Screw Pump · Pumps
Iron Pump ONPR 100/65 is a screw pump. It is normally installed in an engine-room fuel, lubricating-oil or other viscous-liquid system close to the tanks and treatment equipment it serves. Its purpose is to provide smooth positive-displacement flow where liquid viscosity or suction conditions make a centrifugal pump less suitable. The screw elements and close internal clearances create the pumping action, so cleanliness, lubrication by the handled fluid and correct relief protection are important. The exact model designation and listed power or medium distinguish this pump from neighboring sizes and services; refer to the manufacturer documentation for the exact flow, pressure and viscosity limits.
What our service work and the manufacturer documentation say about keeping this model running.
Check suction strainers, inlet conditions, shaft seals, bearings, drive coupling and relief arrangements. Monitor discharge pressure, noise, vibration and delivery for signs of internal wear or suction starvation. Avoid running the pump dry and verify heating arrangements for viscous fluids where fitted. Inspect for external leakage and confirm the handled fluid is suitable for the installed pump. During overhaul, inspect screws, liners and bearings for scoring or contact. Refer to the manufacturer documentation for exact clearances, relief settings and wear limits.
Keep shaft seals, bearings, gaskets, coupling elements and relief-valve service parts appropriate to the installed model. For critical fuel or lubricating-oil service, manufacturer-recommended rotating or screw-set spares may be justified. Verify exact compatibility by model and serial number.
Free of charge — we forward your request to qualified suppliers for Iron Pump equipment from our network of over 114,000 maritime companies.
Other models of the same equipment type, Iron Pump first.
Tell us what you need for this Iron Pump ONPR 100/65 — a part, a service call, a second opinion. Are you Iron Pump? Claim this brand page.
Service engineer? Write the day report for this ONPR 100/65 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.