Composite Boiler · Boilers
Volcano (Bono) Volcano VS 0.5t/7bar is a composite boiler. It is normally installed in the engine room or funnel region and combines waste-heat recovery with an auxiliary firing arrangement within the overall boiler plant. Its purpose is to generate steam using engine exhaust heat when available and auxiliary fuel firing when additional or independent steam production is required. The combination of exhaust-gas and fired heating sections means both burner condition and gas-side cleanliness affect plant performance. Refer to approved manufacturer documentation for the exact figures.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect burner or exhaust-gas sections as applicable, feedwater equipment, water-level controls, gauge glasses, safety devices and accessible pressure parts. Maintain boiler-water treatment and investigate abnormal level, pressure or temperature behavior before returning the unit to unattended service. Clean fireside or gas-side heating surfaces when fouling is indicated and inspect for soot accumulation, corrosion and leakage. Function-test alarms, trips, flame safeguards and automatic controls after maintenance. Examine refractory, casing and insulation where fitted for damage or hot spots. Refer to manufacturer, class and statutory documentation for exact pressure settings, water chemistry limits, inspection intervals and acceptance criteria.
Keep burner service parts where fitted, ignition and flame-detection components, gaskets, gauge-glass consumables, feedwater-control parts and selected sensors recommended by the manufacturer. Pressure-part repair materials and safety-valve components must follow approved vessel and class procedures. Confirm exact spares from the boiler and burner documentation.
Free of charge — send us your request for Volcano (Bono) equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Volcano (Bono) first.
Tell us what you need for this Volcano (Bono) VS 0.5t/7bar — a part, a service call, a second opinion. Are you Volcano (Bono)? Claim this brand page.
Service engineer? Write the day report for this VS 0.5t/7bar in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.