanisms and safety interlocks for heat damage or looseness. Verify temperature control with the vessel's approved maintenance method and investigate repeated overheating or breaker trips. Check secure fastening to the galley structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and heating components. Refer to the manufacturer documentation for exact electrical ratings, calibration procedures and service limits.
Spare Parts: Keep door or lid seals, thermostats or temperature sensors, selected heating elements, fuses, lamps, switches and manufacturer-recommended control parts appropriate to the model. High-use passenger vessels may justify additional wear components. Verify all electrical parts against the appliance nameplate.
Use Cases: Food preparation and catering service in merchant-ship, ferry, cruise-ship and offshore galley installations.
SpaceCombi 20GN electric
unverified
· 15.0 kW
Power (kW)
15
Voltage (V)
400
Capacity
20 GN 1/1
Fuel
electric
Common Failures & Inspection Points
- Scale, grease or food residue restricts water, air or heat transfer and causes poor performance
- Door seals, valves or hose connections can leak, noticed as water, air or temperature loss
- Heating, refrigeration or motor components can fail, noticed as inability to reach operating condition
- Temperature, level or door sensors can drift or fail and cause alarms or interrupted cycles
- Corroded electrical connections or moisture ingress can cause intermittent operation or protective trips
Service: Keep food-contact and ventilation surfaces clean, inspect seals, filters, drains and electrical condition and verify safe operation of doors and guards. Function-test heating, cooling, wash or extraction modes applicable to the appliance. Exact temperatures, cleaning chemicals and electrical test values must follow the appliance manufacturer documentation and onboard hygiene procedures.
Spare Parts: Typical spares include door gaskets, filters, spray or drain parts, lamps or indicators, thermostats or sensors, heating elements or contactors and service seals appropriate to the appliance.
Use Cases: Used in merchant, passenger, offshore and service vessels for onboard catering, food storage and galley operations.
SpaceCombi 20GN gas
unverified
· 15.0 kW
Power (kW)
15
Voltage (V)
400
Capacity
20 GN 1/1
Fuel
gas
Common Failures & Inspection Points
- Heating-element or burner failure caused by component wear or control faults, resulting in slow heating or inability to reach the selected condition
- Temperature-sensor or thermostat malfunction caused by drift or electrical failure, resulting in unstable or incorrect temperature
- Door, lid or seal deterioration caused by repeated use, resulting in heat loss, steam leakage or poor cooking performance
- Electrical-control faults caused by moisture, loose terminals or failed relays, resulting in intermittent operation or breaker trips
- Drain, steam or ventilation restriction where applicable caused by grease or food deposits, resulting in poor operation, leakage or overheating
Service: Keep heating surfaces, drains, ventilation paths and accessible seals clean. Inspect electrical terminals, controls, door mechanisms and safety interlocks for heat damage or looseness. Verify temperature control with the vessel's approved maintenance method and investigate repeated overheating or breaker trips. Check secure fastening to the galley structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and heating components. Refer to the manufacturer documentation for exact electrical ratings, calibration procedures and service limits.
Spare Parts: Keep door or lid seals, thermostats or temperature sensors, selected heating elements, fuses, lamps, switches and manufacturer-recommended control parts appropriate to the model. High-use passenger vessels may justify additional wear components. Verify all electrical parts against the appliance nameplate.
Use Cases: Food preparation and catering service in merchant-ship, ferry, cruise-ship and offshore galley installations.
Commercial Oven / Combi Steamer Small 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Small 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Small 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, fan, pump or drive component failure caused by wear, blockage or electrical faults, resulting in poor appliance performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal or guard deterioration caused by repeated use, resulting in leakage, heat loss, cold loss or unsafe access
- Drain, filter or ventilation restriction caused by food residue or grease, resulting in poor performance, odor, water leakage or overheating
Service: Keep cooking, cooling or wash surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the galley structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, selected heating elements, pumps, fans or refrigeration components where applicable, fuses, switches and manufacturer-recommended control parts. High-use passenger vessels may justify additional wear components. Verify all electrical and mechanical parts against the appliance nameplate.
