"> Caterpillar 6LC6.6-60Hz
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 101 verified suppliers & service companies for Caterpillar in the Maritime Network Find suppliers →
Is Caterpillar your company? Claim this page
Caterpillar

6LC6.6-60Hz

The Caterpillar 6LC6.6-60Hz is a medium‑speed, 4‑stroke diesel auxiliary engine coupled to a generator set delivering about 228 kW (285 kVA) at 1800 rpm for shipboard electrical power.

Caterpillar 6LC6.6-60Hz
240.0 kW
Power

Engine Specifications

6
Cylinders
105 mm
Bore
127 mm
Stroke
4-stroke
Stroke Type

Components & Design

Component data being added…

Technical Data

Bohrung 580 mm (Quelle: Maritime Reporter 1986)
Hub 600 mm (Quelle: Maritime Reporter 1986)
6M601 Leistung 5.880 kW @ 425 rpm (Quelle: Skyline Ships)
8M601 Leistung 8.000 kW (Quelle: Maritime Reporter 1986)
8M601 SFOC 125 g/kWh or 124 g/PSh (optimized, source: OSTI/Maritime Reporter 1986)
Motortyp 4-Takt Diesel, großer Hub (Long-Stroke), Medium-Speed
Gewicht (8M601) 140 Tonnen (Quelle: Web-Recherche)
Brennstoff HFO, MGO, Diesel, Gas, Dual Fuel capable (Quelle: Skyline Ships)
Hersteller Maschinenbau Kiel (MaK), jetzt Caterpillar Motoren (seit 1997 Caterpillar)
power kw 240
rpm 1800
fuel type MDO
configuration L
genset kw 228
genset kva 285
frequency hz 60

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Camshaft bearing wear and cam follower wear with excessive axial clearance

Visual inspection of camshaft bearings for wear/scratches, measure axial clearance, check for metallic rattle from valve cover on cold start

Crankshaft bearing wear with crosshead pin scratches and potential bearing shell cracking

Install/check thermoelectric monitoring system; inspect shaft journals for scratches/polishing; measure bearing clearances

Cylinder liner uneven wear and honing mark surface finish wear

Perform channel video endoscopy; laser measurements for out-of-roundness and wear (limit >0.4–0.8% Ø), check surface finish; inspect piston-to-liner scratch marks

Piston ring wear with compression loss and blow-by signs

Perform compression tester; check piston crown for cracks and ring groove wear; measure ring free plays; check crosshead piston pin wear

Exhaust valve wear, carbon deposits and seat leakage

Perform valve seat measurement with go/no-go gauge, check surface finish, perform leakage test with compression tester, inspect valve crown for erosion/deposits

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Caterpillar?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #126545 · ✓ still in production