⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 134 verified suppliers & service companies for Caterpillar in the Maritime Network
Find suppliers →
Caterpillar
16VC175-16-GS-60Hz
The Caterpillar 16VC175-16-GS-60Hz is a 16‑cylinder V‑type auxiliary diesel engine coupled to a generator set delivering about 2.8 MW (3,515 kVA) at 60 Hz, primarily used for shipboard hotel and emergency power.
2960.0 kW
Power
Engine Specifications
16
Cylinders
175 mm
Bore
220 mm
Stroke
4-stroke
Stroke Type
Components & Design
Component data being added…
Technical Data
Bohrung
320 mm
Hub (Reihe)
480 mm
Hub (V-Form VM32C)
480 mm (teilweise Quellen: 420 mm, Widerspruch in Sekundärdatenbanken)
Typ
4-Takt Langsamläufer, Mittelschnellläufer, direkte Einspritzung, Turbogefeuert
Brennstoff
MDO, LBF, HFO, Ultra-Low-Sulphur Fuel (75% der Flotte auf HFO)
Einführungsjahr
1994
Turbolader
Hocheffiziente Ausführung, korrosionsfreies Gehäuse ohne Wasserkühlung
Abgasnorm
IMO Tier II (IMO II)
Marktabsatz
1600+ Einheiten seit 1994 (80% Propulsion, 20% Genset)
power kw
2960
rpm
1800
fuel type
MDO
configuration
V
genset kw
2812
genset kva
3515
frequency hz
60
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
SFOC specification and boost pressure: different efficiency values depending on configuration and load range documented (177–179 g/kWh); optimization of fuel consumption
Turbocharger wear: High-efficiency design with 'low wear rate due to calibration ring' is described; durably constructed, but specific wear
Fuel quality: Required for HFO operation — contamination and sulphur content are risks; 75% of the fleet runs on HFO, therefore high management risk
Lagerschale-Überwachung: Caterpillar bietet optionales 'Crankshaft Bearing Condition Monitoring System' an — deutet auf Lagerverschleiß als Inspektionsthema hin
Cooling system corrosion at seawater inlet: Indications of typical marine corrosion in cooling systems with seawater cooling; anodes and flushing required
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documents🛠 Manage this equipment in your fleet
Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →🔎 Suppliers & service for this equipment
Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Caterpillar?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #124989
· ✓ still in production