"> Rieber Marine Commercial Oven / Combi Steamer Large 400V Marine
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 2 verified suppliers & service companies for Rieber Marine in the Maritime Network Find suppliers →
Is Rieber Marine your company? Claim this page
Rieber Marine

Commercial Oven / Combi Steamer Large 400V Marine

Rieber Marine Commercial Oven / Combi Steamer Large 400V Marine is identified in the source list as a commercial oven / combi steamer. It is normally installed or arranged in the galley or catering area. Its purpose is to perform the listed cooking, cleaning, holding or cold-storage duty. The source record provides a stated power of 10.0 kW, and the existing record note '10 kW'. The equipment is based on marine-secured appliance structure, heating or cooling elements and controls. The exact model designation distinguishes the installed configuration from neighboring variants in the same category; refer to the manufacturer documentation for the exact figure.

10.0 kW
Power

Components & Design

Component data being added…

Technical Data

power kw 10
capacity standard
fuel electric

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Heating, refrigeration, wash-pump, fan or drive failure caused by component wear, blockage or electrical faults, resulting in poor performance or an incomplete cycle
●Temperature or control-sensor malfunction caused by drift, contamination or electrical failure, resulting in unstable operation or incorrect temperature
●Electrical terminal or contact deterioration caused by heat, moisture or loose connections, resulting in intermittent operation, overheating or breaker trips
●Door, lid, seal, roller or guard deterioration caused by repeated use, resulting in leakage, heat loss, poor finishing or unsafe access
●Drain, filter or ventilation restriction caused by food, lint or grease deposits, resulting in poor performance, odor, water leakage or overheating

Service & Maintenance

Keep working surfaces, filters, drains and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated trips before resetting. Check secure fastening to the ship structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and electrical components. Refer to the manufacturer documentation for the exact figure for electrical ratings, calibration and service settings.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep door or lid seals, temperature sensors, thermostats, heating elements, pumps, fans, belts or refrigeration components as applicable, together with fuses, switches and manufacturer-recommended control parts.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Rieber Marine?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #121983 · ✓ still in production