OceanSphereENGINES
Library› Engine Room› Turbochargers› Turbocharger› Hitachi HT-C HT-68C
Hitachi

HT-C HT-68C

Turbocharger · Turbochargers

Technical data from manufacturer or class sources · not yet verified by a person​‍​‍⁠⁠‌​⁠​‍‌​‍⁠​⁠‌⁠‍
Hitachi in the SpecCodex register — view brand page →

Hitachi HT-C HT-68C — HT-C, 40000 kW max.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Frame SizeHT-68C
Power max (kW)40000
Inspection

Inspector Detail ✓ verified

Common issues

  • Bearing wear (journal and thrust bearings) leading to excessive rotor play and vibration, often exacerbated by contaminated lube oil or insufficient oil pressure.
  • Compressor side fouling (dirt, oil mist, salt deposits) reducing efficiency, causing surging, and increasing air filter differential pressure.
  • Turbine side fouling (soot, unburnt fuel residues) leading to reduced efficiency, increased exhaust back pressure, higher exhaust temperatures, and potential blade erosion.
  • Nozzle ring and cover ring deformation, cracking, or erosion due to high thermal stress and corrosive exhaust gases, impacting turbine efficiency.
  • Oil leakage from bearing casings, often due to worn sealing rings (labyrinth or piston ring type), blocked oil drain lines, or excessive crankcase pressure.
  • Rotor imbalance or damage (e.g., foreign object damage, blade erosion/cracking) causing high vibration, noise, and potential catastrophic failure.
  • Surging, indicated by characteristic 'whooshing' sound, fluctuating boost pressure, and increased exhaust temperature, often due to fouling, incorrect engine load, or damaged components.
  • Overspeed trip malfunction or incorrect setting, a critical safety concern that can lead to rotor disintegration.

Inspection checklist

  • Check axial and radial rotor play (clearances) using a dial gauge; compare against manufacturer's specified limits. Pay attention to any 'feel' of roughness.
  • Visually inspect compressor impeller and turbine blades for fouling, erosion, foreign object damage, and cracks. Note any unusual deposits or signs of rubbing.
  • Inspect air filter elements for cleanliness and integrity; ensure no bypass leakage and that differential pressure is within limits.
  • Check for oil leakage from bearing housings, oil drain lines, and connections. Verify oil level and quality in the turbocharger's dedicated lubrication system (if applicable).
  • Monitor turbocharger vibration levels using onboard monitoring systems or portable vibrometers; investigate any spikes, trends, or changes in vibration signature.
  • Verify boost pressure and exhaust gas temperatures (inlet/outlet) are within normal operating parameters for the current engine load and compare against baseline data.
  • Inspect exhaust gas casing and inlet/outlet ducts for signs of cracking, corrosion, hot spots, or insulation damage.
  • Check condition of nozzle ring and diffuser for fouling, erosion, and deformation (requires opening turbine side during planned maintenance).
  • Confirm proper operation and setting of the overspeed trip mechanism, typically by manual test or simulated overspeed.

Service intervals

Water washing (compressor/turbine)Daily to weekly, depending on fuel quality, engine load profile, and operating conditions.
Dry cleaning (turbine)Weekly to monthly, as required by performance monitoring.
Bearing inspection (axial/radial play)4,000 - 8,000 running hours or annually, whichever comes first.
Bearing replacement (journal/thrust)8,000 - 16,000 running hours or as indicated by wear, vibration, or manufacturer's recommendations.
Major overhaul (rotor removal, cleaning, inspection, balancing, component replacement)16,000 - 24,000 running hours or every 3-5 years, whichever comes first. This includes detailed inspection of casings, nozzle ring, and diffuser.

