OceanSphereENGINES

RPU-80

Heading Control System · Autopilot & Bridge Systems

Class-certified type (DNV register) · technical data sheet not yet verified​‌⁠⁠​‌​‍⁠​‍⁠‌​‍‍‌⁠‍‍

Simrad RPU-80 is a autopilot or heading-control system (Autopilot & Bridge Systems / Heading Control System). It is normally installed at the bridge steering console with interfaces to steering and heading sensors. It is intended to control rudder commands so the vessel follows the selected heading or track mode. The meaning of any embedded size or rating code should be confirmed in manufacturer documentation. In service it interfaces with navigation sensors, bridge displays, ship power supply, data networks and alarms relevant to the equipment function.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Flow rate at 10 bar800 (49) cm3/min (cu.in/min)
Max. pressure60 bar
Power consumption2,4-6 A
Ram capacity min80 (4,9) cm3 (cu. in.)
Ram capacity max250 (15,2) cm3 (cu. in.)
TypeHydraulic Drive Unit
Manufacturer documentation

Images from manufacturer documentation.

Photos, drawings and page previews from this model’s datasheet or catalog.

This manual provides instructions for installing and maintaining reversible pumps RPU80, RPU160, and RPU300.

Applications

  • autopilot system installation

Features

  • installation guide
  • maintenance guide

Options

  • External rudder speed control potentiometer
  • Nomogram for pump selection
Source: Simrad RPU-80 datasheet, p. 8
Simrad RPU-80 – Photo (cfd05cd91d45_S3-38 S. 33)
Photo · cfd05cd91d45_S3-38 · S. 33
Simrad RPU-80 – Photo (cfd05cd91d45_S3-38 S. 35)
Photo · cfd05cd91d45_S3-38 · S. 35
Simrad RPU-80 – Drawing (cfd05cd91d45_S3-38 S. 21)
Drawing · cfd05cd91d45_S3-38 · S. 21
Simrad RPU-80 – Drawing (cfd05cd91d45_S3-38 S. 21)
Drawing · cfd05cd91d45_S3-38 · S. 21
Simrad RPU-80 – Drawing (cfd05cd91d45_S3-38 S. 3)
Drawing · cfd05cd91d45_S3-38 · S. 3
Simrad RPU-80 – Drawing (cfd05cd91d45_S3-38 S. 4)
Drawing · cfd05cd91d45_S3-38 · S. 4
Simrad RPU-80 – Drawing (cfd05cd91d45_S3-38 S. 6)
Drawing · cfd05cd91d45_S3-38 · S. 6
Simrad RPU-80 – Page preview (cfd05cd91d45_S3-38 S. 5)
Page preview · cfd05cd91d45_S3-38 · S. 5
Source: Simrad RPU-80 datasheet, p. 3
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Check power supplies, data interfaces, alarms, sensor health and agreement with independent navigation information where practical. Inspect external antennas, scanners or transducers as applicable and review fault logs and self-test results. Verify required backups, records and bridge procedures; exact calibration tolerances and test methods must follow manufacturer and statutory documentation.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Typical spares include approved fuses, cooling fans, display or keypad parts where supported, interface modules, data cables and selected sensor or antenna components according to the vessel's critical-spares policy.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Simrad equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Heading Control System.

Other models of the same equipment type, Simrad first.

By manufacturer MacTaggart ScottRolls-Royce / KongsbergJastramRexroth / BoschFrydenboHatlapaAnschützNavitron SystemsNavis EngineeringComNavPraxis AutomationSimradSperry MarineAlphatron MarineTelko Furuno / TECDISAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Simrad models More like RPU-80
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Simrad RPU-80 — a part, a service call, a second opinion. Are you Simrad? Claim this brand page.

Service engineer? Write the day report for this RPU-80 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.