Submersible Pump · Pumps
This is an electrical submersible mini drainage pump. It is the Grindex Primo D4. The Primo D4 is designed for use in construction, industrial, and municipal dewatering applications. Its compact design allows it to operate where larger pumps might not fit. The Primo D4 has a 2" discharge connection with an ISO thread. Its rated power is 0.4 kW and its rated current at 230 V is 2.8 A. This pump can handle solids up to 7.5 mm in diameter. The Primo D4 weighs 9 kg, has a height of 325 mm, and a diameter of 183 mm. Its shaft speed is 2800 RPM. The pump has an IP 68 protection class. The maximum submersion depth is 5 meters (16.5 feet) and the maximum liquid temperature is 35 °C. The allowed pH range is 6.5-8. The pump top is made of aluminum, the outer casing (D4 & D8) is steel, the stator housing is aluminum, the motor shaft is stainless steel, the impeller (D4 & D8) is polyurethane, the diffuser (D4 & D8) is aluminum/rubber, and the screws and nuts are stainless steel. Accessories include a float switch.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
Source: pump-technology.com · not checked against a manufacturer datasheet
Photos, drawings and page previews from this model’s datasheet or catalog.
“Grindex Primo is a range of small, handy and affordable pumps, including two drainage and two sludge pumps. The Primo pumps are ideal for construction, industrial and municipal jobs, and the highly…”
| Insulation resistance test | every 3-6 months, or before use if the pump has been in storage |
|---|---|
| Seal oil chamber check | per the manufacturer's running-hour interval - confirm in the pump manual |
| Impeller/wear plate inspection | annually, or sooner after use in heavy debris |
| Cable and plug inspection | before each deployment |
Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.
As a portable emergency drainage pump it is normally checked as part of the vessel's fire/damage control equipment inventory rather than as a classed fixed item; verify it is on the approved emergency equipment list with a current functional test record, unless it is designated as a fixed emergency bilge pump, in which case it falls under the bilge system survey.
Free of charge — send us your request for Grindex equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Grindex first.
Tell us what you need for this Grindex Primo D4 — a part, a service call, a second opinion. Are you Grindex? Claim this brand page.
Service engineer? Write the day report for this Primo D4 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.