OceanSphereENGINES
Library› Engine Room› Turbochargers› Turbocharger› Hitachi HT-S HT-71S
Hitachi

HT-S HT-71S

Turbocharger · Turbochargers

Technical data from manufacturer or class sources · not yet verified by a person​‍​‍⁠⁠‌‌​‌​‌⁠​‍⁠​‍​‌
Hitachi in the SpecCodex register — view brand page →

Hitachi HT-S HT-71S — HT-S, 30000 kW max.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Frame SizeHT-71S
Power max (kW)30000
Inspection

Inspector Detail

Common issues

  • Bearing wear (thrust and journal bearings) due to high rotational speeds, thermal stress, and lubrication issues, leading to increased rotor play and vibration.
  • Compressor and turbine side fouling, reducing efficiency, increasing exhaust gas temperatures, and potentially leading to surging.
  • Oil leakage from bearing housing seals or drain lines, indicating seal wear or blocked drains, leading to oil consumption and potential fire hazard.
  • Blade damage (erosion, corrosion, or foreign object damage - FOD) on compressor or turbine wheels, causing imbalance, reduced efficiency, and potential catastrophic failure.
  • Cracks in the turbine casing or exhaust gas inlet/outlet ducts due to thermal cycling and stress, leading to exhaust gas leaks and reduced performance.
  • Rotor imbalance and excessive vibration, often a consequence of fouling, blade damage, or bearing wear, which can escalate to severe mechanical damage.
  • Surging, characterized by unstable airflow, often due to dirty compressor, engine load changes, or issues with the exhaust gas system.

Inspection checklist

  • Check rotor axial and radial play (when engine stopped and cold) against manufacturer's limits to assess bearing wear.
  • Inspect compressor and turbine blades for fouling, erosion, corrosion, and FOD. Note any signs of rubbing on casings.
  • Monitor bearing temperatures and turbocharger vibration levels during operation. Compare with historical data and alarm limits.
  • Check for oil leaks from the bearing housing, drain lines, and air/gas side seals. Verify lubricating oil pressure and flow.
  • Inspect the condition of the air filter elements and the air intake silencer for cleanliness and damage.
  • Examine the turbine and compressor casings, exhaust gas inlet/outlet ducts, and support structures for cracks, corrosion, and loose fastenings.
  • Review engine room logbook data for trends in turbocharger RPM, boost pressure, exhaust gas temperatures (before/after turbine), and scavenge air pressure/temperature.
  • Verify the functionality of the turbocharger's overspeed trip mechanism and associated alarms (if fitted).

Service intervals

Compressor water washingDaily to weekly, or as indicated by performance degradation (e.g., reduced boost pressure, increased differential pressure across compressor).
Turbine water washing (if fitted)Every 250-500 running hours, or as per manufacturer's recommendations based on fuel type and exhaust gas quality.
Bearing inspection and renewal8,000 - 12,000 running hours (or every 1-2 years), often coinciding with intermediate engine overhauls. Includes inspection of thrust and journal bearings, and renewal of sealing rings.
Major overhaul (rotor out, balancing)16,000 - 24,000 running hours (or every 3-5 years), involving complete disassembly, cleaning, inspection of all components, rotor balancing, and renewal of all wear parts.
Air filter cleaning/renewalEvery 500 - 1000 running hours, or more frequently in dusty environments.

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Typical wear limits

Rotor axial playNew: 0.15 - 0.30 mm. Wear limit: 0.40 - 0.60 mm (refer to specific Hitachi manual for exact values).
Rotor radial playNew: 0.05 - 0.15 mm. Wear limit: 0.20 - 0.30 mm (refer to specific Hitachi manual for exact values).
Blade erosion/damageAny visible cracks, significant pitting, or material loss exceeding 10-15% of original blade thickness is typically cause for replacement or repair.
Casing cracksAny visible crack on pressure-retaining parts (turbine casing, compressor casing) is unacceptable and requires repair or replacement.
Bearing clearancesJournal bearing clearance: New 0.08-0.12 mm, wear limit 0.20-0.25 mm (indicative, consult manual).

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Complete set of bearings (thrust and journal bearings) for one turbocharger.
  • Set of sealing rings (labyrinth seals, oil seals) for both compressor and turbine sides.
  • Full gasket and O-ring kit for complete overhaul.
  • Air filter elements (a minimum of one full set).
  • Specific high-tensile bolts and nuts for casing joints (prone to seizing or damage during disassembly).
  • Lubricating oil pump (if externally driven) or critical internal components (e.g., gears, shaft) if integral.

Safety

  • High temperatures: Exhaust gas temperatures can exceed 500°C, and casing surfaces can be extremely hot. Risk of severe burns.
  • High rotational speeds: The rotor operates at tens of thousands of RPM. Catastrophic failure (e.g., blade disintegration) can release high-energy fragments.
  • High pressures: Boost air and exhaust gas are under significant pressure. Improper handling or failure can lead to sudden release.
  • Stored energy: Even after engine shutdown, the rotor can continue to spin for an extended period. Never attempt to stop it manually.
  • Heavy components: During maintenance, handling of casings, rotor assembly, and other parts requires proper lifting gear and procedures to prevent injury.

Class survey

Class surveyors typically check the turbocharger's external condition for leaks, cracks, and proper securing. They will review maintenance records, running hours, and performance logs to ensure compliance with planned maintenance systems. During major surveys (e.g., 5-year special survey), an internal inspection of the turbocharger (rotor out) is often required to assess the condition of blades, bearings, and casings, ensuring structural integrity and safe operation. Verification of overspeed trip functionality and alarm settings is also a common check. The surveyor will ensure that critical spares are onboard as per class requirements.

Estimated lifetime: 80,000 - 120,000 running hours before major component replacement (e.g., new rotor assembly) or end-of-life, assuming regular maintenance and adherence to overhaul schedules.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Hitachi equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Turbocharger.

Other models of the same equipment type, Hitachi first.

By manufacturer ABBMAN Energy SolutionsIHIMitsubishiABB Turbocharging / AccelleronKawasakiPBSTCummins Holset TurbochargersNapierMAN ES TurbochargingMitsubishi METGarrett Motion MarineVolvo Pentaengine.od / Other TurbochargersKBB TurboAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like HT-S HT-71S
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Hitachi HT-S HT-71S — a part, a service call, a second opinion. Are you Hitachi? Claim this brand page.

Service engineer? Write the day report for this HT-S HT-71S in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.