"> MaK (Caterpillar) 12VM32C-GS-60Hz
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
MaK (Caterpillar)

12VM32C-GS-60Hz

The MaK 12VM32C‑GS‑60Hz is a 12‑cylinder V‑type, four‑stroke diesel generator set delivering about 5.3 MW (≈6.7 MVA) at 900 rpm for shipboard auxiliary power.

MaK (Caterpillar) 12VM32C-GS-60Hz
5640.0 kW
Power

Engine Specifications

12
Cylinders
320 mm
Bore
480 mm
Stroke
4-stroke
Stroke Type

Components & Design

Component data being added…

Technical Data

Bohrung 320 mm
Hub (Reihe) 480 mm
Hub (V-Form VM32C) 480 mm (teilweise Quellen: 420 mm, Widerspruch in Sekundärdatenbanken)
Typ 4-Takt Langsamläufer, Mittelschnellläufer, direkte Einspritzung, Turbogefeuert
Brennstoff MDO, LBF, HFO, Ultra-Low-Sulphur Fuel (75% der Flotte auf HFO)
Einführungsjahr 1994
Turbolader Hocheffiziente Ausführung, korrosionsfreies Gehäuse ohne Wasserkühlung
Abgasnorm IMO Tier II (IMO II)
Marktabsatz 1600+ Einheiten seit 1994 (80% Propulsion, 20% Genset)
power kw 5640
rpm 900
fuel type HFO/MDO
configuration V
genset kw 5358
genset kva 6698
frequency hz 60

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

SFOC specification and boost pressure: different efficiency values depending on configuration and load range documented (177–179 g/kWh); optimization of fuel consumption
Turbocharger wear: High-efficiency design with 'low wear rate due to calibration ring' is described; durably constructed, but specific wear
Fuel quality: Required for HFO operation — contamination and sulphur content are risks; 75% of the fleet runs on HFO, therefore high management risk
Lagerschale-Überwachung: Caterpillar bietet optionales 'Crankshaft Bearing Condition Monitoring System' an — deutet auf Lagerverschleiß als Inspektionsthema hin
Cooling system corrosion at seawater inlet: Indications of typical marine corrosion in cooling systems with seawater cooling; anodes and flushing required

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Equipment Model #125201 · ✓ still in production