Iron Pump ONPR 10/13
Iron Pump Iron Pump ONPR 10/13 is identified in the source list as a screw pump. It is normally installed in an engine-room fuel, lubricating-oil or other viscous-liquid system close to the tanks and treatment equipment it serves. Its purpose is to provide smooth positive-displacement flow where liquid viscosity or suction conditions make a centrifugal pump less suitable. The source record provides the existing record note 'Pumps, fuel'. The screw elements and close internal clearances create the pumping action, so cleanliness, lubrication by the handled fluid and correct relief protection are important. The exact model designation and source-listed power or medium distinguish this pump from neighboring sizes and services; refer to the manufacturer documentation for the exact flow, pressure and viscosity limits.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Check suction strainers, inlet conditions, shaft seals, bearings, drive coupling and relief arrangements. Monitor discharge pressure, noise, vibration and delivery for signs of internal wear or suction starvation. Avoid running the pump dry and verify heating arrangements for viscous fluids where fitted. Inspect for external leakage and confirm the handled fluid is suitable for the installed pump. During overhaul, inspect screws, liners and bearings for scoring or contact. Refer to the manufacturer documentation for exact clearances, relief settings and wear limits.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →