OceanSphereENGINES
Bibliothek› Engine Room› Hilfsdiesel› Hilfsdiesel (Generatorsatz)› MTU Onsite Energy Series 396 TB94 G-12cyl

Series 396 TB94 G-12cyl

Hilfsdiesel (Generatorsatz) · Hilfsdiesel

Technische Daten aus Hersteller- oder Klassequellen · noch nicht von Hand geprüft​‍​⁠​‌‌​‌​​⁠‍‍​‍⁠⁠‍‌
1.140 kWLeistung
12Zylinder
165 mmBohrung
175 mmHub

MTU Onsite Energy Series 396 TB94 G-12cyl — Mechanical, 12 cyl × 165mm bore, 1800 rpm, MGO, 1140 kW.

Technische Daten

Technische Daten.Referenz — nicht verifiziert

Haben Sie das Herstellerdatenblatt zu diesem Modell? Schicken Sie es mit dem Anfrageformular — wir prüfen es und nennen die Quelle.

BauformV
Drehzahl (1/min)1800
KraftstoffartMGO
TechnologieMechanical
Leistung (kW)1140
Inspektion

Inspektor-Detail ✓ verifiziert

Häufige Probleme

  • Fuel injector wear/clogging: Due to high precision and MGO quality variations, leading to poor combustion, increased exhaust temperatures, and reduced power. Look for black smoke and uneven cylinder temperatures.
  • Turbocharger bearing failure: High operating speeds and temperatures can lead to premature wear if lubrication is compromised or if there's foreign object damage. Listen for whistling/grinding noises, check for oil leaks at compressor/turbine ends, and excessive shaft play.
  • Cooling system blockages/leaks: Especially in the heat exchanger or intercooler, leading to elevated engine temperatures. Check for external leaks, coolant level drops, and differential pressure across coolers.
  • Lubricating oil consumption/pressure issues: Worn piston rings, valve guides, or turbocharger seals can increase oil consumption. Low oil pressure can indicate pump wear or bearing issues. Monitor oil levels and pressure gauges closely.
  • Vibration damper degradation: Critical for crankshaft longevity in V-configuration high-speed engines. Cracked or leaking dampers lead to increased torsional vibrations, potentially damaging crankshaft and bearings. Inspect visually for cracks or fluid leaks.
  • Valve train wear: Valve seat recession, worn valve guides, or incorrect valve clearances can lead to compression loss and reduced efficiency. Listen for excessive tappet noise.
  • Fuel pump element wear/calibration drift: Mechanical fuel pumps can suffer wear over time, leading to inconsistent fuel delivery between cylinders, affecting balance and performance. Check for uneven exhaust temperatures and cylinder load distribution.

Prüfliste

  • Visual inspection for leaks: Check all connections, seals, and components for oil, fuel, coolant, and exhaust gas leaks. Pay attention to fuel injection pump area, turbocharger connections, and cylinder heads.
  • Exhaust gas analysis: Observe color (should be clear/light haze), listen for pulsations, and check individual cylinder exhaust temperatures for uniformity (within +/- 20°C).
  • Engine operating parameters: Verify lube oil pressure (e.g., 4-6 bar), coolant temperature (e.g., 80-90°C), fuel pressure, and turbocharger boost pressure against manufacturer's specifications at various loads.
  • Turbocharger inspection: Check for excessive axial and radial play of the rotor shaft (should be minimal, typically less than 0.15mm axial, 0.30mm radial when cold). Inspect compressor and turbine blades for damage or fouling.
  • Engine mounts and flexible couplings: Inspect for signs of degradation, cracking, or excessive compression. Ensure all mounting bolts are secure and check for abnormal engine movement.
  • Fuel system integrity: Check fuel lines for chafing, leaks, and proper clamping. Inspect fuel filters for cleanliness and ensure no air ingress points. Verify fuel pump drive coupling condition.
  • Cooling system: Check coolant level, condition, and concentration. Inspect cooling pump for leaks and bearing noise. Ensure heat exchanger tubes are clean and free from blockages.
  • Electrical connections and sensors: Verify all wiring is secure, free from corrosion, and properly insulated. Check sensor integrity for critical parameters (oil pressure, coolant temp, overspeed).

Wartungsintervalle

Daily/WeeklyVisual checks, fluid levels (oil, coolant), log operating parameters.
250-500 hoursLube oil and lube oil filter change. Fuel filter change. Check air filter restriction.
1000-2000 hoursValve clearance check/adjustment. Injector nozzle inspection/testing. Turbocharger inspection. Cooling system flush and inhibitor check. Check drive belts.
4000-6000 hoursMinor overhaul/inspection. Fuel injection pump timing and calibration check. Cylinder head torque check. Vibration damper inspection. Starter motor and alternator inspection.
8000-12000 hoursTop overhaul (cylinder heads removed for inspection, valve grinding, injector sleeve replacement, piston ring inspection/replacement if accessible, liner wear measurement). Turbocharger overhaul.
20000-24000 hoursMajor overhaul (engine removal, crankshaft deflection check, main and connecting rod bearing replacement, complete engine strip-down and inspection).

Typische Verschleißgrenzen

Cylinder liner wear (max ovality/taper)0.05 - 0.10 mm beyond new dimensions (measured at top ring reversal point)
Crankshaft deflection (max deviation between webs)0.02 - 0.05 mm (depending on specific web pair and engine size)
Main/Connecting rod bearing clearance (max increase over new)0.05 - 0.10 mm
Valve seat recession (max depth from cylinder head surface)0.5 - 1.0 mm
Turbocharger rotor shaft play (axial)Max 0.15 - 0.20 mm
Turbocharger rotor shaft play (radial)Max 0.25 - 0.35 mm
Fuel injector opening pressure (deviation from spec)+/- 5 bar

Die Bereiche sind für diese Bauklasse typisch. Maßgeblich sind stets die Herstellerunterlagen zur jeweiligen Seriennummer.

