TPW MK3
Skum/Tyco TPW MK3 — Wide-range bladder tank proportioner for flexible systems.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Annual foam solution sampling and laboratory ratio analysis; proportioner functional test at maximum and minimum design flow rates per EN 13565-1
Visual inspection of tank exterior for rust, corrosion, or damage; pressure test of tank shell at 1.5x design pressure; bladder elastomer condition assessment; check relief valve operation
Annual tank inspection for sludge accumulation; foam concentrate sampling and laboratory quality testing; check for separation or discoloration; verify storage temperature maintained within -2 to +60°C limits
Manual nozzle actuation test through full fog-to-jet range; visual inspection of nozzle orifice for debris or crystallization; flush test with clean water; verify elevation and rotation movement smoothness
Hydrostatic pressure test of main and branch piping at 1.5x operating pressure; measure water pressure at proportioner inlet, monitor connection, and deluge valve; flush entire piping system annually; inspect for rust or mineral deposits
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →