"> Volcano (Bono) Volcano VC Series
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 2 verified suppliers & service companies for Volcano (Bono) in the Maritime Network Find suppliers →
Volcano (Bono)

Volcano VC Series

Volcano (Bono) Volcano VC Series is a marine composite boiler. It is normally installed in the engine-room steam system with both exhaust-gas heat-recovery and independent fired sections. Its primary purpose is to generate steam from main-engine waste heat at sea and from a burner when exhaust heat is insufficient. It combines functions of an exhaust-gas boiler and auxiliary fired boiler in one pressure system, so both gas-side fouling and burner condition are relevant. The supplied record already contains the available concise model or rating information, so those existing figures are not duplicated here and no additional meaning is inferred from the model code. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

boiler type composite_boiler

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Soot accumulation in the exhaust section raises backpressure and reduces waste-heat recovery
Burner or ignition faults prevent independent steam generation when firing is required
Water-side scale or corrosion reduces heat transfer and damages pressure parts
Tube or gasket leakage causes water loss, steam instability or visible leakage
Level, feedwater or combustion-control faults cause alarms, unstable steaming or protective shutdown

Service & Maintenance

Inspect both fired and exhaust-gas sections, burner, refractory, tubes, soot cleaning, water-level devices, feedwater system and safety valves. Review water chemistry and exhaust backpressure trends. Test burner and boiler protections using approved procedures. Exact limits and cleaning criteria require manufacturer and class documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry burner and ignition parts, soot-cleaning spares, tube-repair provisions where approved, feedwater and valve seals, level-control parts, gaskets and control relays.
Equipment Model #78269 · ✓ still in production