Ballast Pump · Pumps
ACE 045N3 NVBP by IMO is a marine centrifugal pump intended for ballast-water transfer and tank filling/emptying. It is normally installed in the machinery space or pump room with suction and discharge connections arranged to suit the vessel system. The pump converts motor or engine drive into liquid flow and must operate with adequate suction conditions to avoid loss of performance and cavitation. Selection depends on the required duty point, liquid properties, materials, sealing arrangement and available installation space. Compared with neighboring variants in the same product family, the main differences are normally hydraulic size, connection arrangement, materials and drive configuration. Use the manufacturer documentation and vessel drawings to confirm the exact installed configuration before ordering parts or setting maintenance limits.
What our service work and the manufacturer documentation say about keeping this model running.
Centrifugal type; sacrificial anodes recommended.
IMO: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.
Free of charge — send us your request for IMO equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type.
Tell us what you need for this IMO ACE 045N3 NVBP — a part, a service call, a second opinion. Are you IMO? Claim this brand page.
Service engineer? Write the day report for this ACE 045N3 NVBP in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.