OceanSphereENGINES
Library› Engine Room› Turbochargers› Turbocharger› Hitachi HT-C HT-65C
Hitachi

HT-C HT-65C

Turbocharger · Turbochargers

Technical data from manufacturer or class sources · not yet verified by a person​‍​‍⁠⁠‌​‍⁠‌‌‍‌​​⁠​​​
Hitachi in the SpecCodex register — view brand page →

Hitachi HT-C HT-65C — HT-C, 40000 kW max.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Frame SizeHT-65C
Power max (kW)40000
Inspection

Inspector Detail ✓ verified

Common issues

  • Bearing wear (journal and thrust bearings), leading to increased clearances and vibration.
  • Compressor fouling due to intake air contamination or oil carry-over from seals, reducing efficiency and air flow.
  • Turbine fouling and erosion/corrosion from exhaust gas contaminants (e.g., vanadium, sulfur from HFO), leading to reduced efficiency and potential blade damage.
  • Rotor imbalance caused by uneven fouling, blade damage, or bearing wear, resulting in excessive vibration.
  • Oil leakage from bearing housing seals, indicating seal wear or improper oil pressure.
  • Cracks in turbine or compressor casings due to thermal stress, vibration, or material fatigue.
  • Turbocharger surging, often linked to engine load changes, exhaust gas system issues, or severe fouling.
  • Damage to nozzle ring or diffuser, affecting gas flow and turbocharger performance.

Inspection checklist

  • Check rotor axial and radial clearances against manufacturer's specifications (e.g., using a dial gauge).
  • Visually inspect compressor impeller and turbine blades for fouling, erosion, corrosion, and physical damage (e.g., nicks, cracks).
  • Inspect bearing housing for oil leaks and check lubricating oil quality, pressure, and temperature.
  • Examine the condition of the air filter and intake ducting for cleanliness and integrity.
  • Check the integrity of the turbocharger casings (turbine, compressor, bearing housing) for cracks, hot spots, or signs of exhaust gas/air leakage.
  • Verify the security of all mounting bolts and connections (exhaust gas, air, oil, cooling water).
  • Listen for unusual noises (e.g., grinding, whistling) during operation, indicating bearing issues or rotor imbalance.
  • Confirm proper operation of speed sensors, temperature sensors, and any associated control systems.
  • Inspect the nozzle ring and diffuser for blockage, erosion, or damage (requires opening the turbine side).

Service intervals

Daily/WeeklyVisual inspection, performance monitoring, compressor water washing (if fitted).
4,000 - 8,000 hoursCompressor dry cleaning, minor inspection of compressor side, oil filter replacement.
12,000 - 16,000 hoursBearing inspection and/or replacement (journal and thrust), full cleaning of compressor and turbine sides, nozzle ring inspection.
24,000 - 36,000 hoursMajor overhaul including rotor balancing, comprehensive inspection of all components, replacement of worn parts (e.g., seals, bearings, nozzle ring segments), casing crack detection.

Typical wear limits

Rotor axial clearanceRefer to manufacturer's service manual for exact values. Typically, new: 0.15 - 0.30 mm; wear limit: +0.10 mm from new value.
Rotor radial clearanceRefer to manufacturer's service manual for exact values. Typically, new: 0.30 - 0.60 mm; wear limit: +0.15 mm from new value.
Bearing wearVisual inspection for scoring, pitting, discoloration, and excessive play. Replacement if any significant damage or out-of-spec clearances.
Blade tip clearanceVisual inspection for rubbing marks on casing. Specific measurement if possible, but often assessed during overhaul. Excessive clearance reduces efficiency.
Nozzle ring openingVisual inspection for erosion, corrosion, or blockage. Erosion can increase opening, reducing efficiency. Blockage reduces gas flow.

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Complete bearing cartridge set (journal and thrust bearings)
  • Oil seals and O-ring kits for bearing housing
  • Air filter elements
  • Nozzle ring segments or complete nozzle ring (depending on design and engine operating profile)
  • Gasket set for overhaul
  • Speed sensor
  • Lubricating oil pump (if external and critical for operation)

Safety

  • High surface temperatures of turbine casing and exhaust gas piping, posing burn hazards.
  • High rotational speeds of the rotor (up to 15,000 RPM for large units), creating a risk of rotor disintegration in case of severe imbalance or bearing failure.
  • High noise levels during operation, requiring hearing protection in the vicinity.
  • Hot lubricating oil under pressure, posing a risk of spray or leakage during maintenance or failure.
  • Heavy lifting and specialized tools required for maintenance, posing crushing or injury risks if not handled correctly.

Class survey

Class surveyors typically review the turbocharger's maintenance records, running hours, and previous survey reports. They will conduct an external visual inspection for leaks, cracks, and secure mounting. During scheduled overhauls, they will verify bearing clearances (axial and radial), inspect the condition of the compressor and turbine sides (fouling, damage), and confirm the integrity of the casings. Functionality of safety devices such as overspeed trips and alarms will be checked. Compliance with the manufacturer's recommended service schedule and the availability of critical spare parts onboard are also key points of verification.

Estimated lifetime: 100,000 - 150,000 hours for main structural components (casings, rotor shaft) with regular maintenance and replacement of wear parts (bearings, seals, nozzle ring, etc.).

Need this part?

Request a quote for this model.

Free of charge — send us your request for Hitachi equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Turbocharger.

Other models of the same equipment type, Hitachi first.

By manufacturer ABBMAN Energy SolutionsIHIMitsubishiABB Turbocharging / AccelleronKawasakiPBSTCummins Holset TurbochargersNapierMAN ES TurbochargingMitsubishi METGarrett Motion MarineVolvo Pentaengine.od / Other TurbochargersKBB TurboAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like HT-C HT-65C
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Hitachi HT-C HT-65C — a part, a service call, a second opinion. Are you Hitachi? Claim this brand page.

Service engineer? Write the day report for this HT-C HT-65C in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.