Typical wear limits

Axial rotor playNew: 0.15 - 0.30 mm. Max allowable: 0.40 - 0.50 mm. Exceeding this indicates significant thrust bearing wear.
Radial rotor play (journal bearing clearance)New: 0.08 - 0.15 mm. Max allowable: 0.20 - 0.25 mm. Exceeding this indicates journal bearing wear and potential rotor instability.
Compressor/Turbine blade tip clearanceNew: 0.5 - 1.5 mm. A significant increase (e.g., >2 mm) indicates bearing wear or casing deformation. Any rubbing marks are critical.
Rotor shaft run-outMax allowable: 0.03 - 0.05 mm (measured at specific points, typically near bearing journals). Exceeding this indicates a bent shaft or imbalance.
Nozzle ring deformation/crackingAny visible cracks, significant warping (>1-2 mm), or erosion affecting gas flow should be investigated and typically necessitates replacement.

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Complete set of journal and thrust bearings (including pads, collars, and sleeves) for one turbocharger.
  • Sealing rings (labyrinth seals, piston rings) for both compressor and turbine sides, as these are wear items.
  • Gasket and O-ring sets for casing joints, oil lines, and inspection covers.
  • Air filter elements (if applicable, for turbocharger air intake) – sufficient quantity for at least one replacement cycle.
  • Lubricating oil pump (if externally driven) or its critical components like impellers/gears and seals.
  • Nozzle ring segments (if modular) or a complete nozzle ring, as these are prone to thermal deformation and erosion.
  • Emergency spare rotor cartridge (less common for this size due to cost and logistics, but highly recommended for critical applications to minimize downtime).

Safety

  • High rotational speeds (typically 15,000-20,000 RPM for this size) pose a severe shrapnel hazard in case of rotor failure. Always ensure proper guarding and respect exclusion zones.
  • Extremely high surface temperatures of turbine casing and exhaust ducts (up to 500-600°C) requiring proper insulation, lagging, and caution to prevent severe burns and fire risk.
  • Potential for hot exhaust gas leaks, leading to fire risk, personnel burns, and toxic gas exposure. Regular inspection of expansion bellows and flange connections is vital.
  • Stored energy in compressed air lines and potential for sudden pressure release during maintenance. Always depressurize systems before opening.
  • Confined space entry requirements for internal inspection or maintenance, demanding proper ventilation, gas testing, and adherence to permit-to-work procedures.

Class survey

Class surveyors will meticulously review the turbocharger's maintenance records, including running hours, cleaning logs, bearing inspection reports, and any major overhaul documentation. They will conduct a thorough visual inspection of the external condition, checking for oil leaks, insulation integrity, signs of overheating, and proper securing. Vibration levels will be checked, and the functionality of the overspeed trip device may be verified, often by requesting a demonstration or reviewing test records. If any anomalies are noted (e.g., persistently high vibration, excessive smoke from the engine, poor engine performance, or suspicious oil analysis results), the surveyor may request an opening inspection of the bearings or rotor for detailed assessment. Compliance with exhaust gas emission regulations (Tier II in this case) and the proper functioning of associated monitoring equipment (e.g., NOx sensors) will also be part of the overall engine survey, as the turbocharger's performance directly impacts emissions.

Estimated lifetime: 16,000 - 24,000 running hours before requiring a major overhaul (rotor removal, balancing, bearing replacement, and extensive cleaning/inspection). The main casings and structural components are designed for a much longer service life, often exceeding 100,000 hours, provided regular maintenance and timely replacement of wear parts.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Hitachi equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Turbocharger.

Other models of the same equipment type, Hitachi first.

By manufacturer ABBMAN Energy SolutionsIHIMitsubishiABB Turbocharging / AccelleronKawasakiPBSTCummins Holset TurbochargersNapierMAN ES TurbochargingMitsubishi METGarrett Motion MarineVolvo Pentaengine.od / Other TurbochargersKBB TurboAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like HT-C HT-68C
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Hitachi HT-C HT-68C — a part, a service call, a second opinion. Are you Hitachi? Claim this brand page.

Service engineer? Write the day report for this HT-C HT-68C in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.