Mooring Winch · Anchor & Mooring Equipment
Kongsberg Maritime BV-MW-800 is a marine mooring winch. It is normally installed on the forecastle, poop deck or another mooring station aligned with fairleads, chocks and mooring leads. Its primary purpose is to heave, pay out and hold mooring rope or wire during berthing, unberthing and line-tending operations. Compared with an anchor windlass, the mooring winch is arranged around rope or wire drums and line control rather than anchor-chain lifting through a wildcat. For exact pull, holding load, brake setting, rope capacity, motor or hydraulic ratings and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect drums, brakes, clutches, bearings, gearbox, foundations, fairlead alignment and hydraulic or electric drive. Examine mooring rope or wire for damage and confirm safe spooling and guarding. Test local and remote controls, emergency stop and brake function under the approved vessel procedure. Refer to manufacturer and class documentation for the exact figure for brake settings, pull, holding loads, rope limits and wear criteria.
Carry approved brake parts, hydraulic seals and hoses where applicable, control-valve or contactor spares, lubrication items, clutch components, limit switches and line-guide service parts.
Free of charge — send us your request for Kongsberg Maritime equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Kongsberg Maritime first.
Tell us what you need for this Kongsberg Maritime BV-MW-800 — a part, a service call, a second opinion. Are you Kongsberg Maritime? Claim this brand page.
Service engineer? Write the day report for this BV-MW-800 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.