Kritische Ersatzteile

  • Full set of fuel filter elements (primary & secondary)
  • Full set of lube oil filter elements
  • Set of injector nozzles or complete injectors (at least 1-2 per cylinder type)
  • High-pressure fuel pump elements (if applicable) or a complete unit pump
  • Turbocharger repair kit (bearings, seals) or a complete cartridge
  • Engine drive belts (alternator, cooling pump if external)
  • Assorted gaskets and O-rings (for common service points like filters, inspection covers)
  • Critical sensors (e.g., lube oil pressure, coolant temperature, overspeed)

Sicherheit

  • High-pressure fuel lines: Risk of fuel spray causing fire or severe injury. Always depressurize before working on the fuel system.
  • Hot surfaces: Exhaust manifold, turbocharger, and other engine components operate at very high temperatures, posing severe burn risks. Ensure proper insulation is maintained.
  • Rotating machinery: Belts, flywheel, and cooling fan (if applicable) present entanglement hazards. Ensure guards are in place and engine is secured before working.
  • Noise levels: High-speed diesel engines produce significant noise. Hearing protection is mandatory in the engine room.
  • Electrical hazards: High voltage from starter motor and alternator, potential for short circuits. Isolate power before working on electrical components.

Klassenbesichtigung

Class surveyors will focus on the engine's overall condition, maintenance records, and the functionality of safety and monitoring systems. Key checks include: 1. General Condition: Cleanliness, absence of leaks, proper securing of components. 2. Safety Devices: Verification of overspeed trip, low lube oil pressure shutdown, high coolant temperature shutdown, and emergency stop functionality. May require witnessing a test. 3. Performance Check: Observation of engine running under load, checking exhaust gas appearance, pressures, temperatures, and RPM stability. May request a load test. 4. Fuel System: Integrity of fuel lines, filters, and pumps. Verification of proper fuel oil treatment and filtration. 5. Lubrication System: Lube oil analysis reports, oil pressure at various loads, condition of filters. Verification of oil mist detector (if fitted). 6. Cooling System: Coolant levels, temperatures, pump condition, and heat exchanger cleanliness. Verification of alarm setpoints. 7. Exhaust System: Integrity of exhaust piping, insulation, and silencers. Absence of leaks. 8. Engine Mounts & Vibration: Inspection of engine mounts for degradation and assessment of engine vibration levels. 9. Documentation: Review of engine logbook, maintenance records, oil analysis reports, and previous survey reports.

Geschätzte Lebensdauer: 20,000 - 28,000 hours before major overhaul (assuming good maintenance and operating conditions)

Dieses Teil gesucht?

Angebot für dieses Modell anfragen.

Kostenlos — senden Sie uns Ihre Anfrage zu MTU Onsite Energy-Ausrüstung. Unser Team prüft sie und antwortet per E-Mail.

Für Schiffsausrüstung nennt kaum ein Hersteller oder Vertragshändler einen Preis, solange das Schiff unbekannt ist. Mit Schiffsangaben lässt sich Verfügbarkeit und Preis schneller klären; fehlen sie, müssen wir unter Umständen zuerst nachfragen, was einige Tage kostet. Dürfen Sie das Schiff nicht nennen, reicht ein Foto des Typenschilds — hängen Sie es unten an oder schicken Sie es als Antwort auf unsere Bestätigungsmail.

Ihre Kontaktdaten werden nicht veröffentlicht. Kein Konto nötig.
Verwandte Modelle

Auch in Hilfsdiesel (Generatorsatz).

Weitere Modelle desselben Ausrüstungstyps, zuerst MTU Onsite Energy.

Nach Hersteller CaterpillarMAN Energy SolutionsWärtsiläVolvo PentaScaniaMaK (Caterpillar)CumminsDeerePerkinsDaihatsuHanshinMTUYanmarBaudouinDeutzAlle HerstellerErsatzteile nach AusrüstungNeu hier? Kostenloses Konto anlegen Typenschild unleserlich? Probieren Sie den Typenschild-Scanner Alle MTU Onsite Energy-Modelle Ähnliche wie Series 396 TB94 G-12cyl
Mehr als das Datenblatt zeigt

Wir antworten per E-Mail, nie mit einer Automatik.

Sagen Sie uns, was Sie für diesen MTU Onsite Energy Series 396 TB94 G-12cyl benötigen — ein Ersatzteil, einen Serviceeinsatz, eine zweite Meinung. Sind Sie MTU Onsite Energy? Diese Herstellerseite beanspruchen.

Servicetechniker? Schreiben Sie den Tagesbericht für diesen Series 396 TB94 G-12cyl in OceanSphere Work — Fotos, Stunden und Teile, als PDF für den Reeder. 14 Tage kostenlos testen →

Häufig gefragt

Fragen, die bei dieser Ausrüstung aufkommen.

Sind die Daten dieses Modells kostenfrei?

Ja. Technische Daten, Dokumente und Servicehinweise zu diesem Modell sind ohne Konto lesbar. Ein Konto bringt gespeicherte Suchen und Anfragen dazu, es nimmt nichts weg.

Können Sie ein Teil genau für dieses Modell finden?

Ja. Nennen Sie uns Hersteller, Modell und Bedarf — ein Mensch liest jede Anfrage und antwortet per E-Mail.

Die Angaben scheinen falsch zu sein — was jetzt?

Schicken Sie uns das Typenschild oder den richtigen Wert. Wir prüfen ihn gegen das Herstellerdatenblatt oder den Klassifikationsdatensatz und aktualisieren die Seite.