Anchor Windlass · Anchor & Mooring Equipment
Generic Chain Cable Stud-Link Chain 97mm Grade R5 is listed as a Anchor Windlass within the Anchor & Mooring Equipment category. It is typically installed on the forecastle, aft mooring deck or other exposed deck station, connected to anchors, chain or mooring lines. Its engineering role is to handle, pay out, heave and secure anchor chain or mooring lines under controlled load. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect brakes, clutches, wildcats or drums, gear train, bearings, foundations and hydraulic/electrical drive components. Check guards, emergency stops, local controls and evidence of corrosion or leakage. Brake settings, allowable wear and load-test criteria must be taken from the manufacturer and vessel documentation.
Carry brake and seal service items, hydraulic hoses or fittings where applicable, control fuses/relays, lubrication consumables and maker-recommended bearings or clutch parts.
Free of charge — we forward your request to qualified suppliers for equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Stud-Link Chain 97mm Grade R5 — a part, a service call, a second opinion.
Service engineer? Write the day report for this Stud-Link Chain 97mm Grade R5 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.