OceanSphereENGINES
Library› Engine Room› Turbochargers› Turbocharger› Kompressorenbau Bannewitz ST4
Kompressorenbau Bannewitz

ST4

Turbocharger · Turbochargers

Technical data from manufacturer or class sources · not yet verified by a person​​‍‌​​‍‌​‌⁠​‌​​​⁠‍​⁠
Per manufacturer datasheetCapacity
Exhaust gas / charge airMedium

The Bannewitz ST4 is a compact turbocharger intended to increase the intake air pressure for marine diesel and gas engines, delivering higher power output while occupying minimal space in the engine room.

Specifications

Technical data.

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Engine Type4-stroke
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Servicing per the manufacturer's manual and classification society requirements. Annual inspection at class survey. Stock spare parts as specified by the manufacturer.

Inspection

Common failures & inspection points

Inspection

Inspector Detail

Common issues

  • Bearing wear (axial and radial play exceeding limits)
  • Compressor wheel fouling (reduced efficiency, surging risk)
  • Turbine wheel and nozzle ring fouling (reduced power, high exhaust gas temperature)
  • Oil leakage (from bearing housing, seals, indicating seal wear or blocked drain)
  • Rotor imbalance (due to deposits or damage, leading to vibration)
  • Air filter clogging (reduced air flow, increased pressure drop)
  • Exhaust gas leaks (from casing joints, manifold connections)

Inspection checklist

  • Bearing Play Check: Measure axial and radial play of the rotor shaft. Compare with manufacturer's limits.
  • Compressor Side Inspection: Check impeller blades for fouling, erosion, foreign object damage (FOD), and tip clearance. Inspect diffuser for deposits.
  • Turbine Side Inspection: Check turbine wheel blades for fouling, erosion, cracks, and tip clearance. Inspect nozzle ring for fouling and damage.
  • Oil System Integrity: Check oil supply and drain lines for leaks, proper flow, and pressure. Inspect oil filter.
  • Casing & Mounting: Inspect compressor and turbine casings for cracks, hot spots, and exhaust gas/air leaks. Verify security of mounting bolts.
  • Air Filter Condition: Check air intake filter for clogging or damage.
  • Rotor Free Rotation: Manually spin rotor (when engine is off and cool) to check for smooth, unrestricted movement and absence of rubbing.
  • Instrumentation & Alarms: Verify functionality of speed sensor, exhaust gas temperature sensors, and associated alarms.
  • Vibration & Noise: Listen for abnormal noises or feel for excessive vibration during operation.

Service intervals

Daily/WeeklyVisual check for leaks, unusual noise/vibration
MonthlyCheck air filter, engine oil level (if shared sump), turbocharger speed
2,000 - 4,000 hrsCompressor wash (water or dry cleaning)
4,000 - 8,000 hrsTurbine wash (water or dry cleaning)
8,000 - 12,000 hrsBearing inspection and replacement (minor overhaul)
16,000 - 24,000 hrsMajor overhaul (full disassembly, cleaning, inspection, balancing, replacement of wear parts)

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Typical wear limits

Axial Bearing PlayNew: 0.10 - 0.25 mm; Max Service Limit: 0.40 - 0.50 mm
Radial Bearing PlayNew: 0.05 - 0.15 mm; Max Service Limit: 0.20 - 0.30 mm
Compressor/Turbine Blade Tip ClearanceTypically 0.3 - 0.8 mm (check for rubbing marks)
Rotor ImbalanceAny visible damage, cracks, or significant erosion on blades requires replacement.

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Complete bearing set (thrust and radial bearings)
  • Oil seals and O-rings for bearing housing
  • Gasket set for casing joints
  • Air filter elements
  • Special tools for disassembly/assembly (e.g., rotor locking tool)
  • Cleaning agents for compressor/turbine washing

Safety

  • High Temperatures: Exhaust casing and turbine components operate at very high temperatures (300-600°C). Risk of severe burns.
  • High-Speed Rotation: Rotor operates at extremely high RPMs (e.g., 20,000-60,000 RPM). Risk of rotor burst if severely imbalanced or damaged.
  • Pressurized Systems: Compressor discharge air is pressurized. Exhaust gas is also under pressure.
  • Noise: High noise levels during operation, requiring hearing protection.
  • Oil Mist/Fire Risk: Oil leaks onto hot surfaces can ignite, leading to engine room fires.

Class survey

Verification of adherence to manufacturer's maintenance schedule and class requirements (logbook entries, overhaul reports, spare parts records). Visual inspection for external leaks (oil, exhaust gas), abnormal noise, vibration, and cleanliness. Confirmation of overspeed trip functionality (if fitted) and proper operation of alarms. Check security of turbocharger mounting and exhaust gas manifold connections. Inspection of insulation on hot surfaces and absence of oil leaks for fire safety. Review of engine room log data for consistent performance parameters.

Estimated lifetime: 16,000 - 24,000 hours before major overhaul; overall frame lifetime 100,000+ hours with proper maintenance

Spares

Replacement Parts

Spare parts notes

Confirm nameplate details before ordering ST4 rotor, bearing or sealing components.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Kompressorenbau Bannewitz equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Turbocharger.

Other models of the same equipment type, Kompressorenbau Bannewitz first.

By manufacturer ABBMAN Energy SolutionsIHIMitsubishiABB Turbocharging / AccelleronKawasakiPBSTCummins Holset TurbochargersNapierMAN ES TurbochargingMitsubishi METGarrett Motion MarineVolvo Pentaengine.od / Other TurbochargersKBB TurboAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like ST4
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Kompressorenbau Bannewitz ST4 — a part, a service call, a second opinion. Are you Kompressorenbau Bannewitz? Claim this brand page.

Service engineer? Write the day report for this ST4 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.