Freshwater Generator / Watermaker · Freshwater Generators
GEA Marine GEA FWG-10 is identified in the source list as a freshwater generator or watermaker. It is normally installed in the engine room or utility machinery space and connected to seawater intake, product-water, reject or brine and treatment systems. Its purpose is to produce freshwater from seawater for domestic or technical use by the process used in the installed unit. The source record provides no additional model-specific operating figure beyond the listed designation and category. The category does not by itself establish whether the exact model uses evaporation, reverse osmosis or another process, so the treatment principle must be confirmed from the manufacturer documentation. The exact model designation and any source-listed capacity distinguish production capability and process arrangement from neighboring units; refer to the manufacturer documentation for the exact figures.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, GEA Marine first.
What our service work and the manufacturer documentation say about keeping this model running.
Trend product-water quantity and quality together with relevant pressures, temperatures or vacuum indications for the installed process. Maintain seawater strainers, filters and treatment or cleaning routines as specified for the unit. Inspect pumps, ejectors, membranes or evaporator surfaces as applicable and investigate any abrupt change in salinity or conductivity. Clean and preserve the system using only procedures compatible with the installed materials. Verify automatic product-water diversion or rejection arrangements after maintenance. Refer to manufacturer documentation for exact cleaning criteria, water-quality limits and operating conditions.
Keep filter elements, seals, gaskets, conductivity or salinity-sensor service parts, pump seals and model-specific treatment components. Membrane elements, evaporator plates or ejector nozzles may be strategic spares depending on the actual process and vessel endurance. Confirm exact materials and parts from the unit documentation.
Free of charge — we forward your request to qualified suppliers for GEA Marine equipment from our network of over 114,000 maritime companies.
Tell us what you need for this GEA Marine FWG-10 — a part, a service call, a second opinion. Are you GEA Marine? Claim this brand page.
Service engineer? Write the day report for this FWG-10 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.