Anchor Windlass · Anchor & Mooring Equipment
Generic Anchor Danforth HHP 2500kg is identified in the source list as a anchor windlass. It is installed on a reinforced forecastle, aft deck or offshore working deck aligned with the associated anchor chain or mooring lead. Its purpose is to pay out, recover, tension, guide or secure anchor chain or mooring lines according to the listed equipment type. The source record provides no additional model-specific operating figure beyond the listed designation and category. The arrangement may combine wildcats, drums, rollers, brakes, clutches, bearings, structural foundations and hydraulic or electric drive equipment. The exact model designation and any load information in the source distinguish capacity and configuration from neighboring mooring equipment; refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect brakes, clutches, wildcats, drums or rollers, shafts, bearings, gearcase, foundations and securing points appropriate to the equipment. Check hydraulic hoses and valves or electrical motors and controls where fitted. Lubricate specified points and inspect gear oil condition where applicable. Function-test local and remote controls and emergency stopping arrangements without exposing personnel to chain or snap-back danger zones. Examine high-load structural welds for corrosion, deformation or cracking. Refer to the manufacturer documentation for the exact figure for brake settings, allowable wear, test loads and inspection criteria.
Keep brake or locking service kits, seals, bearings, hydraulic hose or valve consumables where applicable, control switches and manufacturer-recommended clutch, roller or coupling parts. Heavy gears, shafts, drums and wildcats are normally strategic shore spares. Confirm exact parts from model and serial number.
Free of charge — we forward your request to qualified suppliers for equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Danforth HHP 2500kg — a part, a service call, a second opinion.
Service engineer? Write the day report for this Danforth HHP 2500kg in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.