Reefer Container Monitoring
A reefer monitoring system does not control the container's refrigeration unit; it reads power status, setpoint and alarm data from each plugged-in box and reports it to a central point, which is what lets one or two crew supervise several hundred reefers instead of walking the stacks with a clipboard.
What to check on a Reefer Container Monitoring.
1 models from Emerson Marine in Reefer Container Monitoring. Below: the full model list.
What sets reefer monitoring apart
Each reefer container carries its own self-contained refrigeration unit with its own compressor, controller and setpoint; the ship does not refrigerate the cargo, it only supplies power and, where fitted, monitors what the container's own controller is reporting. Reefer monitoring systems read data such as supply current, return air temperature, setpoint and active alarms from every plugged socket and present it on a central display, so a fault in one box among hundreds is flagged instead of relying on a physical round of the stacks. Some systems only report an alarm; more capable ones log temperature history for the whole voyage, which becomes evidence if a claim is made on the cargo.
Legend
- bridge panel
- status list, all boxes
- data link
- monitoring unit
- reefer container
- refrigeration unit
- deck socket power + data plug
- power, setpoint, alarm
Main components
Reefer sockets and plugs
Standard 3-phase power outlets at each reefer stow position, typically 440 V or 460 V depending on trade, wired back to distribution panels dedicated to reefer load.
Monitoring interface unit
A reader at or near each socket, or a data connection through the container's own PLC where the reefer supports remote monitoring, converting the container's status data into a signal the ship's system can use.
Read the full guide
Data bus and central controller
A shipwide network, often a dedicated bus separate from the main automation system, aggregating every monitored position into one central unit.
Bridge or cargo office display
Software presenting stow position, setpoint, actual temperature and alarm status per container, usually with the ability to log and export data for the whole voyage.
Selection and sizing
- Number of reefer plugs the system must cover against total reefer stow capacity, including any future increase
- Compatibility with the range of reefer container makes expected in service, since older units may lack a data interface and only support current monitoring, not full data readout
- Data logging depth and export format required by the operator's cargo claims process
- Integration with the ship's power management system, since reefer load is a major and variable part of total electrical demand and step loads on start-up matter for generator loading
Regulations and class
There is no SOLAS chapter dedicated to reefer monitoring itself, but class societies offer optional notations for reefer container capability that require a working monitoring and alarm system as part of the class scope, and cargo insurers and major reefer cargo shippers increasingly expect temperature logging as standard practice for claims purposes. Electrical distribution to reefer sockets falls under the same class rules as any other power distribution circuit, including protection coordination and cable sizing for the connected load.
Typical faults
| Fault | Cause | Consequence |
|---|---|---|
| Position shows no data | Faulty monitoring interface unit or a data cable damaged during lashing operations | Blind spot in monitoring even though the reefer itself may be running normally |
| False temperature alarm | Sensor drift in the container's own unit misread by the monitoring system | Unnecessary crew intervention, or a real alarm dismissed as another false one |
| Power loss undetected | Socket or breaker trip not linked into the monitoring bus | Cargo temperature excursion discovered only on discharge |
| Data logging gap | Central unit storage full or network interruption during the voyage | Incomplete temperature record, weakening the ship's position in a cargo claim |
What to look for in a supplier
- Confirmed interface compatibility with the reefer container brands the operator's trade actually uses, not a generic claim of universal compatibility
- Data export in a format accepted by the operator's cargo claims and P&I correspondents
- Alarm escalation logic that distinguishes a real temperature excursion from a brief data dropout
- Spares holding for interface units, since a failed unit at one socket takes that stow position out of monitored service until replaced
Treat a gap in the logged data the same as a temperature alarm until proven otherwise — an unmonitored reefer for part of the voyage is exactly the stretch a cargo claim will focus on.
Models in this type.
The best-documented model of each manufacturer first, then the next — 1 of 1 models in Reefer Container Monitoring. Every row links to full specifications, documents and service notes.
Manufacturers.
All 2 manufacturers with models of Reefer Container Monitoring. Names with a manufacturer page open it; the others open a search across the full library.
All manufacturers in the libraryAlso in Container Systems.
The other equipment types in this category.
Write to us about your machine — the answer comes by e-mail.
Name the make and the model and what the job is: a spare, a service call, a second opinion on a data sheet. We answer by e-mail.
No details at hand? A photo of the rating plate or the part is enough — simply attach it to the request.
Questions that come up with this equipment.
Is Reefer Container Monitoring data free?
Yes. Every model page, every guide and every datasheet for this type is readable without an account. An account adds saved searches and requests, nothing is taken away.
My model is missing — what now?
Send us the nameplate. We identify it by hand, add it to the library, and if you need a part or a service, the request is already on our desk.
Can you source a Reefer Container Monitoring part?
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.