OceanSphereENGINES

MSF Evaporator

Freshwater Generator / Watermaker · Freshwater Generators

Technical data from manufacturer or class sources · not yet verified by a person​‍‌‌‍‌‌⁠​‌‌​‍​⁠​⁠‌‌‍

The Wärtsilä MSF Evaporator is a multi-stage flash freshwater generator used to produce distillate from seawater or another approved feed stream. The process heats the feed and then flashes part of it into vapour through a sequence of stages operating at progressively reduced pressure under vacuum. Vapour is condensed to form freshwater while concentrated brine is removed from the process. On ships the evaporator can use available thermal energy such as engine waste heat or steam, depending on the installed design, and is connected to seawater, distillate, vacuum and heating circuits. Compared with reverse osmosis, the MSF process is thermal and does not rely on high-pressure semi-permeable membranes for salt separation. The exact number of stages, production capacity, heating-medium conditions and distillate-quality limits are installation-specific; refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

SystemCapacity (ton/day) Power (kW)
MSF 115-5115 915
MSF 300-6300 2388
MSF 650-6650 5146
MSF 775-8775 4812
MSF 850-8850 4780
MSF 950-8950 6395
Condenser tube materialCuNi, CuZn
Pipes in contact with seawaterCuNi
Pipes in contact with steam, motor-water, condensateSteel
DistillateCuNi
ShellCuNi
TypeMulti-Stage Flash
Stages2 - 4
Capacity Range30 - 250 m³/day
Heat SourceSteam or jacket water
Performance RatioUp to 8
Output Quality< 5 ppm TDS
MaterialsCupronickel + Titanium
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Trend vacuum, stage temperatures, feed/brine flows, distillate salinity and production. Inspect heat-transfer surfaces, demisters, ejectors, condensers, pumps and vacuum-tight joints for deposits, erosion, corrosion and leakage. Maintain chemical treatment and cleaning practices specified for the feedwater and materials. Test salinity protection and divert arrangements, and use manufacturer documentation for cleaning concentration, vacuum limits and acceptance criteria.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry pump seals and service parts, ejector/nozzle components where fitted, salinity-cell components, level and temperature sensors, valve kits, manway gaskets, demister elements where replaceable and approved descaling consumables. Tube repair materials should only be used under an approved maker procedure.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Wärtsilä equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Freshwater Generator / Watermaker.

Other models of the same equipment type, Wärtsilä first.

By manufacturer Alfa LavalSpectra WatermakersSea RecoverySasakuraSchenker MarineRWO/VeoliaFCI WatermakersAtlas/JowaDamen Marine FWGLenntech MarineMaxim Marine FWGPureflow MarineTecnicomar MarineGEA MarineAmpac USAAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Wärtsilä models More like MSF Evaporator
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Wärtsilä MSF Evaporator — a part, a service call, a second opinion. Are you Wärtsilä? Claim this brand page.

Service engineer? Write the day report for this MSF Evaporator in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.