OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Safety & LSA› EPIRB / SART› AIS-SART
EPIRB / SART

AIS-SART

An AIS-SART broadcasts a distinctive AIS target rather than a radar echo, so it shows up as a labelled icon and position on a searching ship's chart plotter or radar overlay instead of the classic expanding-ring pattern a radar SART produces.

2models
Kelvin Hughes
Knowledge

What to check on an AIS-SART.

2 models from Kelvin Hughes in AIS-SART. Below: the full model list.

What Makes This Type Different

An AIS-SART (Search and Rescue Transponder) transmits a Class A-format AIS position report on the marine AIS frequencies rather than responding to a 9 GHz radar interrogation the way a traditional radar SART does. A searching vessel sees the AIS-SART as a distinct icon with a unique identity on its AIS display or chart plotter, complete with position and a characteristic active-SART symbol, instead of the row of arcs a radar-based SART paints on a 3 cm radar screen. Range depends on the AIS receiver's own reception, generally comparable to standard AIS range at sea, and the two SART types are not interchangeable: a ship without an AIS receiver capable of decoding the distress-mode target will not see an AIS-SART at all, which is why SOLAS survival craft requirements still recognise both device types rather than one replacing the other outright.

AIS-SART operating principle
An activated AIS-SART on its pole mount broadcasts a VHF signal that a searching ship receives as a labelled AIS target on its chart plotter, instead of a radar echo.
Read the full guide

Main Components

Transmitter and Antenna

Compact VHF transmitter broadcasting on the AIS frequencies with a built-in antenna, housed in a floating, buoyant casing.

GPS Receiver

Internal GPS gives the unit its own position fix, which is what gets broadcast in the AIS message — without a valid fix the unit typically still transmits but without a reliable position.

Battery

Sealed primary battery sized for a minimum operating duration once activated, typically rated for a minimum continuous transmission period measured in hours, with a separate standby shelf life measured in years before replacement is due.

Activation Switch and Float-Free Options

Manual activation on handheld units carried by the crew; some installations pair a unit with a float-free bracket similar in principle to an EPIRB bracket, though AIS-SARTs are more commonly carried as manually deployed survival craft equipment.

Selection and Sizing

  • Certification: type-approved to the applicable marine AIS-SART standard and carrying the relevant wheelmark or equivalent flag approval.
  • Battery life: checked against the vessel's typical worst-case time to rescue for its trading area, not just the certified minimum.
  • Quantity per survival craft: set by the vessel's SOLAS equipment scale for the number and type of lifeboats and liferafts carried.
  • Compatibility check: confirmed against the bridge AIS receiver's ability to display the distress-mode target distinctly from ordinary vessel traffic.

Regulations and Class

SOLAS Ch. III recognises AIS-SART as an accepted alternative to a radar SART for survival craft locating equipment on many vessel types, subject to flag administration acceptance and the equipment scale in the ship's safety equipment certificate. Battery expiry and the unit's self-test result are checked at each safety equipment survey, and the device is included in the planned maintenance and testing schedule the same as other GMDSS-adjacent survival equipment.

Typical Faults

  • Battery past its expiry date — unit may activate but transmit for far less than the rated duration, or not at all.
  • Self-test not performed at the required interval — a fault in the transmitter or GPS goes undetected until an actual distress situation.
  • Stowage location not known to the crew — delay in getting the unit into the survival craft during an abandon-ship drill.
  • Antenna or casing damaged by rough handling in storage — reduced transmission range exactly when it matters most.

What to Look for in a Supplier

  • Current type approval and wheelmark or flag-recognised equivalent for the specific model.
  • Battery expiry dated clearly and traceable, with replacement batteries genuinely available rather than requiring a full unit exchange.
  • Self-test function that gives an unambiguous pass/fail indication crew can read without special training.

Brief the crew that an AIS-SART is only visible to ships with a compatible AIS receiver nearby — it is not a substitute for a radar SART where the expected rescue assets are radar-equipped aircraft or ships without AIS decoding for distress targets.

AIS-SART
AIS-SART. Photo: S.J. de Waard, CC BY-SA 3.0, via Wikimedia Commons
Models

Models in this type.

The best-documented model of each manufacturer first, then the next — 2 of 2 models in AIS-SART. Every row links to full specifications, documents and service notes.

Showing only Kelvin Hughes. Show all manufacturers
By manufacturer

Manufacturers.

All 37 manufacturers with models of AIS-SART. Names with a manufacturer page open it; the others open a search across the full library.

All manufacturers
Show all 37 manufacturers
Related types

Also in EPIRB / SART.

The other equipment types in this category.

406 MHz EPIRBEPIRB (406 MHz)EPIRB (406 MHz) Category IEPIRB (406 MHz) Category IIEPIRB/SARTMan Overboard Device (MOB)Personal Locator Beacon (PLB)Radar SARTRadar-SART (9 GHz)Search & Rescue Transponder (SART)
Would you like to know more?

One request. A person reads it and replies by e-mail.

Tell us the manufacturer, the model and what you need — a part, a service call, a second opinion. A person reads every request and replies by e-mail.

No details at hand? A photo of the rating plate or the part is enough — simply attach it to the request.

Frequently asked

Three things people ask first.

Is AIS-SART data free?

Yes. Every model page, every guide and every datasheet for this type is readable without an account. An account adds saved searches and requests, nothing is taken away.

My model is missing — what now?

Send us the nameplate. We identify it by hand, add it to the library, and if you need a part or a service, the request is already on our desk.

Can you source a AIS-SART part?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.