OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Deck› Anchor & Mooring Equipment› Combined Windlass/Mooring› Towimor TW-CMS-500

TW-CMS-500

Combined Windlass/Mooring · Anchor & Mooring Equipment

Technical data from manufacturer or class sources · not yet verified by a person

Towimor TW-CMS-500 is a combined windlass/mooring. It is installed on the forecastle, aft mooring deck or another reinforced deck position aligned with the associated chain, wire or mooring leads. Its purpose is to handle anchor chain, mooring rope or both, depending on the equipment category and vessel arrangement. The machinery combines a structural foundation with windlass or winch drive components, brakes, clutches and chain or rope handling elements appropriate to the installed system. The exact model designation identifies machinery size, drive and chain or rope arrangement; rated pull, holding load and dimensions must be confirmed from approved manufacturer documentation.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Equipment Typecombined
Drive Typeelectro-hydraulic
Pull capacity (kN)500
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect brakes, clutches, wildcats or drums, shafts, bearings, gearcase, foundations and all accessible securing points. Check hydraulic hoses and valves or electrical motors and controls according to the installed drive type. Lubricate specified points and inspect gear oil condition where applicable. Function-test local and remote controls and emergency stopping arrangements without exposing personnel to snap-back or chain danger zones. Examine chain or rope contact surfaces and structural welds for wear, corrosion and cracking. Refer to manufacturer and class documentation for exact brake settings, allowable wear, test loads and inspection criteria.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Keep brake linings or service kits, seals, bearings, hydraulic hose or valve consumables where applicable, control switches and manufacturer-recommended clutch or coupling parts. Heavy gears, shafts, drums and wildcats are normally strategic shore spares rather than routine onboard stock. Confirm exact parts from the model and serial number.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Towimor equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Combined Windlass/Mooring.

Other models of the same equipment type, Towimor first.

By manufacturer MacGregorTowimorNippon PusnesKawasaki Heavy IndustriesDMT Marine Equipment (South Korea)Hatlapa / MAN Energy Solutions (Germany)Kongsberg Maritime ASAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Towimor models More like TW-CMS-500
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this Towimor TW-CMS-500 — a part, a service call, a second opinion. Are you Towimor? Claim this brand page.

Service engineer? Write the day report for this TW-CMS-500 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.