Anchor Windlass · Anchor & Mooring Equipment
Hatlapa HW-50kN is a anchor windlass. It is installed on a reinforced forecastle, aft deck or offshore working deck aligned with the associated anchor chain, wire or mooring lead. Its purpose is to handle, tension, pay out, recover or secure anchor chain or mooring lines according to the equipment type. The machinery combines structural foundations with drums or wildcats, brakes, clutches, bearings, drive equipment and local or remote controls appropriate to the installed arrangement. The exact model designation distinguishes drive type, chain or wire arrangement and rated load from neighboring winch or windlass variants; refer to the manufacturer and vessel documentation for the exact figures.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect brakes, clutches, wildcats or drums, shafts, bearings, gearcase, foundations and all accessible securing points. Check hydraulic hoses and valves or electrical motors and controls according to the installed drive type. Lubricate specified points and inspect gear oil condition where applicable. Function-test local and remote controls and emergency stopping arrangements without exposing personnel to chain, wire or snap-back danger zones. Examine high-load structural welds for corrosion, deformation or cracking. Refer to manufacturer and class documentation for exact brake settings, allowable wear, test loads and inspection criteria.
Keep brake linings or service kits, seals, bearings, hydraulic hose or valve consumables where applicable, control switches and manufacturer-recommended clutch or coupling parts. Heavy gears, shafts, drums and wildcats are normally strategic shore spares rather than routine onboard stock. Confirm exact parts from the model and serial number.
Free of charge — send us your request for Hatlapa equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Hatlapa first.
Tell us what you need for this Hatlapa HW-50kN — a part, a service call, a second opinion. Are you Hatlapa? Claim this brand page.
Service engineer? Write the day report for this HW-50kN in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.