Anchor Windlass · Anchor & Mooring Equipment
Kongsberg Maritime BV-EW-1000 is a anchor windlass (Anchor & Mooring Equipment / Anchor Windlass). It is normally installed on the forecastle at the anchor handling station. It is intended to heave, lower and secure the vessel's anchor chain. The meaning of any embedded size or rating code should be confirmed in manufacturer documentation. In service it interfaces with electric or hydraulic drive, brakes, clutches, drums or wildcats, foundations, controls and the associated rope, wire or chain.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect foundations, drums or wildcats, brakes, clutches, gears, bearings, hydraulic hoses, electrical equipment and guards. Test local controls, emergency stop and brake operation and inspect the condition and spooling of rope, wire or chain. Exact brake settings, load limits and discard criteria must follow approved manufacturer, class and vessel documentation.
Carry brake-lining or brake-service parts, hydraulic seals and filters where applicable, control switches, coupling elements, lubrication products and selected bearings or gear service parts according to criticality.
Free of charge — send us your request for Kongsberg Maritime equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Kongsberg Maritime first.
Tell us what you need for this Kongsberg Maritime BV-EW-1000 — a part, a service call, a second opinion. Are you Kongsberg Maritime? Claim this brand page.
Service engineer? Write the day report for this BV-EW-1000 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.