Use Cases: Food preparation, cleaning, extraction, holding and cold storage in merchant-ship, ferry, cruise-ship and offshore galley installations.
Commercial Oven / Combi Steamer XL 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, fan, pump or drive component failure caused by wear, blockage or electrical faults, resulting in poor appliance performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal or guard deterioration caused by repeated use, resulting in leakage, heat loss, cold loss or unsafe access
- Drain, filter or ventilation restriction caused by food residue or grease, resulting in poor performance, odor, water leakage or overheating
Service: Keep cooking, cooling or wash surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the galley structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, selected heating elements, pumps, fans or refrigeration components where applicable, fuses, switches and manufacturer-recommended control parts. High-use passenger vessels may justify additional wear components. Verify all electrical and mechanical parts against the appliance nameplate.
Use Cases: Food preparation, cleaning, extraction, holding and cold storage in merchant-ship, ferry, cruise-ship and offshore galley installations.
Commercial Oven / Combi Steamer XL 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, fan, pump or drive component failure caused by wear, blockage or electrical faults, resulting in poor appliance performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal or guard deterioration caused by repeated use, resulting in leakage, heat loss, cold loss or unsafe access
- Drain, filter or ventilation restriction caused by food residue or grease, resulting in poor performance, odor, water leakage or overheating
Service: Keep cooking, cooling or wash surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the galley structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, selected heating elements, pumps, fans or refrigeration components where applicable, fuses, switches and manufacturer-recommended control parts. High-use passenger vessels may justify additional wear components. Verify all electrical and mechanical parts against the appliance nameplate.
Use Cases: Food preparation, cleaning, extraction, holding and cold storage in merchant-ship, ferry, cruise-ship and offshore galley installations.
Franke Marine
12
Commercial Oven / Combi Steamer Small 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Small 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Small 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Hupfer Marine
12
Commercial Oven / Combi Steamer Small 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Small 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Small 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Rieber Marine
12
Commercial Oven / Combi Steamer Small 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Small 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Small 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Medium 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer Large 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Winterhalter Marine
12
Commercial Oven / Combi Steamer Small 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Small 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Small 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Medium 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Medium 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Medium 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Large 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Large 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer Large 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration or motor components can fail from wear or overheating, seen as loss of temperature control or unavailable operation
- Door seals, gaskets or water connections can leak, noticed as moisture, heat loss or poor cooling
- Grease, scale or debris buildup can restrict airflow or drainage, causing overheating, odors or poor performance
- Thermostat, sensor or control faults can produce unstable operation or alarms
- Electrical connection deterioration in humid service can cause nuisance trips or intermittent failure
Service: Inspect controls, heating/cooling elements, fans, seals, drains, electrical connections and cleanliness. Verify safe shutdowns and normal temperature or airflow response. Exact temperature limits, electrical test values and replacement intervals must follow manufacturer documentation.
Spare Parts: Carry common seals, lamps, fuses, thermostats or sensors, fan or heating-element consumables and maker-recommended service parts.
Use Cases: Used on crewed vessels, ferries, cruise ships and offshore units to support accommodation and catering services.
Commercial Oven / Combi Steamer XL 230V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
230
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 400V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
400
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
Commercial Oven / Combi Steamer XL 440V Marine
unverified
· 10.0 kW
Power (kW)
10
Voltage (V)
440
Capacity
standard
Fuel
electric
Common Failures & Inspection Points
- Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
- Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
- Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
- Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
- Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating
Service: Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.
Spare Parts: Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Use Cases: It is used for galley and catering service on merchant ships, passenger vessels, offshore units or other vessel types where this equipment category is fitted.
WELBILT Deutschland
1
Type, 230V / 400V / 440V / 480V, , Convotherm 4 (C4), Marine, 6.20, , 10.20, 12.20, 20.10, 20.20
Model Number
TAP00000NA