BV-MW-1000
Kongsberg Maritime BV-MW-1000 is a marine mooring winch. It is normally installed on the forecastle, poop deck or another mooring station aligned with fairleads, chocks and mooring leads. Its primary purpose is to heave, pay out and hold mooring rope or wire during berthing, unberthing and line-tending operations. Compared with an anchor windlass, the mooring winch is arranged around rope or wire drums and line control rather than anchor-chain lifting through a wildcat. The supplied record already contains the available concise model or rating information, so those existing figures are not duplicated here and no additional meaning is inferred from the model code. For exact pull, holding load, brake setting, rope capacity, motor or hydraulic ratings and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect drums, brakes, clutches, bearings, gearbox, foundations, fairlead alignment and hydraulic or electric drive. Examine mooring rope or wire for damage and confirm safe spooling and guarding. Test local and remote controls, emergency stop and brake function under the approved vessel procedure. Refer to manufacturer and class documentation for the exact figure for brake settings, pull, holding loads, rope limits and wear criteria.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →