OceanSphereENGINES
Library› Engine Room› Air Compressors› Air Compressor› Tamrotor Marine Compressors (TMC) 185-10 EWNA

185-10 EWNA

Air Compressor · Air Compressors

Technical data from manufacturer or class sources · not yet verified by a person​‍​⁠‍​⁠⁠⁠⁠‍​​‍⁠‍⁠⁠‌​

Tamrotor Marine Compressors (TMC) TMC 185-10 EWNA — Marine Service/Control Air.

Specifications

Technical data.

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Reference values — not verified
Pressure Rating10 bar
Displacement185 cc/rev

Source: tmc.com · not checked against a manufacturer datasheet

Inspection

Inspector Detail

Common issues

  • Air/oil separator element clogging, causing oil carryover and reduced output pressure
  • Oil cooler/aftercooler fouling reducing cooling efficiency
  • Minimum pressure/check valve sticking, causing slow pressure build-up or backflow
  • Water contamination in compressor oil from a cooling system leak
  • Intake filter blockage reducing capacity
  • Rotor bearing wear causing increased noise/vibration
  • Safety/relief valve failing to lift at set pressure
  • Drive coupling wear causing slip or vibration

Inspection checklist

  • Check oil level and condition, test for water contamination
  • Inspect/replace air intake filter per interval
  • Check air/oil separator differential pressure
  • Function test the safety relief valve
  • Inspect drive coupling condition and alignment
  • Check cooling water flow and inspect heat exchanger for fouling
  • Verify automatic condensate drain/trap operation
  • Check unloader/capacity control function
  • Vibration and noise check against baseline
  • Inspect pressure gauges and control panel alarms

Service intervals

Oil and oil filter changetypically every 2000-4000 running hours or annually - confirm against Tamrotor manual
Air/oil separator elementtypically every 2000-4000 running hours
Intake filterclean/replace per condition, more often in dusty environments
Safety relief valve function testannual
Major overhaul (bearings/seals)per manufacturer interval, often in the 8000-16000h range - confirm against manual

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Typical wear limits

Safety relief valve set tolerancecommonly required to lift within about ±3% of design pressure - confirm against the valve's own certificate
Rotor/bearing clearancesmanufacturer-proprietary; check against the TMC overhaul manual for this model rather than a generic figure

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Air/oil separator element
  • Intake filter element
  • Minimum pressure valve
  • Oil filter
  • Drive coupling
  • Safety relief valve
  • Gasket/seal kit

Safety

  • Stored compressed air energy
  • Hot surfaces on compressor head and discharge piping
  • Oil mist/fire risk if the separator fails and hot oil contacts hot surfaces
  • Relief valve discharge hazard
  • Rotating shaft/coupling guards must be in place before running
  • Noise exposure

Class survey

Service/control air compressors are within periodic survey scope for essential auxiliary machinery. Class checks safety valve certification and testing, any associated air receiver as a separate pressure vessel item, and maintenance records against the vessel's approved planned maintenance system.

Estimated lifetime: Marine screw compressors of this class typically run in the order of 40,000-60,000 hours to first major overhaul under normal service/control air duty with proper maintenance - heavily dependent on duty cycle and air quality; treat as indicative only.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Tamrotor Marine Compressors (TMC) equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Air Compressor.

Other models of the same equipment type, Tamrotor Marine Compressors (TMC) first.

By manufacturer QuincySperreTamrotor Marine Compressors (TMC)HatlapaAtlas Copco MarineBauerTanabeHamworthyCorkenSauer CompressorsBurckhardt CompressionGardner DenverDeno CompressorsKasco MarineBelliss & MorcomAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Tamrotor Marine Compressors (TMC) models More like TMC 185-10 EWNA
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Tamrotor Marine Compressors (TMC) 185-10 EWNA — a part, a service call, a second opinion. Are you Tamrotor Marine Compressors (TMC)? Claim this brand page.

Service engineer? Write the day report for this 185-10 EWNA in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.