Thermal Oil Heater · Boilers
The Sunrod TOH 2t/7bar is a thermal-oil heater. It is normally installed in the machinery space connected to circulation pumps, expansion tank and heat consumers. It is designed for heating of a closed thermal-fluid circuit for cargo, fuel or process duties. In operation, the fired or waste-heat source transfers energy into circulating thermal oil instead of producing steam. Compared with neighbouring models, the relevant differences are heat duty, flow resistance, thermal-fluid volume, burner/exhaust arrangement and controls; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on circulation, thermal-fluid condition, heater leakage, expansion system, overtemperature trips and fire safety. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect pressure parts or heater coils, heat-source/burner and refractory where applicable, gas-side cleanliness, circulation/feed systems and water or thermal-fluid condition. Verify level, pressure, temperature, flow, safety valves and shutdown/interlock functions applicable to the design. Review treatment, blowdown, soot-cleaning and operating records and use manufacturer/class procedures for pressure tests.
Carry approved gaskets, valve service parts, relevant pump seals/bearings, temperature/pressure/level sensors and heat-source-specific spares such as burner ignition/flame components or soot-cleaning parts. Pressure-part repair materials should only be used under approved manufacturer and class procedures.
Free of charge — send us your request for Sunrod equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Sunrod first.
Tell us what you need for this Sunrod TOH 2t/7bar — a part, a service call, a second opinion. Are you Sunrod? Claim this brand page.
Service engineer? Write the day report for this TOH 2t/7bar in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.