MSP-800-40dB
MaxxSilence MSP-800-40dB is a marine exhaust silencer or muffler in the supplied category 'Exhaust Silencer / Exhaust Silencer / Muffler'. It is normally installed in the exhaust-gas line between an engine or generator and the uptake or funnel. It is intended to attenuate exhaust noise while allowing gas flow through the exhaust system. Compared with neighbouring entries in the same series, the supplied list identifies this unit by its model designation; the meaning of any embedded size or rating code should be confirmed in manufacturer documentation. In service it interfaces with exhaust piping, expansion joints, supports, insulation and the engine or generator exhaust outlet. Model-specific limits, settings, dimensions and acceptance criteria that are not stated in the supplied data should be taken from the manufacturer documentation.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect casing, welds, supports, expansion joints, drains, insulation and signs of exhaust leakage or hot spots. Listen for loose internal components and compare engine exhaust behaviour with normal operating trends. Any backpressure limit, internal inspection interval or repair criterion must be taken from engine and silencer manufacturer documentation.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →