"> Meiko M-iClean
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 5 verified suppliers & service companies for Meiko in the Maritime Network Find suppliers →
Meiko

M-iClean

The Meiko M-iClean is a marine‑grade dishwasher for galley and domestic applications, delivering up to 15 kW of power with an integrated booster heater to provide 65 °C wash and 85 °C rinse cycles. The supplied category identifies the equipment as Galley Cooking Equipment, and it is normally installed in the galley, pantry, cold room or laundry with secure marine mounting and the required electrical, water, drain, gas, refrigerant or ventilation services. In that listed role, its primary purpose is to perform food preparation, cold storage or textile-service duties for crew and passengers. Compared with domestic appliances, marine service requires secure installation, dependable safety controls and tolerance of repeated operation in a moving and humid environment. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. The source metadata also states power: 15.0 kW; capacity: 60-120 racks/hr. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

15.0 kW
Power
60-120 racks/hr
Capacity
Food Preparation / Cooking
Medium

Components & Design

Component data being added…

Technical Data

power kw 15
type Marine Dishwasher

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Heating, refrigeration or drive-component failure causes poor performance, slow cycles or inability to operate
Temperature sensor, thermostat or control faults cause unstable operation or protective shutdown
Door seal, hose, drain or valve deterioration causes leakage, heat loss or water accumulation
Fan, pump, motor or bearing wear causes abnormal noise, reduced circulation or vibration
Electrical, ignition or safety-interlock faults cause failed starts, nuisance trips or error indications

Service & Maintenance

Inspect seals, controls, heaters or refrigeration components, pumps or fans, water and drain connections, ventilation and secure mounting according to the appliance type. Clean grease, lint, scale or food residues from approved areas. Verify safety interlocks and look for heat-damaged wiring or refrigerant leakage. Refer to the manufacturer documentation for the exact figure for temperature, loading and service criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry seals, sensors, fuses, control relays, pump or fan parts, heating or ignition components and appliance-specific consumables.
Equipment Model #1156 · ✓ still in production