"> Metos Marine Bear 10GN electric
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 3 verified suppliers & service companies for Metos Marine in the Maritime Network Find suppliers →
Is Metos Marine your company? Claim this page
Metos Marine

Bear 10GN electric

Metos Marine Bear 10GN electric is identified in the source list as a commercial marine oven or combi steamer. It is normally installed in the ship's galley or catering area with the required electrical, ventilation, drainage or steam connections for the installed design. Its purpose is to cook or regenerate food using the heating and moisture-control functions provided by the installed model. The existing database record states 10 kW. Marine versions require secure installation and controls suitable for frequent use, ship motion and the vessel's galley safety arrangements. The exact model designation identifies appliance capacity, heating method and control package; these details must be confirmed from the manufacturer documentation.

10.0 kW
Power

Components & Design

Component data being added…

Technical Data

power kw 10
capacity 10 GN 1/1
fuel electric

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Heating-element or burner failure caused by component wear or control faults, resulting in slow heating or inability to reach the selected condition
●Temperature-sensor or thermostat malfunction caused by drift or electrical failure, resulting in unstable or incorrect temperature
●Door, lid or seal deterioration caused by repeated use, resulting in heat loss, steam leakage or poor cooking performance
●Electrical-control faults caused by moisture, loose terminals or failed relays, resulting in intermittent operation or breaker trips
●Drain, steam or ventilation restriction where applicable caused by grease or food deposits, resulting in poor operation, leakage or overheating

Service & Maintenance

Keep heating surfaces, drains, ventilation paths and accessible seals clean. Inspect electrical terminals, controls, door mechanisms and safety interlocks for heat damage or looseness. Verify temperature control with the vessel's approved maintenance method and investigate repeated overheating or breaker trips. Check secure fastening to the galley structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and heating components. Refer to the manufacturer documentation for exact electrical ratings, calibration procedures and service limits.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep door or lid seals, thermostats or temperature sensors, selected heating elements, fuses, lamps, switches and manufacturer-recommended control parts appropriate to the model. High-use passenger vessels may justify additional wear components. Verify all electrical parts against the appliance nameplate.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Metos Marine?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #113133 · ✓ still in production