"> Sealite SL-60 Stern
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Sealite in the Maritime Network Find suppliers →
Sealite

SL-60 Stern

Sealite SL-60 Stern is a marine navigation or signal light. It is normally installed at the vessel position required by the approved navigation-light arrangement, with supply and monitoring connected to the bridge or distribution system. Its primary purpose is to display the prescribed visual indication for vessel aspect, status or signaling. Compared with ordinary deck lighting, navigation and signal lights are safety-critical and depend on correct colour, sector, visibility arrangement and fault indication. The supplied record already contains the available concise model or rating information, so those existing figures are not duplicated here and no additional meaning is inferred from the model code. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

led True
visibility nm 3

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Lamp, LED module or driver failure causes complete loss of the light or reduced intensity
Lens contamination, salt deposits or weathering reduces visible output and can distort the intended signal
Water ingress or corroded terminals causes intermittent operation, earth faults or failure
Incorrect alignment or damaged mounting changes the intended sector or orientation
Monitoring or supply-circuit faults cause false lamp-failure alarms or loss of bridge indication

Service & Maintenance

Inspect lens, housing, seals, mounting, alignment, cabling and supply monitoring. Confirm the correct light operates from the appropriate control circuit and that failure alarms work. Keep lenses clean and investigate corrosion or condensation. Exact sector and performance criteria require approved navigation-light documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry approved lamp or LED modules, drivers, fuses, seals, terminal parts and complete replacement lanterns for critical positions where vessel policy requires them.
Equipment Model #127352 · ✓ still in production