SA - Self-Priming Centrifugal Pump
DESMI SA - Self-Priming Centrifugal Pump — Seawater and freshwater cooling, bilge/ballast, fire-fighting, emergency applications.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Inspect for leakage at pump shaft seal gland; check for weeping, dripping, or active seawater intrusion. Monitor salt crystallization or corrosion deposits around seal area.
Monitor pump discharge pressure/flow vs. design curve; listen for cavitation noise (grinding/crackling); inspect impeller for erosion pitting or blade surface damage during overhaul.
For seawater cooling: inspect bronze/duplex stainless steel casing and impeller for pitting, crevice corrosion, or galvanic attack. Check sacrificial anode condition if installed. Verify material compatibility with sea chest chemistry.
Monitor bearing temperature (infrared or touch), audible noise, and vibration signature. Inspect bearing housings for oil leakage, discoloration, or thermal stress. Verify lubrication level and condition at shaft/impeller bearings.
Check all flange connections (sea chest suction, discharge overboard, cooler inlet/outlet) for active leaks, gasket weeping, or joint movement. Verify bolt torque on international standard flanges per flange rating (DN-dependent).
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →