Skip to content
OceanSphereENGINES
Library › Inspection & safety data › Approvals
Inspection & safety data

Look up approvals

Entries from public approval registers, searchable by manufacturer. Only number, body, status and validity as listed in the register are shown.

21,417 entries. The status is taken from the register as of the retrieval date (see source); the register itself is authoritative.

ManufacturerProductTypeNumberBodyStatusvalid untilSource
JOHNS-MANVILLE"Incombustible Hullboard" fibrous glass type noncombustible material approved in nominal density of 3 lbs/cu. ft. (48.0 kg/cu. m).NON-COMBUSTIBLE MATERIALcgmix:14517USCGFORMER-MAY USE2006-11-26USCG CGMIX Approved Equipment
JOHNS MANVILLE"Incombustible Microlite" fiberglass insulation approved in nominal density of 12 kg/cu. m (0.75 lb/cu. ft.)NON-COMBUSTIBLE MATERIALcgmix:14714USCGFORMER-MAY USE2003-08-16USCG CGMIX Approved Equipment
JOHNS-MANVILLE"Incombustible Microlite" fibrous glass insulation, density 0.6 to 3 lb./cu . ft.NON-COMBUSTIBLE MATERIALcgmix:14499USCGFORMER-DO NOT USE1993-07-21USCG CGMIX Approved Equipment
JOHNS MANVILLE"Incombustible Microlite" glass-fiber blanket insulation approved as meeting Part 1 of Annex 1 of the 2010 IMO FTP Code in nominal density of 0.75 lb/ft3 (12.0 kg/m3).NON-COMBUSTIBLE MATERIAL (IMO)cgmix:15111USCGAPPROVED2029-11-15USCG CGMIX Approved Equipment
JOHNS MANVILLE"Micro-Lok HP and Micro-Lok HP Ultra, Plain (unjacketed) Pipe Insulation", approved as meeting Part 1 of Annex 1 of the 2010 IMO FTP Code in nominal density of 3.3 pcf (53 kg/m3).NON-COMBUSTIBLE MATERIAL (IMO)cgmix:15129USCGAPPROVED2030-10-27USCG CGMIX Approved Equipment
JOHNS-MANVILLE"Microlok" fiberglass pipe insulation, approved in nominal density of 3 1/3 to 4 pounds per cubic foot (50 to 60 kg/cu. m).NON-COMBUSTIBLE MATERIALcgmix:14699USCGFORMER-MAY USE2005-11-15USCG CGMIX Approved Equipment
JOHNS-MANVILLE"Microlok" fiberglass pipe insulation, approved in nominal density of 3.6 lb/cu. ft. (57.6 kg/cu. m) to 5.0 lb/cu. ft (80.0 kg/cu. m).NON-COMBUSTIBLE MATERIALcgmix:14724USCGFORMER-MAY USE2001-12-19USCG CGMIX Approved Equipment
JOHNS-MANVILLE"Microlok" fiberglass pipe insulation, approved in nominal density of 3.6 lb/cu. ft. (57.6 kg/cu/m) to 5.0 lb/cu. (80.0 kg cu. m).NON-COMBUSTIBLE MATERIALcgmix:14723USCGFORMER-MAY USE2001-08-26USCG CGMIX Approved Equipment
JOHNS-MANVILLE"Microlok", fiberglass pipe insulation, density 3-1/2 to 4 lb./cu. ft.NON-COMBUSTIBLE MATERIALcgmix:14672USCGFORMER-MAY USE1990-11-15USCG CGMIX Approved Equipment
Johns Manville"MinWool Marine A-60" meeting Class A-60 insulation criteria of Part 3 of Annex 1 of the IMO 2010 FTP Code for steel bulkheads and decks. The nominal density is 7 lbs/cubic foot (112 kg per cubic meter) with 10% tolerance.STRUCTURAL INSULATION A-CLASS (IMO)cgmix:15021USCGAPPROVED2027-05-22USCG CGMIX Approved Equipment
Johns Manville"MinWool Marine Pipe" insulation approved as meeting Part 1 of Annex 1 of the IMO FTP Code in nominal density of 8 pounds per cubic foot (128 kg per cubic meter).NON-COMBUSTIBLE MATERIAL (IMO)cgmix:15118USCGFORMER-MAY USE2022-06-07USCG CGMIX Approved Equipment
JOHNS-MANVILLE"Precipitator Spin-Glass", insulation noncombustible material, approved in nominal density of 2.3 pound/cubic foot (36.8 kg/cu. m).NON-COMBUSTIBLE MATERIALcgmix:14621USCGFORMER-MAY USE2006-11-26USCG CGMIX Approved Equipment
JOHNS MANVILLE"Structo-Guard" amorphous glass blanket type structual insulation in nominal density of 7 1/4 lb/cu. ft. (116 kg/cu. meter).STRUCTURAL INSULATIONcgmix:14315USCGFORMER-MAY USE1999-10-17USCG CGMIX Approved Equipment
JOHNS-MANVILLE"Thermo-12" pipe and block insulation approved in nominal density of 12- 17lb/cu. ft (192-204 kg/cu.m).NON-COMBUSTIBLE MATERIALcgmix:14565USCGFORMER-MAY USE2002-07-28USCG CGMIX Approved Equipment
JOHNS-MANVILLE#450 CEMENT mineral wool cement type, Class A-60 in a 3-1/2 in thickness and 30 lb/cu ft density.STRUCTURAL INSULATIONcgmix:14264USCGFORMER-MAY USE1974-06-04USCG CGMIX Approved Equipment
JOHNS-MANVILLEASBESTOCITE A and ASBESTOCITE B, asbestos cement board type, approved in a density of 105 lb/cu ft.NON-COMBUSTIBLE MATERIALcgmix:14492USCGFORMER-DO NOT USE1972-07-21USCG CGMIX Approved Equipment
JOHNS-MANVILLEBANROC 202AA mineral wool type blankets with asbestos paper facings, Class A-60 in a 3 in thickness and 16 lb/cu ft density.STRUCTURAL INSULATIONcgmix:14266USCGFORMER-MAY USE1974-06-04USCG CGMIX Approved Equipment
JOHNS-MANVILLEBX SPINTEX mineral wool type, Class A-60 in a 3 in thickness at 8 lb/cu ft density, and 4 in thickness at 6 lb/cu ft density.STRUCTURAL INSULATIONcgmix:14263USCGFORMER-MAY USE1971-12-30USCG CGMIX Approved Equipment
JOHNS-MANVILLEBX-SPINTEX, mineral wool insulation type, approved in a density range of 5 to 8 lb/cu ft.NON-COMBUSTIBLE MATERIALcgmix:14456USCGFORMER-DO NOT USE1972-08-03USCG CGMIX Approved Equipment
JOHNS-MANVILLECEL-O-CRETE magnesite type, Class A-60 in a 1-3/4 in thickness.DECK COVERING FOR MERCHANT VESSELScgmix:14216USCGFORMER-MAY USE1963-12-31USCG CGMIX Approved Equipment
JOHNS-MANVILLECELLAMITE, asbestos paper type.NON-COMBUSTIBLE MATERIALcgmix:14477USCGFORMER-DO NOT USE1966-10-25USCG CGMIX Approved Equipment
JOHNS MANVILLEHTB-26 fiberglass insulation in density of 1.1 pcf +/- 0.11 pcf (17.6 +/- 1.8 kg/cu. meter) approved as meeting Part 1 of Annex 1 of the IMO 2010 FTP Code.NON-COMBUSTIBLE MATERIAL (IMO)cgmix:17298USCGAPPROVED2029-11-15USCG CGMIX Approved Equipment
JOHNS-MANVILLEINCOMBUSTIBLE HULLBOARD SGC, fibrous glass type, approved in a density of 2.77 lb/cu ft.NON-COMBUSTIBLE MATERIALcgmix:14548USCGFORMER-DO NOT USE1972-06-14USCG CGMIX Approved Equipment
JOHNS-MANVILLEINCOMBUSTIBLE HULLBOARD, aluminum foil faced fibrous glass type, approved in a density of 3 lb/cu ft, 1 in through 2 in thickness.NON-COMBUSTIBLE MATERIALcgmix:14552USCGFORMER-DO NOT USE1980-11-12USCG CGMIX Approved Equipment
JOHNS-MANVILLEJ-M 301 CEMENT.NON-COMBUSTIBLE MATERIALcgmix:14520USCGFORMER-DO NOT USE1971-07-27USCG CGMIX Approved Equipment
JOHNS-MANVILLEJ-M 302 CEMENT, composed solely of asbestos fibers, diatomaceous silicas, and clay.NON-COMBUSTIBLE MATERIALcgmix:14474USCGFORMER-DO NOT USE1972-07-21USCG CGMIX Approved Equipment
JOHNS-MANVILLEJ-M 32-LB COMMERCIAL GRADE ASBESTOS PAPER, asbestos paper type, approved in a weight of 32 lb/100 sq ft.NON-COMBUSTIBLE MATERIALcgmix:14466USCGFORMER-DO NOT USE1982-12-08USCG CGMIX Approved Equipment
JOHNS-MANVILLEJ-M 85% MAGNESIA, magnesia block type.NON-COMBUSTIBLE MATERIALcgmix:14459USCGFORMER-DO NOT USE1972-07-21USCG CGMIX Approved Equipment
JOHNS-MANVILLEJ-M AIRACOUSTIC SHEET, mineral wool type board, minimum for Class A-60 requirements: 2 in at 18 lb/cu ft.STRUCTURAL INSULATIONcgmix:14273USCGFORMER-MAY USE1952-10-01USCG CGMIX Approved Equipment
JOHNS-MANVILLEJ-M BX-18, mineral wool type board, minimum for Class A-60 requirements, 2 in at 18 lb/cu ft.STRUCTURAL INSULATIONcgmix:14265USCGFORMER-MAY USE1952-10-01USCG CGMIX Approved Equipment
JOHNS-MANVILLEJ-M FOIL-FACED MARINE BX SPINTEX DUCT INSULATION, aluminum faced mineral wool type, approved in a density range of 3.25 to 6.0 lb/cu ft.NON-COMBUSTIBLE MATERIALcgmix:14522USCGFORMER-DO NOT USE1971-12-30USCG CGMIX Approved Equipment
JOHNS-MANVILLEJ-M FOIL-FACED MARINE MICROLITE DUCT INSULATION, aluminum faced fibrous glass insulation type, aproved in a density range of .6 to 2 lb/cu ft.NON-COMBUSTIBLE MATERIALcgmix:14523USCGFORMER-DO NOT USE1974-06-10USCG CGMIX Approved Equipment
JOHNS-MANVILLEJ-M FOIL-FACED MARINE SPIN-GLAS DUCT INSULATION, aluminum faced fibrous glass type, approved in a density of 3 lb/cu ft.NON-COMBUSTIBLE MATERIALcgmix:14535USCGFORMER-DO NOT USE1977-08-02USCG CGMIX Approved Equipment
JOHNS-MANVILLEJ-M MARINE ACOUSTICAL UNIT, mineral wool type board with perforated J-M Marine Veneer, minimum for Class A-60 requirements: 2 in at 18 lb/cu ft.STRUCTURAL INSULATIONcgmix:14274USCGFORMER-MAY USE1952-10-01USCG CGMIX Approved Equipment
JOHNS-MANVILLEJ-M SIX-POUND REINFORCED ASBESTOS PAPER, asbestos paper type, approved in a weight of 6 lb/100 sq ft.NON-COMBUSTIBLE MATERIALcgmix:14465USCGFORMER-DO NOT USE1980-12-08USCG CGMIX Approved Equipment
JOHNS-MANVILLEJ.M. N.B.R. 505 CEMENT, composed entirely of vermiculite, bentonite, mineral wool, and strand fiber glass.NON-COMBUSTIBLE MATERIALcgmix:14570USCGFORMER-DO NOT USE1976-02-11USCG CGMIX Approved Equipment
JOHNS-MANVILLEJOHNS-MANVILLE MARINE ACOUSTICAL UNIT, approved in a thickness range of 1-3/16 through 2-3/16 in.NON-COMBUSTIBLE MATERIALcgmix:14469USCGFORMER-DO NOT USE1980-01-22USCG CGMIX Approved Equipment
JOHNS-MANVILLEMARINE VENEER, inorganic heavy density panel, Class B-15 on an inch for inch basis with the minimum MARINITE 23 or 36 core.BULKHEAD PANELScgmix:14338USCGFORMER-MAY USE1980-06-22USCG CGMIX Approved Equipment
JOHNS-MANVILLEMARINE VENEER, unperforated, inorganic heavy density sheets.NON-COMBUSTIBLE MATERIALcgmix:14566USCGFORMER-DO NOT USE1980-12-08USCG CGMIX Approved Equipment
JOHNS-MANVILLEMARINITE 36, noncombustible binder board, Class B-15 in a 3/4 in thickness.BULKHEAD PANELScgmix:14335USCGFORMER-MAY USE1980-12-08USCG CGMIX Approved Equipment
JOHNS-MANVILLEMARINITE ABK, hollow, ribbed, incombustible vinder board, Class B-15 in a 2 in thickness.BULKHEAD PANELScgmix:14369USCGFORMER-MAY USE1979-04-05USCG CGMIX Approved Equipment
JOHNS-MANVILLEMARINITE XL, asbestos-free calcium silicate composition board, Class B-15 in a 3/4 in thickness.BULKHEAD PANELScgmix:14388USCGFORMER-MAY USE1980-12-08USCG CGMIX Approved Equipment
JOHNS-MANVILLEMARINITE XL-S, asbestos-free calcium silicate composite, Class B-15 in a 3/4 in thickness.BULKHEAD PANELScgmix:14389USCGFORMER-MAY USE1980-12-08USCG CGMIX Approved Equipment
JOHNS-MANVILLEMARINITE-23, inorganic composition board, Class B-15 in a 3/4 in thickness.BULKHEAD PANELScgmix:14349USCGFORMER-MAY USE1980-12-08USCG CGMIX Approved Equipment
JOHNS-MANVILLEMARINITE-30, incombustible binder board, Class B-15 in a 3/4 in thickness.BULKHEAD PANELScgmix:14336USCGFORMER-MAY USE1979-04-05USCG CGMIX Approved Equipment
JOHNS-MANVILLEMARINITE-65, noncombusible binder board, Class B-15 in a 3/4 in thickness.BULKHEAD PANELScgmix:14337USCGFORMER-MAY USE1984-11-21USCG CGMIX Approved Equipment
JOHNS-MANVILLEMICROLITE .6# DENSITY, glass fiber insulation type.NON-COMBUSTIBLE MATERIALcgmix:14473USCGFORMER-DO NOT USE1965-04-12USCG CGMIX Approved Equipment
JOHNS-MANVILLEMICROTEX - 32-308, glass fiber insulation type, approved in a density of 3/4 lb/cu ft.NON-COMBUSTIBLE MATERIALcgmix:14478USCGFORMER-DO NOT USE1971-10-26USCG CGMIX Approved Equipment
Johns ManvilleMinWool-1200 Industrial Board approved as meeting Part 1 of Annex 1 of the IMO 2010 FTP Code in nominal density of 4 to 12 pounds per cubic foot (64 to 192 kg per cubic meter).NON-COMBUSTIBLE MATERIAL (IMO)cgmix:15081USCGAPPROVED2027-06-07USCG CGMIX Approved Equipment
JOHNS-MANVILLESUPER-FINE 050B, glass fiber insulation type, approved in a density of 1/2 lb/cu ft.NON-COMBUSTIBLE MATERIALcgmix:14476USCGFORMER-DO NOT USE1966-10-25USCG CGMIX Approved Equipment