OceanSphereENGINES
Library› Cargo› Tank Cleaning Equipment› Programmable Tank Cleaning Machine› Alfa Laval/Gamajet GJ4 10m dia 30m3h 12bar

GJ4 10m dia 30m3h 12bar

Programmable Tank Cleaning Machine · Tank Cleaning Equipment

Class-certified type (DNV register) · technical data sheet not yet verified​‌‍‌‌‌‍⁠⁠‌‌‌‌‍⁠​⁠‌‍‌

Alfa Laval Gunclean Toftejorg tank cleaning machine. Alfa Laval (formerly the Toftejorg Group, acquired in 2003) specialises in fully programmable shipboard tank cleaning machines using turbine-driven rotary technology. Gunclean Toftejorg units are designed mainly as fixed installations in crude oil, product and chemical tankers, and for offshore applications.

Specifications

Technical data.

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Coverage Diameter (m)10
Flow Rate (m³/h)30
Pressure (bar)12
Rotation Typeprogrammable
Mediawater
Inspection

Inspector Detail

Common issues

  • Drive turbine or gear train wear causing erratic or stalled indexing between programmed positions
  • Nozzle wear enlarging orifice diameter and reducing jet impact and coverage
  • Deck seal/gland leakage allowing tank atmosphere or cleaning medium to escape
  • Programming unit losing calibration, causing incomplete tank coverage
  • Bearing wear in the machine head from continuous rotation under pressure
  • Corrosion or fouling of the machine when left in an aggressive cargo tank atmosphere between uses
  • Hose/coupling wear at the supply connection from repeated pressure cycling

Inspection checklist

  • Function-test the full programmed cycle before tank entry and confirm the coverage pattern matches spec
  • Check nozzle bore diameter against the maker's new-build size for wear/enlargement
  • Inspect the deck seal/stuffing box for leakage during a pressure test
  • Check the drive gearbox/turbine for correct rotation speed and smooth indexing
  • Inspect the body and head for corrosion, cracks or impact damage
  • Check supply hose, couplings and isolation valves for leaks or damage
  • Confirm the machine can be fully retracted/isolated from the tank when not running
  • Confirm pressure and flow at the machine match the programmed design values

Service intervals

Nozzle inspection/replacementannually or after each major tank cleaning campaign, whichever is sooner
Gearbox/turbine drive serviceper the maker's manual, typically annually or every 1,000-2,000 operating hours
Deck seal/gland renewalat drydock or when leakage is detected
Full function test of the programmed cyclebefore each tank cleaning operation

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Typical wear limits

Nozzle bore diametercleaning pressure and coverage fall off once bore wear exceeds roughly 5-10% over the as-new diameter - confirm against the maker's replacement criteria

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Nozzle set matched to the machine
  • Deck seal / stuffing box seal kit
  • Drive gearbox seal and bearing kit
  • Supply hose and coupling set

Safety

  • High-pressure water jet - never approach or service the machine while pressurized or during a cleaning cycle
  • Tank cleaning is normally an enclosed-space operation - follow gas-freeing and enclosed-space entry procedures; this equipment does not replace them
  • Static electricity generation from high-velocity jetting in flammable cargo tanks - confirm bonding/earthing and cargo compatibility before use
  • Deck seal failure under pressure can eject tank atmosphere or liquid - inspect before each use

Class survey

Tank cleaning machines are not typically a standalone class survey item, but their deck seals and isolation arrangements are checked as part of cargo tank and piping integrity surveys on tankers; keep function-test and nozzle-wear records to support planned maintenance system evidence.

Estimated lifetime: Programmable tank cleaning machines commonly remain in service 10-15+ years with periodic nozzle, seal and gearbox renewal; actual life depends heavily on cargo aggressiveness and cleaning frequency

Need this part?

Request a quote for this model.

Free of charge — send us your request for Alfa Laval/Gamajet equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Programmable Tank Cleaning Machine.

Other models of the same equipment type, Alfa Laval/Gamajet first.

By manufacturer Alfa Laval/ButterworthAlfa Laval/ToftejorgCloud MarineAlfa Laval/GamajetScanjet MarineTS MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Alfa Laval/Gamajet models More like GJ4 10m dia 30m3h 12bar
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Alfa Laval/Gamajet GJ4 10m dia 30m3h 12bar — a part, a service call, a second opinion. Are you Alfa Laval/Gamajet? Claim this brand page.

Service engineer? Write the day report for this GJ4 10m dia 30m3h 12bar in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.