OceanSphereENGINES

AC900

Plate Heat Exchanger · Heat Exchangers

Technical data from manufacturer or class sources · not yet verified by a person​‍‌‌‍‌‌⁠‌​​⁠⁠‌​​‍​‌‌

The Alfa Laval S.p.A. AC900 is a single-circuit brazed plate heat exchanger from Alfa Laval's AC family for air-conditioning and refrigeration duties. The AC900 design is intended for efficient evaporation or condensation with modern refrigerants, including low-density low-global-warming-potential refrigerants where the approved system design permits their use. Its corrugated plates form a permanently brazed, gasket-free heat-transfer pack with a compact footprint. In a vessel installation it may be integrated into a chiller, heat-pump, HVAC or other refrigeration package rather than serving as a general seawater cooler. As with other brazed exchangers, internal plate repair is not a normal onboard maintenance action and service focuses on clean circuits, correct flows and leak-free connections. The designation AC900 identifies a specific AC-series refrigeration brazed plate heat exchanger configuration in the supplied equipment list. Exact capacity, pressure and temperature limits, materials, connection details and internal configuration must be verified from the unit nameplate and manufacturer documentation; refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Model numberAC900
Plate count (min)10 plates
Plate count (max)218 plates
Max flow rate507.0 m3/h
Design pressure30 bar
Applicationevaporator/condenser, air conditioning and refrigeration
Plate materialStainless steel (AISI 316)
Brazing materialCopper
Manufacturer documentation

Images from manufacturer documentation.

Photos, drawings and page previews from this model’s datasheet or catalog.

“Introduction Alfa Laval AC brazed plate heat exchangers provide efficient heat transfer with a small footprint. They are specifically designed to work in air conditioning and refrigeration…”

Alfa Laval AC900 – Photo (3c0011bc5009_S1-2 S. 1)
Photo · 3c0011bc5009_S1-2 · S. 1
Alfa Laval AC900 – Photo (3c0011bc5009_S1-2 S. 1)
Photo · 3c0011bc5009_S1-2 · S. 1
Alfa Laval AC900 – Drawing (3c0011bc5009_S1-2 S. 2)
Drawing · 3c0011bc5009_S1-2 · S. 2
Alfa Laval AC900 – Page preview (3c0011bc5009_S1-2 S. 1)
Page preview · 3c0011bc5009_S1-2 · S. 1
Source: Alfa Laval AC900 datasheet, p. 1
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Trend inlet and outlet temperatures and pressures to identify gradual loss of thermal performance. Inspect the external plate pack, connections and supports for leakage, corrosion, vibration damage and excessive piping loads. Maintain upstream strainers and system cleanliness, and use only cleaning-in-place procedures compatible with the installed materials. Any indication of cross-contamination requires prompt investigation because the bonded plate pack is not normally opened for onboard repair; refer to the manufacturer documentation for test limits and cleaning criteria.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Because the bonded plate pack is a sealed assembly, the principal strategic spare is a correctly specified replacement heat exchanger where redundancy and trading pattern justify carrying one. Also consider connection seals, strainer elements, isolation-valve service kits and approved cleaning consumables. A replacement unit must match the original materials, connections, duty and approval requirements.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Alfa Laval equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Plate Heat Exchanger.

Other models of the same equipment type, Alfa Laval first.

By manufacturer Alfa LavalGEASondexFunkeKelvionHisakaTranterVahterusAPVTwin DiscYorkKelvion PHE GmbHSWEP (Sweden)A.S.T.R.A. REFRIGERANTI S.r.l.PTG FrioNordica ASAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Alfa Laval models More like AC900
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Alfa Laval AC900 — a part, a service call, a second opinion. Are you Alfa Laval? Claim this brand page.

Service engineer? Write the day report for this AC900 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.